PRICES include / exclude VAT
FREE SHIPPINGReleased: 2018
CSN EN 16842-1
Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
|Number of Standard:||CSN EN 16842-1|
EN 16842-1 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements - This part of the EN 16842 series gives the common test requirements for powered industrial truck visibility testing and is intended to be used in conjunction with EN 16842 parts 2 to 17. The EN 16842 series specify requirements and test procedures of all around visibility of self-propelled industrial trucks (herein after referred to as trucks) in accordance with ISO 5053 1 with a sit-on or stand-on operator, without load, and equipped with fork arms or load platform. The truck specific requirements in EN 16842 parts 2 to 17 supplement or modify the corresponding clauses of this part EN 16842-1 and provide the relevant requirements for the specific truck. The visibility test requirements of the applicable part of EN 16842 for each truck type are used to fulfil the visibility requirements of the EN 16307 series. This European Standard does not apply to: - industrial, rough terrain variable reach or rough terrain masted lorry mounted trucks; - trucks with elevating operator position, when the operating position is elevated above 500 mm; - rough terrain variable reach trucks – within the scope of EN 15830; - centre controlled order picking trucks (in accordance with 3.16 of ISO 5053 1:2015); - pallet truck end controlled (in accordance with 3.15 of ISO 5053 1:2015). NOTE 1 The following trucks in normal operation have excellent 360° visibility and therefore will not be part of this series of standards: - ride on pallet truck; - pedestrian controlled pallet truck. NOTE 2 For trucks equipped with attachments (e.g. clamp), see Clause 9 "Information for use".
Original English text of CSN EN Standard.
The price of the Standard included all amendments and correcturs.
CSN EN 16796-1
Energy efficiency of Industrial trucks - Test methods - Part 1: General
CSN EN 16796-2
Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks, towing tractors and burden-carrier trucks
CSN EN 16796-3
Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks
CSN EN 1459-1
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
CSN EN 16842-2
Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
CSN EN 1459-2+A1
Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
CSN EN ISO 24134
Industrial trucks - Additional requirements for automated functions on trucks