PRICES include / exclude VAT
Immediately download!Released: 2014-2016
CEN/TR 13201-1 + DIN EN 13201- 2, 3, 4, 5
EN 13201-1; EN 13201-2; EN 13201-3; EN 13201-4; EN 13201-5
|Number of Standard:||CEN/TR 13201-1 + DIN EN 13201- 2, 3, 4, 5|
Set EN 13201- Road lighting standards
Saving is 39 € compared to buying individual titles EN 13201- !
- CEN TR 13201-1:2014 - Road lighting - Part 1: Guidelines on selection of lighting classes - This Technical Report specifies the lighting classes set out in EN 13201-2 and gives guidelines on the selection of the most appropriate class for a given situation. To do this, it includes a system to define appropriate lighting classes for different outdoor public areas in terms of parameters relevant to guarantee the aims presented in introductions. The decision on whether a road should be lit is defined in the national road lighting policy. This varies by country or municipality. Specific guidelines are usually available at national level for each country. This Technical Report does not give the criteria on which a decision to light an area can be made, nor on how a lighting installation should be used. Further guidance is given in CIE 115:2010 (Paragraph 1.2 and Annex A). The methods presented in Clauses 5, 6 and 7 have to be considered as the starting points of a comprehensive approach for the normal road lighting. In that sense, the models cannot cover all the different road cases; they introduce general parameters and the impact on lighting requirements. Only the real situation and its unique characteristics (geometry of the road, marking, visual environment, difficulty of the navigation task, lack of visibility, risks of glares due to existing elements, local weather, specific users such as high rate of elderly or visually impaired people, etc.) can lead to a final determination of the appropriate lighting class applying risk evaluation techniques. The visual needs of road users under reduced traffic volumes during certain periods of night or under varying weather conditions, and the positive benefits of reduced energy consumption and potential environmental improvements, are some of the considerations which justify the installation of adaptive road lighting. There are a variety of suitable instruments, devices and methods which can be used for the intelligent control of a road lighting installation. The control systems range from very simple to the most sophisticated applications. Annex B is of assistance in choosing the correct lighting level when adaptive lighting is used as it provides a more refined evaluation of the luminance or illuminance levels within the specific lighting class. Whilst the luminance or illuminance levels may be varied to suit reduced traffic volumes, weather conditions or other parameters the quality parameters of the applicable lighting class specified in EN 13201-2 should be maintained at all times. Renewal or refurbishment of obsolete and uneconomic installations is important. It may be possible to obtain more adapted lighting levels with lower energy consumption using new designs and new technology. The upgrading of lighting and control systems will often give good cost-benefit ratios and short amortisation periods. This document does not give guidelines on the selection of lighting classes for toll stations, tunnels or canals and locks.
- DIN EN 13201-2 : 2016 - Road lighting - Part 2: Performance requirements
EN 13201-2 Road lighting - Part 2: Performance requirements - This part of this European Standard defines performance requirements which are specified as lighting classes for road lighting aiming at the visual needs of road users, and it considers environmental aspects of road lighting. NOTE Installed luminous intensity classes for the restriction of disability glare and control of obtrusive light and installed glare index classes for the restriction of discomfort glare are defined in the informative Annex A. Lighting of pedestrian crossings is discussed in the informative Annex B. Disability glare evaluation for conflict areas (C classes) and pedestrian and pedal cyclists (P classes) is discussed in the informative Annex C.
- DIN EN 13201-3 : 2016 - Road lighting - Part 3: Calculation of performance
EN 13201-3 Road lighting - Part 3: Calculation of performance - This European Standard specifies the conventions and mathematical procedures to be adopted in calculating the photometric performance of road lighting installations designed in accordance with the parameters described in EN 13201-2 to ensure that every lighting calculation is based on the same mathematical principles. The design procedure of a lighting installation also requires the knowledge of the parameters involved in the described model, their tolerances and variability. These aspects are not considered in this part of EN 13201 but a procedure to analyse their contribution in the expected results is suggested in EN 13201-4 and it can also be used in the design phase.
- DIN EN 13201-4 : 2016 - Road lighting - Part 4: Methods of measuring lighting performance
EN 13201-4 Road lighting - Part 4: Methods of measuring lighting performance - This European Standard specifies measurement conditions and procedures for measuring the photometric quality parameters of road lighting installations, i.e. the quantities that quantify their performances in accordance with EN 13201-2 lighting classes. Parameters used for quantifying the energy performance of road lighting installations are not considered. A methodology to evaluate the road lighting performances considering tolerances in the design parameters is described in the informative Annex A.
- DIN EN 13201-5 : 2016 - Road lighting - Part 5: Energy performance indicators
EN 13201-5 Road lighting - Part 5: Energy performance indicators - This part of the European Standard defines how to calculate the energy performance indicators for road lighting installations using the calculated power density indicator (PDI) DP and the calculated annual energy consumption indicator (AECI) DE. Power density indicator (DP) demonstrates the energy needed for a road lighting installation, while it is fulfilling the relevant lighting requirements specified in EN 13201-2. The annual energy consumption indicator (DE) determines the power consumption during the year, even if the relevant lighting requirements change during the night or seasons. These indicators may be used to compare the energy performance of different road lighting solutions and technologies for the same road lighting project. The energy performance of road lighting systems with different road geometries or different lighting requirements cannot be compared to each other directly, as the energy performance is influenced by, amongst others, the geometry of the area to be lit, as well as the lighting requirements. The power density indicator (DP) and annual energy consumption indicator (DE) apply for all traffic areas covered by the series of lighting classes M, C and P as defined in EN 13201-2.
DIN EN 13201-2
Road lighting - Part 2: Performance requirements
Straßenbeleuchtung - Teil 2: Gütemerkmale
DIN EN 13201-3
Road lighting - Part 3: Calculation of performance
Straßenbeleuchtung - Teil 3: Berechnung der Gütemerkmale
DIN EN 13201-4
Road lighting - Part 4: Methods of measuring lighting performance
Straßenbeleuchtung - Teil 4: Methoden zur Messung der Gütemerkmale von Straßenbeleuchtungsanlagen
DIN EN 13201-5
Road lighting - Part 5: Energy performance indicators
Straßenbeleuchtung - Teil 5: Energieeffizienzindikatoren