This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable hand fed single spindle vertical moulding machines (with or without demountable power feed unit), herein after referred to as machines , designed to cut wood and materials with similar physical characteristics to wood, when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 1 For the definition of stationary and displaceable machine see ISO 19085-1, 3.4 and 3.5. The machines may also be fitted with one or more of the following devices/facilities, whose hazards have been dealt with: a) a facility for the spindle to be vertically adjustable relative to the table; b) a facility to tilt the spindle; c) a facility to fit a manually operated tenoning sliding table; d) a glass bead saw unit; e) an adjustable table insert. This international standard does not apply to: 1) machines equipped with outboard bearings; 2) machines equipped with powered movements of front extension table and/or tenoning sliding table; NOTE 2 Hand-held motor-operated electric tools are dealt with in IEC 60745-1:2009 together with IEC 60745- 2-17:2010. 4) transportable/displaceable machines (machines set up on a bench or provided with extendable legs and intended to operate when stationary) having a rated input of less than or equal to 3700 W. NOTE 3 Transportable motor-operated electric tools are dealt with in IEC 62841-1:2014 and parts of IEC 62841 3-XX. This document is not applicable to machines: intended for use in potentially explosive atmosphere; manufactured before the date of its publication as an international standard.