79 LEATHER INDUSTRY

Classify: 
Quantity: 
CSN EN 15987 - Leather - Terminology - Key definitions for the leather trade 
CSN EN 15987
 
790015
Released:  2011
CSN EN 15987 - Leather - Terminology - Key definitions for the leather trade
EN 15987This description is for standard: EN 15987This European Standard specifies the key terms and definitions used for the leather trade. Defined parameters in this standard need to be assessed usi
in stock
Price: 72,- USD
CSN EN ISO 4044 - Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008) 
CSN EN ISO 4044
 
792005
Released:  2008
CSN EN ISO 4044 - Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)
EN ISO 4044This description is for standard: EN ISO 4044ISO 4044:2008 specifies a method for the preparation of a test sample of leather for chemical analysis. This method is applicable to all types o
in stock
Price: 72,- USD
CSN EN ISO 5399 - Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984) 
CSN EN ISO 5399
 
792008
Released:  1998
CSN EN ISO 5399 - Leather - Determination of water-soluble magnesium salts - EDTA titrimetric method (ISO 5399:1984)
EN ISO 5399This description is for standard: EN ISO 5399
in stock
Price: 65,- USD
CSN EN ISO 11642 - Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993) 
CSN EN ISO 11642
 
792010
Released:  1998
CSN EN ISO 11642 - Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:1993)
EN ISO 11642This description is for standard: EN ISO 11642
in stock
Price: 72,- USD
CSN EN ISO 11643 - Leather - Tests for colour fastness - Colour fastness of small samples to solvents 
CSN EN ISO 11643
 
792011
Released:  2009
CSN EN ISO 11643 - Leather - Tests for colour fastness - Colour fastness of small samples to solvents
EN ISO 11643This description is for standard: EN ISO 11643ISO 11643:2009 specifies a method for determining the resistance to solvent solutions of the colour and finish of unused, and not yet cleaned,
in stock
Price: 72,- USD
CSN EN ISO 4047 - Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977) 
CSN EN ISO 4047
 
792012
Released:  1998
CSN EN ISO 4047 - Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977)
EN ISO 4047This description is for standard: EN ISO 4047
in stock
Price: 65,- USD
CSN CEN/TS 14906 - Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive 
CSN CEN/TS 14906
 
792015
Released:  2004
CSN CEN/TS 14906 - Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive
CEN/TS 14906This description is for standard: CEN/TS 14906This document gives guidelines for the test methods and recommended values for upholstery leather for automotive. This document also specifies
in stock
Price: 72,- USD
CSN EN ISO 14931 - Leather - Guide to the selection of leather for apparel (excluding furs) 
CSN EN ISO 14931
 
792310
Released:  2004
CSN EN ISO 14931 - Leather - Guide to the selection of leather for apparel (excluding furs)
EN ISO 14931This description is for standard: EN ISO 14931ISO 14931:2004 gives recommended values and related test methods for apparel leather, excluding furs. It also specifies the sampling and condi
in stock
Price: 65,- USD
CSN EN 13336 - Leather - Upholstery leather characteristics - Guide for selection of leather for furniture 
CSN EN 13336
 
792820
Released:  2004
CSN EN 13336 - Leather - Upholstery leather characteristics - Guide for selection of leather for furniture
EN 13336This description is for standard: EN 13336This document gives guidelines for the test methods and recommended values for upholstery leather for furniture. This document also specifies the samp
in stock
Price: 72,- USD
CSN EN ISO 2418 - Leather - Chemical, physical and mechanical and fastness tests - Sampling location 
CSN EN ISO 2418
 
793801
Released:  2002
CSN EN ISO 2418 - Leather - Chemical, physical and mechanical and fastness tests - Sampling location
EN ISO 2418This description is for standard: EN ISO 2418
in stock
Price: 72,- USD
CSN EN ISO 2419 - Leather - Physical and mechanical tests - Sample preparation and conditioning 
CSN EN ISO 2419
 
