Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets

BS EN 16072. Intelligent transport systems. ESafety. Pan-European eCall operating requirements

Medical electrical equipment Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment

Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

BS EN 61094-2 AMD1. Electroacoustics. Measurement microphones Part 2. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

BS EN 17615. Plastics. Environmental Aspects. Vocabulary

BS IEC 63206. Industrial-process control systems. Recorders

Railway applications. Electromagnetic compatibility Rolling stock. Apparatus

Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus

Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire Multicore cables

Reference conditions and procedures for testing industrial and process measurement transmitters Specific procedures for pressure transmitters

BS EN IEC 62453-71. Field device tool (FDT) interface specification Part 71. OPC UA Information Model for FDT

BS EN IEC 60079-11. Explosive atmospheres Part 11. Equipment protection by intrinsic safety "i"

Lamp controlgear Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)

BS EN IEC 60544-5. Electrical insulating materials. Determination of the effects of ionizing radiation Part 5. Procedures for assessment of ageing in service

Optics and photonics. Medical endoscopes and endotherapy devices Determination of optical resolution of rigid endoscopes with optics

Specification for head protectors for cricketers

Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structure

Information technology. Data centre facilities and infrastructures Power Usage Effectiveness

Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces

Intelligent transport systems. Automatic vehicle and equipment identification. Numbering and data structures

Tests on electric and optical fibre cables under fire conditions Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus

BS ISO 37180. Smart community infrastructures. Guidance on smart transportation with QR code identification and authentification in transportation and its related or additional services

Connectors for electronic equipment. Product requirements Generic specification

BS EN IEC 61820-2. Electrical installations for aeronautical ground lighting at aerodromes Part 2. Requirements for series circuits

BS EN 60730-1. Automatic electrical controls Part 1. General requirements

BS EN IEC 62386-103. Digital addressable lighting interface Part 103. General requirements. Control devices

Household and similar electrical appliances. Safety Particular requirements for blankets, pads, clothing and similar flexible heating appliances

Chemical disinfectants and antiseptics, Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2, step 2)

Electric cables. Charging cables for electric vehicles

BS EN 61676. Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology

Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications

Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria

BS EN IEC 60335-2-2 AMD11. Household and similar electrical appliances. Safety Part 2-2. Particular requirements for vacuum cleaners and water-suction cleaning appliances

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for refrigerators, frozen-food storage cabinets and food freezers

BS EN 10250-3. Open die steel forgings for general engineering purposes Part 3. Alloy special steels

BS EN 10250-2. Open die steel forgings for general engineering purposes Part 2. Non-alloy quality and special steels

Hydraulic fluid power. Calibration of automatic particle counters for liquids

BS EN 17624. Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air

BS EN IEC 61543. Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility

Elastomeric parts for parenterals and for devices for pharmaceutical use Determination of released-particle count

Safety devices for protection against excessive pressure Safety valves

BS EN IEC 60331-4. Tests for electric cables under fire conditions. Circuit integrity Part 4. Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage higher than 1kV up to and including 30 kV

BS EN 17616. Outdoor candles. Specification for fire safety

BS EN 17617. Outdoor candles. Product safety labels

BS EN ISO 2080. Metallic and other inorganic coatings. Surface treatment, metallic and other inorganic coatings. Vocabulary

BS IEC 61869-202. Instrument transformers Part 202. Additional requirements for Current Transformers for Low Voltage applications

Household and similar electrical appliances. Safety Particular requirements for milking machines

BS EN 61869-201. Instrument transformers Part 201. General requirements for Instrument Transformers for low voltage applications

BS EN 10250-1. Open die steel forgings for general engineering purposes Part 1. General requirements

Safety of machinery. Laser processing machines Laser safety requirements

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays Common symbols

BS EN 62386-302 AMD1. Digital addressable lighting interface Part 302. Particular requirements. Input devices. Absolute input devices

BS EN 62386-102. Digital addressable lighting interface Part 102. General requirements. Control gear

