PRICES include / exclude VAT
Sponsored link
FREE SHIPPINGReleased: 2017
CSN EN ISO 10619-1
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
Format
Availability
Price and currency
English Hardcopy
In stock
61.11 USD
Category: | 635216 |
Released: | 2017 |
Number of Standard: | CSN EN ISO 10619-1 |
DESCRIPTION
EN ISO 10619-1
EN ISO 10619-1 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature - ISO 10619-1:2017 specifies three methods for measuring the flexibility of rubber and plastics hoses and tubing (methods A1, B and C1), where the deformation of the hose or tubing is measured, and two methods for measuring the stiffness (methods A2 and C2) by measuring the force required to bend rubber or plastics hoses or tubing to a specific radius at ambient temperature. Methods A1 and A2 are suitable for rubber and plastics hoses and tubing with inside diameter of up to and including 80 mm. Method A1 allows the measurement of the flexibility of the hose or tubing by measuring the reduction in outside diameter when the hose is compressed between two plates. Method A2 provides a means of measuring the force required to reach a specific bend radius when the hose or tubing is compressed, as between two plates. The test can be carried out at a specified internal pressure. Method B is suitable for rubber and plastics hoses and tubing with inside diameter of up to and including 100 mm, and provides a means of assessing the behaviour of the hose and tubing when bent around a mandrel. The final mandrel diameter used can be taken as the minimum bend radius of the hose or tubing. As this value is determined by the reduction of the outside diameter, it can be used as a measure of the flexibility of the hose or tubing. The hose or tubing being tested can be unpressurized, pressurized or under vacuum and, if required, with the curvature or against the curvature of the hose or tubing, if such curvature is present. Methods C1 and C2 are suitable for rubber and plastics hoses and tubing with inside diameter of 100 mm and greater. Method C1 provides a means of determining the flexibility of the hose and tubing at the minimum bend radius. Method C2 provides a method of measuring the stiffness of the hose and tubing at the minimum bend radius.
Original English text of CSN EN Standard.
The price of the Standard included all amendments and correcturs.
Related products
English Hardcopy
In stock
51.11 USD
English Hardcopy
In stock
61.11 USD
CSN EN ISO 8029
Plastics hose - General-purpose collapsible water hose, textilereinforced - Specification
Plastics hose - General-purpose collapsible water hose, textilereinforced - Specification
Released: 2014
English Hardcopy
In stock
70.00 USD
CSN EN ISO 8308
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
Released: 2015
English Hardcopy
In stock
51.11 USD
CSN EN ISO 7751
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
Released: 2016
English Hardcopy
In stock
51.11 USD
CSN EN ISO 10960
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions
Released: 2017
English Hardcopy
In stock
51.11 USD
CSN EN ISO 6802
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing
Released: 2018
English Hardcopy
In stock
51.11 USD
CSN EN ISO 8031
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
Released: 2020
English Hardcopy
In stock
70.00 USD
CSN EN ISO 7233
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
Released: 2021
English Hardcopy
In stock
51.11 USD
English Hardcopy
In stock
61.11 USD