793802
Released:  2006
CSN EN ISO 2419 - Leather - Physical and mechanical tests - Sample preparation and conditioning
EN ISO 2419This description is for standard: EN ISO 2419ISO 2419:2006 specifies the preparation of leather test pieces for physical and mechanical testing together with two standard atmospheres for co
in stock
Price: 72,- USD
CSN EN ISO 2420 - Leather - Physical and mechanical tests - Determination of apparent density 
CSN EN ISO 2420
 
793806
Released:  2002
CSN EN ISO 2420 - Leather - Physical and mechanical tests - Determination of apparent density
EN ISO 2420This description is for standard: EN ISO 2420
in stock
Price: 72,- USD
CSN EN ISO 5404 - Leather - Physical test methods - Determination of water resistance of heavy leathers 
CSN EN ISO 5404
 
793807
Released:  2011
CSN EN ISO 5404 - Leather - Physical test methods - Determination of water resistance of heavy leathers
EN ISO 5404This description is for standard: EN ISO 5404ISO 5404:2011 specifies a method for determining the water resistance of heavy leathers. The method allows determination of the penetration time
in stock
Price: 72,- USD
CSN EN ISO 17227 - Leather - Physical and mechanical tests - Determination of dry heat resistance of leather 
CSN EN ISO 17227
 
793808
Released:  2002
CSN EN ISO 17227 - Leather - Physical and mechanical tests - Determination of dry heat resistance of leather
EN ISO 17227This description is for standard: EN ISO 17227
in stock
Price: 72,- USD
CSN EN ISO 2417 - Leather - Physical and mechanical tests - Determination of the static absorption of water 
CSN EN ISO 2417
 
793812
Released:  2002
CSN EN ISO 2417 - Leather - Physical and mechanical tests - Determination of the static absorption of water
EN ISO 2417This description is for standard: EN ISO 2417
in stock
Price: 72,- USD
CSN EN ISO 5403-1 - Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) 
CSN EN ISO 5403-1
 
793813
Released:  2011
CSN EN ISO 5403-1 - Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer)
EN ISO 5403-1This description is for standard: EN ISO 5403-1ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is ap
in stock
Price: 72,- USD
CSN EN ISO 5403-2 - Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) 
CSN EN ISO 5403-2
 
793813
Released:  2011
CSN EN ISO 5403-2 - Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser)
EN ISO 5403-2This description is for standard: EN ISO 5403-2ISO 5403-2:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated angular compression. It is a
in stock
Price: 72,- USD
CSN EN ISO 17232 - Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006) 
CSN EN ISO 17232
 
793814
Released:  2009
CSN EN ISO 17232 - Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006)
EN ISO 17232This description is for standard: EN ISO 17232ISO 17232:2006 specifies two methods for determining the heat resistance of patent leather. Method A makes use of a modified lastometer wh
in stock
Price: 72,- USD
CSN EN ISO 17186 - Leather - Physical and mechanical tests - Determination of surface coating thickness 
CSN EN ISO 17186
 
793815
Released:  2011
CSN EN ISO 17186 - Leather - Physical and mechanical tests - Determination of surface coating thickness
EN ISO 17186This description is for standard: EN ISO 17186ISO 17186:2011 specifies a method for determining the thickness of the surface coating applied to leather when measured under zero compression
in stock
Price: 72,- USD
CSN EN ISO 17235 - Leather - Physical and mechanical tests - Determination of softness 
CSN EN ISO 17235
 
793816
Released:  2011
CSN EN ISO 17235 - Leather - Physical and mechanical tests - Determination of softness
EN ISO 17235This description is for standard: EN ISO 17235ISO 17235:2011 specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers, e.g.
in stock
Price: 72,- USD
CSN EN ISO 14268 - Leather - Physical and mechanical tests - Determination of water vapour permeability 
CSN EN ISO 14268
 