BS EN 1434-4. Thermal energy meters Part 4. Pattern approval tests

BS EN 1434-2. Thermal energy meters Part 2. Constructional requirements

Tracked Changes. Electromagnetic compatibility (EMC) Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

BS EN ISO 16090-1. Machine tools safety. Machining centres, milling machines, transfer machines Part 1. Safety requirements

BS EN IEC 62341-6-1. Organic light emitting diode (OLED) displays Part 6-1. Measuring methods of optical and electro-optical parameters

BS EN 62496-4-3. Optical circuit boards Part 4-3. Interface standards. Terminated waveguide OCB assembly using a single-row thirty-two-channel PMT connector intermateable with 250 μm pitch MPO 16

BS EN ISO 20519. Ships and marine technology. Specification for bunkering of liquefied natural gas fuelled vessels

Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors Cooling seasonal performance factor

BS EN 17609. Building automation and control systems. Control applications

BS EN IEC 61535. Installation couplers intended for permanent connection in fixed installations

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays Symbols for agricultural tractors and machinery

BS EN IEC 62386-101. Digital addressable lighting interface Part 101. General requirements. System components

Acoustics. Recommended practice for the design of lownoise workplaces containing machinery Noise control measures

Tracked Changes. Fences Specification for strained wire and wire mesh netting fences

Conduit systems for cable management General requirements

Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1)

Electromagnetic compatibility (EMC) Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

BS EN IEC 62443-2-4. Security for industrial automation and control systems Part 2-4. Security program requirements for IACS service providers

BS ISO 19264-1. Photography. Archiving systems. Imaging systems quality analysis Part 1. Reflective originals

BS EN IEC 60404-17. Magnetic materials Part 17. Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor

Foundry machinery. Vocabulary Molding and coremaking machines and other equipment related to non-permanent mold casting process

Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections Ceramic enclosures

Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols

Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz)

BS ISO 20421-1 AMD1. Cryogenic vessels. Large transportable vacuum-insulated vessels Part 1. Design, fabrication, inspection and testing

BS EN ISO 80601-2-74. Medical electrical equipment Part 2-74. Particular requirements for basic safety and essential performance of respiratory humidifying equipment

BS EN 1854. Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Pressure sensing devices for gas burners and gas burning appliances

BS EN 50365. Live Working. Electrically insulating helmets for use on low and medium voltage installations

Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO 12813 Test suite structure and test purposes

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

Acoustics. Determination and application of measurement uncertainties in building acoustics Sound insulation

BS EN IEC 60335-2-84 AMD AA. Household and similar electrical appliances. Safety Part 2-84. Particular requirements for toilet appliances

BS IEC 63278-1. Asset administration shell for industrial applications Part 1. Administration shell structure

Tracked Changes. Measurement of fluid flow by means of pressure-differential devices. Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167

Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum

BS IEC 62386-304 AMD1. Digital addressable lighting interface Part 304. Particular requirements. Input devices. Light sensor

BS IEC 62386-303 AMD1. Digital addressable lighting interface Part 303. Particular requirements. Input devices. Occupancy sensor

Electric motor-operated tools. Dust measurement Procedure General requirements

Environmental management. Life cycle assessment. Principles and framework

Loose-laid panels. Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer

Thermal energy meters Initial verification tests

Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection

Energy management system application program interface (EMS-API) Diagram layout profile

Household and similar electrical appliances. Safety Particular requirements for commercial electric hoods

Medical suction equipment Electrically powered suction equipment

BS EN 1434-1. Thermal energy meters Part 1. General requirements

Background paper to the National Annexes to BS EN 1992-1, BS EN 1992-3 and BS EN 1992-4

Connectors for electronic equipment Detail specification for 8-way, unshielded, free and fixed connectors

Earth-moving machinery. Loaders and backhoe loaders Calculation of rated operating capacity and test method for verifying calculated tipping load

Sound system equipment Headphones and earphones

BS EN IEC 61869-210. Instrument transformers Part 210. Additional requirements for low power current transformers and current sensors for application within Low Voltage systems

Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions. Method by measurement of pressure increase

