ASTM C0593-19
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
| Standard number: | ASTM C0593-19 |
| Released: | 01.12.2019 |
| Status: | Active |
| Pages: | 5 |
| Section: | 04.01 |
| Keywords: | compressive strength; fly ash; freeze-thaw resistance; lime; pozzolan; soil stabilization; |
| ASTM number: | ASTM C593 |
| Supersedes: | C0593-06R11 |
This specification covers the qualification of fly ash and other pozzolans for use with lime in plastic, nonplastic mixtures and other mixtures that affect lime pozzolanic reaction required by soil stabilization. Evaluation of pozzolans containing available lime, such as Class C fly ash, is given consideration. Pozzolans covered include artificial pozzolans such as fly ash, and natural pozzolans, such as diatomite and pumicite, in either raw or calcined state. Various procedures are recommended to quantify various aspects of the lime enhanced pozzolanic reaction. The tests shall qualify sources of fly ash and other pozzolans to meet specified job or project criteria as related to soil stabilization. The following shall be peformed on the pozzolan: water-soluble fraction, fineness, and lime-pozzolan strength development. For the nonplastic mixtures, compressive strength development and freeze-thaw resistance tests shall be performed. The materials shall be subjected to vacuum saturation strength testing.
1.1 This specification covers the qualification of fly ash and other pozzolans for use with lime in plastic, nonplastic mixtures and other mixtures that affect lime pozzolanic reaction required by soil stabilization. Evaluation of pozzolans containing available lime, such as Class C fly ash, is given consideration. Pozzolans covered include artificial pozzolans such as fly ash, and natural pozzolans, such as diatomite and pumicite, in either raw or calcined state.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.