PRICES include / exclude VAT
Homepage>BS Standards>11 HEALTH CARE TECHNOLOGY>11.040 Medical equipment>11.040.50 Radiographic equipment>BS EN 60601-2-54:2009+A2:2019 Medical electrical equipment Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Sponsored link
immediate downloadReleased: 2019-09-11
BS EN 60601-2-54:2009+A2:2019 Medical electrical equipment Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

BS EN 60601-2-54:2009+A2:2019

Medical electrical equipment Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

Format
Availability
Price and currency
English Secure PDF
Immediate download
408.20 USD
English Hardcopy
In stock
408.20 USD
Standard number:BS EN 60601-2-54:2009+A2:2019
Pages:88
Released:2019-09-11
ISBN:978 0 580 94320 1
Status:Standard
DESCRIPTION

BS EN 60601-2-54:2009+A2:2019


This standard BS EN 60601-2-54:2009+A2:2019 Medical electrical equipment is classified in these ICS categories:
  • 11.040.50 Radiographic equipment

Clause 1 of the general standard1) applies, except as follows:

201.1.1 Scope

Replacement:

A2_startThis International Standard applies to the basic safety and essential performance of me equipment and me systems intended to be used for projection radiography and indirect radioscopy.A2_end IEC 60601‑2‑43 applies to me equipment and me systems intended to be used for interventional applications and refers to applicable requirements in this particular standard.

A2_startMe equipment and me systems intended to be used for bone or tissue absorption densitometry, computed tomography, mammography or dental or radiotherapy applications are excluded from the scope of this International Standard.A2_end

If a clause or subclause is specifically intended to be applicable to me equipment only, or to me systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to me equipment and to me systems, as relevant.

A2_startText deletedA2_end

201.1.2 Object

Replacement:

The object of this particular standard is to establish particular basic safety and essential performance requirements for me equipment and me systems for radiography and radioscopy.

201.1.3 Collateral standards

Addition:

This particular standard refers to those applicable collateral standards that are listed in Clause 2 of the general standard and Clause 201.2 of this particular standard.

A2_startIEC 60601‑1‑2 and IEC 60601‑1‑3 apply as modified in Clauses 202 and 203 respectively. IEC 60601‑1‑8, IEC 60601‑1‑9, IEC 60601‑1‑10, IEC 60601‑1‑11 and IEC 60601‑1‑12 do not apply. All other published collateral standards in the IEC 60601‑1 series apply as published.A2_end

NOTE Operators of X-ray equipment are used to audible signals as required in this particular standard rather than to the concepts of IEC 60601‑1‑8. Therefore IEC 60601‑1‑8 does not apply.

201.1.4 Particular standards

Replacement:

In the IEC 60601 series, particular standards may modify, replace or delete requirements contained in the general standard and collateral standards as appropriate for the particular me equipment under consideration, and may add other basic safety and essential performance requirements.

A requirement of a particular standard takes priority over the general standard.

For brevity, IEC 60601‑1 is referred to in this particular standard as the general standard. Collateral standards are referred to by their document number.

The numbering of clauses and subclauses of this particular standard corresponds to that of the general standard with the prefix “201” (e.g. 201.1 in this standard addresses the content of Clause 1 of the general standard) or applicable collateral standard with the prefix “20x” where x is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the 60601-1-2 collateral standard, 203.4 in this particular standard addresses the content of Clause 4 of the 60601-1-3 collateral standard, etc.). The changes to the text of the general standard are specified by the use of the following words:

“Replacement” means that the clause or subclause of the general standard or applicable collateral standard is replaced completely by the text of this particular standard.

“Addition” means that the text of this particular standard is additional to the requirements of the general standard or applicable collateral standard.

“Amendment” means that the clause or subclause of the general standard or applicable collateral standard is amended as indicated by the text of this particular standard.

Subclauses, figures or tables which are additional to those of the general standard are numbered starting from 201.101. However due to the fact that definitions in the general standard are numbered 3.1 through 3.139, additional definitions in this standard are numbered beginning from 201.3.201. Additional annexes are lettered AA, BB, etc., and additional items aa), bb), etc.

Subclauses, figures or tables which are additional to those of a collateral standard are numbered starting from 20x, where “x” is the number of the collateral standard, e.g. 202 for IEC 60601‑1‑2, 203 for IEC 60601‑1‑3, etc.

The term “this standard” is used to make reference to the general standard, any applicable collateral standards and this particular standard taken together.

Where there is no corresponding clause or subclause in this particular standard, the clause or subclause of the general standard or applicable collateral standard, although possibly not relevant, applies without modification; where it is intended that any part of the general standard or applicable collateral standard, although possibly relevant, is not to be applied, a statement to that effect is given in this particular standard.