BS EN 933-5. Tests for geometrical properties of aggregates Part 5. Determination of percentage of crushed particles in coarse and all-in natural aggregates

BS EN 16603-50. Space engineering. Communications

BS EN IEC 62208. Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements

BS ISO 9584. Implants for surgery. Non-destructive testing. Radiographic examination of cast metallic surgical implants

BS EN 12444. Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation

Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies

BS ISO 16653-2. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features Part 2. MEWPs with non-conductive (insulating) components

BS EN ISO 10101-3. Natural gas. Determination of water by the Karl Fischer method Part 3. Coulometric procedure

BS EN ISO 10101-2. Natural gas. Determination of water by the Karl Fischer method Part 2. Volumetric procedure

BS ISO 20468-8. Guidelines for performance evaluation of treatment technologies for water reuse systems Part 8. Evaluation of treatment systems based on Life Cycle Cost

Alarm systems. Alarm transmission systems and equipment Requirements for common protocol for alarm transmission using the Internet Protocol (IP)

Thunderstorm warning systems. Protection against lightning

Dentistry. Vocabulary

Tracked Changes. Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces

Structural use of aluminium Recommendations for the design of aluminium structures to BS EN 1999

Low-voltage electrical installations Prosumer's low-voltage electrical installations

Tracked Changes. IT Security techniques. Entity authentication Mechanisms using authenticated encryption

Thermal-links. Requirements and application guide

Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls

Electric dishwashers for household use. Methods for measuring the performance

BS EN ISO 19111 AMD1. Geographic information. Referencing by coordinates

Residual current operated circuit-breakers for household and similar use Particular requirements for devices with screwless-type terminals for external copper conductors

Timber structures. Strength graded structural timber with rectangular cross section General requirements

Implants for surgery. Wear of total hip-joint prostheses Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test

Pneumatic fluid power. Assessment of component reliability by testing Directional control valves

Aerospace series. Specification for Bolts, Hexagonal heads (Unified threads) in aluminium alloy, anodized

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Performance requirements for Type 1 (gas-tight) chemical protective suits

BS EN 1434-5. Thermal energy meters Part 5. Initial verification tests

BS EN 1434-6. Thermal energy meters Part 6. Installation, commissioning, operational monitoring and maintenance

Glass in building. Thermally toughened soda lime silicate safety glass Definition and description

BS EN 12489. Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method

Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface-finishing machines

BS EN 17610. Building hardware. Environmental product declarations. Product category rules complementary to EN 15804 for building hardware

BS EN ISO 25178-700. Geometrical product specifications (GPS). Surface texture: Areal Part 700. Calibration, adjustment and verification of areal topography measuring instruments

BS ISO 4382-1. Plain bearings. Copper alloys Part 1. Cast copper alloys for solid and multilayer thick-walled plain bearings

BS ISO 21013-1. Cryogenic vessels. Pressure-relief accessories for cryogenic service Part 1. Reclosable pressure-relief valves

EMC IC modelling Models of integrated circuits for Pulse immunity behavioural simulation. Conducted Pulse Immunity (ICIM-CPI)

BS EN 14067-5. Railway applications. Aerodynamics Part 5. Requirements and assessment procedures for aerodynamics in tunnels

Electroacoustics. Audiometric equipment Test signals of short duration

Gaseous hydrogen. Cylinders and tubes for stationary storage

BS EN 1097-7. Tests for mechanical and physical properties of aggregates Part 7. Determination of the particle density of filler. Pyknometer method

BS EN ISO 10101-1. Natural gas. Determination of water by the Karl Fischer method Part 1. Introduction

Household and similar electrical appliances. Safety Particular requirements for clothes dryers and towel rails

BS EN IEC 60794-1-404. Optical fibre cables Part 1-404. Generic specification. Basic optical cable test procedures. Electrical test methods. Current—temperature test, Method H4

BS EN IEC 60794-1-220. Optical fibre cables Part 1-220. Generic specification. Basic optical cable test procedures. Environmental test methods. Salt spray Corrosion test, Method F20

BS EN IEC 61754-37. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Part 37. Type MDC connector family