793817
Released:  2002
CSN EN ISO 14268 - Leather - Physical and mechanical tests - Determination of water vapour permeability
EN ISO 14268This description is for standard: EN ISO 14268
in stock
Price: 72,- USD
CSN EN ISO 17236 - Leather - Physical and mechanical tests - Determination of extension set 
CSN EN ISO 17236
 
793818
Released:  2002
CSN EN ISO 17236 - Leather - Physical and mechanical tests - Determination of extension set
EN ISO 17236This description is for standard: EN ISO 17236
in stock
Price: 72,- USD
CSN EN ISO 17229 - Leather - Physical and mechanical tests - Determination of water vapour absorption 
CSN EN ISO 17229
 
793819
Released:  2002
CSN EN ISO 17229 - Leather - Physical and mechanical tests - Determination of water vapour absorption
EN ISO 17229This description is for standard: EN ISO 17229
in stock
Price: 72,- USD
CSN EN ISO 3376 - Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension 
CSN EN ISO 3376
 
793820
Released:  2011
CSN EN ISO 3376 - Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
EN ISO 3376This description is for standard: EN ISO 3376ISO 3376:2011 specifies a method for determining the tensile strength, elongation at a specified load and elongation at break of leather. It is
in stock
Price: 72,- USD
CSN EN ISO 3378 - Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index 
CSN EN ISO 3378
 
793821
Released:  2002
CSN EN ISO 3378 - Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index
EN ISO 3378This description is for standard: EN ISO 3378
in stock
Price: 72,- USD
CSN EN ISO 17233 - Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings 
CSN EN ISO 17233
 
793822
Released:  2002
CSN EN ISO 17233 - Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
EN ISO 17233This description is for standard: EN ISO 17233
in stock
Price: 72,- USD
CSN EN ISO 23910 - Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007) 
CSN EN ISO 23910
 
793823
Released:  2007
CSN EN ISO 23910 - Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007)
EN ISO 23910This description is for standard: EN ISO 23910ISO 23910:2007 specifies a method for determining the stitch tear resistance of leather. It can be used on all leathers, but is particularly s
in stock
Price: 72,- USD
CSN EN ISO 26082 - Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather (ISO 26082:2007) 
CSN EN ISO 26082
 
793824
Released:  2007
CSN EN ISO 26082 - Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather (ISO 26082:2007)
EN ISO 26082This description is for standard: EN ISO 26082ISO 26082:2007 specifies, for pigmented leathers, a method for the determination of the change in colour of the leather after rubbing with a s
in stock
Price: 107,- USD
CSN EN ISO 14087 - Leather - Physical and mechanical tests - Determination of bending force 
CSN EN ISO 14087
 
793825
Released:  2011
CSN EN ISO 14087 - Leather - Physical and mechanical tests - Determination of bending force
EN ISO 14087This description is for standard: EN ISO 14087ISO 14087:2011 describes a test method for the determination of the bending force of leather.
in stock
Price: 72,- USD
CSN EN ISO 3377-2 - Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear 
CSN EN ISO 3377-2
 
