Dear customers, all orders for hardcopy versions will be sent on 6th January 2026, we wish you a Merry Christmas and a Happy New Year

PRICES include / exclude VAT
Not available online - contact us!
immediate downloadReleased: 2009-08-31
BS EN 15544:2009 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning

BS EN 15544:2009

One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning

CURRENCY
180 EUR
Standard number:BS EN 15544:2009
Pages:22
Released:2009-08-31
ISBN:978 0 580 57332 3
Status:Standard
DESCRIPTION

BS EN 15544:2009


This standard BS EN 15544:2009 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning is classified in these ICS categories:
  • 97.100.30 Solid fuel heaters
This standard specifies calculations for the dimensioning of Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) based upon the required nominal heat output of the stove as declared by the producer. The Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) are of individual one-off construction design. The standard can be used for log wood fired Kachelöfen (tile stoves) that burn one fuel load per storage period with a maximum load between 10 kg and 40 kg and a storage period (nominal heating time) between 8 h and 24 h. This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) equipped with fireclay as interior material, with an apparent density between 1,750 kg/m³ and 2,200 kg/m³, a degree of porosity from 18 % up to 33 % by volume and a heat conductivity from 0,65 W/mK up to 0,90 W/mK (temperature range 20 °C to 400 °C). This standard is valid for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) with sidewise combustion air supply of the combustion chamber and an inflow speed from 2 m/s to 4 m/s, whereas the height of the lowest opening is at least 5 cm above the bottom of the combustion chamber. This standard is not valid for combinations with water heat exchangers for central heating or other heat absorbing elements like glass plates greater than 1/6 of the combustion chamber surface, open water tanks, etc. It is also not valid for combinations with heating/fireplace elements according to EN 13229. Furthermore this standard is not valid for mass-produced prefabricated or partly prefabricated slow heat release appliances according to EN 15250. NOTE Although for the purposes of this standard these calculations are applicable only to the requirements of this standard, the same calculations can be used for other purposes, e.g. to verify emission levels and energy efficiency in case of burning log wood or wood briquettes according to the producer’s manual.