Railway applications. Polymeric composite sleepers, bearers and transoms Product testing

BS IEC 61754-36. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Part 36. Type SAC connector family

BS IEC 60050-831. International Electrotechnical Vocabulary (IEV) Part 831. Smart city systems

Glass in building. Safety in case of fire, fire resistance. Glass testing methodology for the purpose of classification

BS EN 17619. Classification of wood adhesives for non-structural timber products for exterior use

Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25

Stationary training equipment-COPY Elliptical trainers, additional specific safety requirements and test methods-COPY

Electromagnetic compatibility (EMC) Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

Information container for linked document delivery. Exchange specification Link types

Document management. Electronic document file format for long-term preservation Use of ISO 32000-2 (PDF/A-4)

Dentistry. Polymer-based crown and veneering materials

Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen-conserving equipment

Nuclear power plants. Instrumentation and control systems important to safety. Design and qualification of isolation devices

Tracked Changes. Surfaces for sports areas. Synthetic surfaces for outdoor sports areas. Test method for artificial weathering

Mining. Classification of mine accidents

Harvesting equipment. Blades for agricultural rotary mowers. Requirements

Innovation Management Assessment. Guidance

Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system

BS IEC 63253-5713-8. Station Service Voltage Transformers (SSVT)

BS EN ISO 8996. Ergonomics of the thermal environment. Determination of metabolic rate

BS ISO 3716. Hydrometry. Functional requirements and characteristics of suspended-sediment samplers

BS ISO 14620-3. Space systems. Safety requirements Part 3. Flight safety systems

BS EN 13241. Industrial, commercial, garage doors and gates. Product standard, performance characteristics

BS ISO 17447-1. Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Part 1. Basic characteristics and dimensions for metal-sheath-type glow-plugs

BS ISO 21869. Rubber compounding ingredients. Magnesium oxide. Methods of test

BS ISO 20515. Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values

BS ISO/IEC 24773-3. Software and systems engineering. Certification of software and systems engineering professionals Part 3. Systems Engineering

BS ISO 7299-2. Diesel engines. End-mounting flanges for pumps Part 2. High-pressure supply pumps for common rail fuel injection systems

Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance

Rubber. Vocabulary

BS EN ISO 16089 AMD1. Machine tools. Safety. Stationary grinding machines

Measurement of internal electric field in insulating materials. Pressure wave propagation method

BS ISO 24124. Space data and information transfer systems. Voice and audio communications

BS ISO 14533-2. Processes, data elements and documents in commerce, industry and administration. Long term signature Part 2. Profiles for XML Advanced Electronic Signatures (XAdES)

Guidance on social responsibility

Industrial valves. Globe valves of thermoplastics materials

Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications

Maize (<i>Zea mays</i> L.). Specification

BS ISO 22941. Rubber sheets for livestock. Dairy cattle. Specification

Earth-moving machinery. Hydraulic breakers. Terminology and commercial specifications

Postal services. Packaging for boxable items. Characteristics for packaging of small and light weight items to be delivered into the consumer's letterbox

Communication networks and systems for power utility automation Using IEC 61850 for condition monitoring diagnosis and analysis

Road marking materials. Road trials

Aerospace series. Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank. Dimensions and loads, Inch series

Medical electrical equipment Particular requirements for the basic safety and essential performance of oxygen concentrator equipment

Office furniture. Work tables Safety, strength and durability requirements

Textiles. Determination of fabric propensity to surface pilling, fuzzing or matting Modified Martindale method

Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles

Textiles. Determination of fabric propensity to surface pilling, fuzzing or matting Pilling box method

Geosynthetics. Guidelines for the assessment of durability

Geotextiles and geotextile-related products. Determination of water flow capacity in their plane Index test

Geosynthetics. Method for determining the microbiological resistance by a soil burial test

BS EN ISO 29461-1. Air intake filter systems for rotary machinery. Test methods Part 1. Static filter elements

BS ISO 14200. Space environment (natural and artificial). Process-based implementation of meteoroid and debris environment models (orbital altitudes below GEO + 2 000 km)

