PRICES include / exclude VAT
Homepage>ASTM Standards>ASTM A0255-20A - Standard Test Methods for Determining Hardenability of Steel
Sponsored link
Released: 2020-11-16

ASTM A0255-20A

Standard Test Methods for Determining Hardenability of Steel

Format
Availability
Price and currency
English PDF Redline
Immediate download
98.44 USD
PDF
Immediate download
83.46 USD
Hardcopy
In stock
83.46 USD
Language:English
Released:2020-11-16
Pages:26
Standards number:ASTM A0255-20A
Standard number:A0255-20A
Released:01.11.2020
Status:Active
Pages:26
Section:01.05
Keywords:end-quench hardenability; hardenability;
DESCRIPTION

1.1 These test methods cover the identification and description of test methods for determining the hardenability of steels. The two test methods include the quantitative end-quench or Jominy Test and a method for calculating the hardenability of steel from the chemical composition based on the original work by M. A. Grossman.

1.2 The selection of the test method to be used for determining the hardenability of a given steel shall be agreed upon between the supplier and user. The Certified Material Test Report shall state the method of hardenability determination.

1.3 The calculation method described in these test methods is applicable only to the range of chemical compositions that follow:

 

Element

Range, %

 

 

 

 

Carbon

0.10–0.70

 

Manganese

0.50–1.65

 

Silicon

0.15–0.60

 

Nickel

1.50 max

 

Chromium

1.35 max

 

Molybdenum

0.55 max

 

Copper

0.35 max

 

Vanadium

0.20 max

1.4 Hardenability is a measure of the depth to which steel will harden when quenched from its austenitizing temperature (Table 1). It is measured quantitatively, usually by noting the extent or depth of hardening of a standard size and shape of test specimen in a standardized quench. In the end-quench test the depth of hardening is the distance along the specimen from the quenched end which correlates to a given hardness level.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.