793828
Released:  2002
CSN EN ISO 3377-2 - Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear
EN ISO 3377-2This description is for standard: EN ISO 3377-2
in stock
Price: 72,- USD
01 GENERAL CLASS02 MACHINE PARTS03 MACHINE PARTS CORROSION AND MATERIAL PROTECTION04 FOUNDRY ENGINEERING05 WELDING, SOLDERING, CUTTING OF METALS AND PLASTICS06 HEATING, INDUSTRIAL FURNACES, COOKERS AND HEATERS07 BOILERS08 TURBINES09 RECIPROCATING INTERNAL-COMBUSTION ENGINES10 COMPRESSORS, VACUUM AND PNEUMATIC INSTALLATIONS11 PUMPS, HYDRAULIC INSTALLATIONS12 VENTILATION ENGINEERING13 PIPE-FITTINGS AND PIPES14 REFRIGERATION15 PRODUCTS FROM METAL SHEET AND WIRE16 PRODUCTS FROM METAL AND WIRE17 FINE MECHANICS18 AUTOMATION FOR INDUSTRY19 OPTICAL INSTRUMENTS, DEVICES FOR CINEMATOGRAPHY AND REPROGRAPHY20 MACHINE TOOLS FOR METALS21 FORMING MACHINES22 TOOLS23 HAND TOOLS24 CLAMPING TOOLS25 MEASURING IMSTRUMENTS26 TRANSPORTATION AND MATERIAL HANDLING EQUIPMENT27 LIFTING EQUIPMENT, MACHINES FOR SURFACE MINING, MACHINES AND EQUIPMENT FOR EARTH-MOVING, CONSTRUCTION AND ROAD WORKS28 RAIL VEHICLES29 RAIL VEHICLES30 ROAD VEHICLES31 AERONAUTICS AND COSMONAUTICS32 SHIPS AND FLOATING INSTALLATIONS33 ELECTRICAL ENGINEERING ELECTROTECHNICAL REGULATIONS34 ELECTRICAL ENGINEERING35 ELECTRICAL ENGINEERING36 ELECTRICAL ENGINEERING37 ELECTRICAL POWER ENGINEERING38 POWER ENGINEERING FIRE SAFETY39 ARMS FOR CIVIL USE40 NUCLEAR ENGINEERING41 METALLURGY STEEL MATERIAL SPECIFICATION42 METALURGY43 METALLURGY MACHINERY44 MINING45 DEEP HOLE DRILLING AND OIL EXTRACTION46 AGRICULTURE47 AGRICULTURAL AND FORESTRY MACHINERY48 FORESTRY49 WOODWORKING INDUSTRY50 PAPER INDUSTRY PRODUCTS51 MACHINERY FOR FOOD INDUSTRY52 MACHINERY FOR FOOD INDUSTRY53 MACHINERY FOR FOOD INDUSTRY56 FOOD INDUSTRY PRODUCTS57 FOOD INDUSTRY PRODUCTS58 FOOD INDUSTRY PRODUCTS62 RUBBER INDUSTRY, RUBBER63 RUBBER INDUSTRY, RUBBER ARTICLES64 PLASTICS65 CHEMICAL INDUSTRY PRODUCTS66 CHEMICAL INDUSTRY PRODUCTS67 CHEMICAL INDUSTRY PRODUCTS68 CHEMICAL INDUSTRY PRODUCTS69 MACHINERY FOR CHEMICAL INDUSTRY70 PRODUCTS OF GLASS AND FUSED MINERALS71 GLASS AND FUSED MINERALS MATERIALS SPECIFICATIONS AND MANUFACTURING EQUIPMENT72 BUILDING RAW MATERIALS, MATERIALS AND PRODUCTS73 BUILDING DESIGN AND CONSTRUCTION74 PARTS OF BUILDINGS75 WATER MANAGEMENT76 Services77 PACKAGING AND PACKAGE ENGINEERING79 LEATHER INDUSTRY80 TEXTILE MATERIALS AND PRODUCTS81 MACHINERY FOR TEXTILE INDUSTRY82 MACHINES AND EQUIPMENT FOR SURFACE TREATMENT83 ENVIRONMENT PROTECTION, WORKING AND PERSONAL PROTECTION, SAFETY OF MACHINE EQUIPMENT AND ERGONOMICS84 HEALTH SERVICE85 HEALTH SERVICE86 HEALTH SERVICE88 PRINTING INDUSTRY89 MUSICAL INSTRUMENTS90 OFFICE, SCHOOL AND DRAWING SUPPLIES91 INTERIOR FURNISHING93 OUTFITTING ARTICLES94 OUTFITTING ARTICLES95 OUTFITTING ARTICLES96 OUTFITTING ARTICLES97 Data exchange98 99 METROLOGY
Name:
Password:
 +420 377 387 684
My status
Copyright © 2000-2008Technické normy.cz
 sitemap
design by  Vortex Vision