BS ISO 8466-1. Water quality. Calibration and evaluation of analytical methods Part 1. Linear calibration function

BS EN 61169-21. Radio-frequency connectors Part 21. Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (Types SC-A and SC-B)

BS EN 12427. Industrial, commercial and garage doors and gates. Air permeability. Test method

BS ISO 4727. Essential oil of palmarosa [Cymbopogon martini (Roxb.) W. Watson var. motia]

Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

BS ISO 23739. Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of zirconium oxide powders

Sound system equipment Objective rating of speech intelligibility by speech transmission index

BS ISO 24126 Space data and information transfer systems. Delta-DOR quasar catalog update procedure

BS 8632. Natural Capital Accounting for Organizations. Specification

BS ISO 24125. Space data and information transfer systems. Mission operations. Message abstraction layer binding to TCP/IP transport and split binary encoding

BS ISO 24129. Space data and information transfer systems. Network layer security adaptation profile

Automation systems and integration. Industrial data. Visualization elements of digital twins

BS ISO 22685. Space data and information transfer systems. Mission operations. Message abstraction layer binding to HTTP transport and XML encoding

Field device integration (FDI) Profiles. Generic protocols

Information technology. Smart City ICT reference framework Smart city knowledge management framework

Requirements for electronic advanced data (EAD) in postal operations, in particular compliant to security and customs requirements

BS ISO 24121. Space data and information transfer systems. Spectral preprocessing transform for multispectral and hyperspectral image compression

BS ISO 24122. Space data and information transfer systems. Spacecraft onboard interface services. RFID tag encoding specification

BS IEC 62629-62-11. 3D Display Devices Part 62-11. Measurement methods for transparent virtual-image type. Optical

Internet of things (IOT). Wireless sensor network system supporting electrical power substation

BS ISO 24123. Space data and information transfer systems. Mission operations monitor & control services

BS EN 60127-8 AMD1. Miniature fuses Part 8. Fuse resistors with particular overcurrent protection

BS EN IEC 62899-202-9. Materials. Guidelines for printed patterns for mechanical test

Field device integration (FDI) Profiles. Modbus-RTU

Mechanical products. Methodology for reduction of environmental impacts in product design and development

Resilient, textile and laminate floor coverings. Classification

Power transformers Determination of sound levels. Application guide

Personal protective equipment. Footwear protecting against risks in foundries and welding Requirements and test methods for protection against risks in foundries

Personal protective equipment. Footwear protecting against risks in foundries and welding Requirements and test methods for protection against risks in welding and allied processes

Geotextiles and geotextile-related products. Determination of water flow capacity in their plane Performance test

Swimming pool equipment General safety requirements and test methods for equipment installed in pools for public use

Surface cleaning appliances General requirements on test material and test equipment

Textile fibres. Determination of breaking force and elongation at break of individual fibres

Methods of testing vulcanized rubber

Residual current operated circuit-breakers for household and similar use Particular requirements for devices with flat quick-connect terminations

Specifications for particular types of winding wires Polyvinyl acetal enamelled rectangular aluminium wire, class 120

Cigarettes. Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime

Blast chillers and freezers cabinets for professional use. Classification, requirements and test conditions

Rough-terrain trucks. Safety requirements and verification Tilting operator's cabs

Active assisted living (AAL) reference architecture and architecture model Reference architecture

Nanomanufacturing. Key control characteristics Graphene-based material. Domain size: substrate oxidation

Active assisted living (AAL) reference architecture and architecture model Architecture model

Requirements to connect, access, participate and further develop open global networks and systems, for postal operators and the wider postal sector players

BS ISO 13765-7. Refractory mortars Part 7. Determination of permanent change in dimensions on heating

BS ISO 20730-3. Road vehicles. Vehicle interface for electronic Periodic Technical Inspection (ePTI) Part 3. Data definitions

BS ISO 12925-3. Lubricants, industrial oils and related products (Class L). Family C (gears) Part 3. Specifications for greases for enclosed and open gear systems

BS ISO 31030. Travel risk management. Guidance for organizations

BS EN 933-6. Tests for geometrical properties of aggregates Part 6. Assessment of surface characteristics. Flow coefficient of aggregates

BS EN 16604-30-01. Space. Space Situational Awareness Monitoring Part 01. Glossary of Near Earth objects and space surveillance and tracking terms

BS EN 16005. Power operated pedestrian doorsets. Safety in use. Requirements and test methods

BS ISO 24126. Refractory products. Determination of compressive strength at elevated temperature

BS ISO 24449. Metallic and other inorganic coatings. Determination of thermal conductivity of thermal barrier coatings at elevated temperature

BS ISO 22753. Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements and definitions

BS ISO 4779. Chain components for lifting purposes. Forged eye hook with point and latch. Grade 4, stainless steel, solution annealed

Nanotechnologies. Vocabulary Graphene and related two-dimensional (2D) materials

Health informatics. Service Architecture (HISA) Computational viewpoint

Health informatics. Service Architecture (HISA) Information viewpoint

Health informatics. Service architecture (HISA) Enterprise viewpoint

Construction and installation of ductile iron pipeline system

Building Information Modelling. Level of Information Need Concepts and principles

Soil quality. Determination of dehydrogenases activity in soils Method using triphenyltetrazolium chloride (TTC)

Hearing protectors. Safety requirements Level-dependent earplugs

Assessment service delivery. Procedures and methods to assess people in work and organizational settings Requirements for the client

Graphic technology. Laboratory preparation of test prints Paste inks

Mobile access and working towers made of prefabricated elements Materials, dimensions, design loads, safety and performance requirements

Assessment service delivery. Procedures and methods to assess people in work and organizational settings Requirements for service providers

Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels

Photovoltaic devices Methods of linear dependence and linearity measurements

Energy and data interfaces of users connected to the smart grid with other smart grid stakeholders. Standardization landscape

Specification for radio disturbance and immunity measuring apparatus and methods CISPR technical reports

BS ISO/IEC 22603-1. Information technology. Digital representation of product information Part 1. General requirements

Railway applications. Track. Track geometry quality Measuring systems. Track recording vehicles

Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Assessment of hardness by a glass slide test

Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines Polyethylene (PE) material

Foodstuffs. Determination of aflatoxins in spices other than paprika by IAC clean-up and HPLC-FLD with post-column derivatization

Hearing protectors. Safety requirements Entertainment audio earmuffs

Installation and maintenance of open-flued, non-domestic gas-fired laundry appliances. Specification

Information security. Key management Group key management

Water quality. Determination of alkylmercury compounds in water. Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction

Petroleum, petrochemical and natural gas industries. Pressure-relieving and depressuring systems

Child care articles Children's harnesses, reins. Safety requirements and test methods

Cookware. Ovenware for use in traditional domestic ovens

Optical fibre cables Indoor-outdoor cables. Family specification for universal indoor-outdoor cables

Water quality. Sampling Guidance on sampling of waste water

Quantities and units Space and time

Textiles. Determination of certain preservatives Determination of triclosan residues method using LC-MS/MS

Semiconductor devices Magnetic and capacitive coupler for basic and reinforced insulation

Small craft. Field of vision from the steering position

Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Covered conductors

Road construction and maintenance equipment. Bituminous binder sprayers and synchronous bituminous binder sprayers-chip spreaders. Terminology and commercial specifications

Child care articles Children's harnesses incorporating backpacks and reins. Safety requirements and test methods

Non-destructive testing. Characterization and verification of ultrasonic test equipment Combined equipment

Metallic materials. Determination of forming-limit curves for sheet and strip Measurement and application of forming-limit diagrams in the press shop

Information technology. Object oriented BioAPI Java implementation

Information technology. Object oriented BioAPI C# implementation

BS EN IEC 62832-3. Industrial-process measurement, control and automation. Digital Factory framework Part 3. Application of Digital Factory for life cycle management of production systems

Graphic technology. Determination of the energy consumption of digital printing devices including transitional and related modes

Energy performance of buildings. Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient. General Principles, Module M1-7

Road marking materials. Paint, thermoplastic and cold plastic materials. Physical properties

Gardening machinery. Powered material-collecting systems. Safety

Soft soldering fluxes. Test methods Determination of ammonia content

Lead-acid starter batteries Dimensions of batteries for heavy vehicles

Photovoltaic devices Classification of solar simulator characteristics

Hearing protectors. Safety requirements Entertainment audio earplugs

Gasoline engines with direct fuel injection (GDI engines). Installation of the injectors to the engine

Hearing protectors. General requirements Earmuffs attached to head protection and/or face protection devices

Road vehicles. Compressed natural gas (CNG) fuel system components Manual cylinder valve

Textiles. Determination of fabric propensity to surface pilling, fuzzing or matting Random tumble pilling method

Hearing protectors. General requirements Earplugs

Connectors for electrical and electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz

Photovoltaic devices Measurement of photovoltaic current-voltage characteristics

Small craft. Principal data

Road vehicles. Compressed natural gas (CNG) fuel system components Manual valve

Small craft. Hull construction and scantlings Determination of loads for multihulls and of their local scantlings using ISO 12215-5

Small craft. Hull construction and scantlings Rig loads and rig attachment in sailing craft

Fire detection and fire alarm devices for dwellings Specification for multi-sensor fire alarms using any combination of smoke, heat and carbon monoxide sensors

Corrosion of metals and alloys. Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water

Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in plain line, switches, crossings and expansion devices

Fertilizers and soil conditioners. Determination of monosilicic acid concentrations in nonliquid fertilizer materials

Fertilizers. Determination of perchlorate in mineral fertilizers by liquid chromatography and tandem mass spectrometry detection (LC-MS/MS)

Determination of total sulfur in fertilizers by high temperature combustion

Information technology. Gesture-based interfaces across devices and methods General guidance on gestures for screen readers

Ships and marine technology. Deck machinery. Multifunctional manipulator

Fine bubble technology. Elimination method for sample characterization Evaluation procedure

Optical fibre cables Indoor-outdoor cables. Family specification for flame retardant outdoor cables

Execution of special geotechnical work. Grouting

Hearing protectors. Safety requirements Level-dependent earmuffs

Social value. Understanding and enhancing. Guide

Biotechnology. Specification on data management and publication in microbial resource cente

Metallic coatings on non-metallic basis materials. Measurement of coating thickness. Micro-resistivity method

Road vehicles. In-vehicle Ethernet Common physical entity requirements

Nuclear energy. Packagings for the transport of uranium hexafluoride (UF₆)

Optical fibre cables Indoor-outdoor cables. Family specification for weatherised indoor cables

Lightning and surge voltage protection for photovoltaic (PV) power supply systems

Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater Method by analysis of evolved carbon dioxide

Soil, treated biowaste, sludge and waste. Digestion with a hydrochloric (HCl), nitric (HNO₃) and tetrafluoroboric (HBF₄) or hydrofluoric (HF) acid mixture for subsequent determination of elements

Specification for a Chromium(VI)-free pre-treatment primer

Test code for machine tools Determination of thermal effects

Footwear. Attachment strength of straps, trims and accessories

Road vehicles. Clock extension peripheral interface (CXPI) Data link and physical layer conformance test plan

Indoor air Determination of odour emissions from building products using test chambers

Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Classification of medical beam delivery systems

Infant formula and adult nutritionals. Simultaneous determination of total vitamins B₁, B₂, B₃ and B₆. Enzymatic digestion and LC-MS/MS

Hearing protectors. Testing Physical test methods

Hearing protectors. Testing Acoustic test methods

Reaction-to-fire tests for sandwich panel building systems Test method for large rooms

Architecture for a distributed real-time access system

Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners

Transportable gas cylinders. Porous materials for acetylene cylinders

Zhaga interface specification Book 1 and Book 10

Footwear. Determination of coefficient of friction for footwear and sole components. Test method

Welding and allied processes. Process specification for laser-arc hybrid welding for metallic materials

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems Lower tether anchorages