CANCELED STANDARD
PRICES include / exclude VAT
Homepage>ILNAS EN 50121-2 ed. 4 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
Sponsored link
FAST SHIPPINGReleased: 2017
ILNAS EN 50121-2 ed. 4 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

CSN EN 50121-2 ed. 4

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

CURRENCY
86.59 USD
Number of Standard:CSN EN 50121-2 ed. 4
Number of Standard:ILNAS EN 50121-2 ed. 4
Category:333590
Released:2017
DESCRIPTION

EN 50121-2 ed. 4


EN 50121-2 ed. 4 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world - This European Standard is intended to define the electromagnetic environment of the whole railway system including urban mass transit and light rail system. It describes the measurement method to verify the emissions, and gives the cartography values of the fields most frequently encountered. This European Standard specifies the emission limits of the whole railway system to the outside world. The emission parameters refer to the particular measuring points defined in Clause 5. These emissions should be assumed to exist at all points in the vertical planes which are 10 m from the centre lines of the outer electrified railway tracks, or 10 m from the fence of the substations. Also, the zones above and below the railway system may be affected by electromagnetic emissions and particular cases need to be considered individually. These specific provisions need to be used in conjunction with the general provisions in EN 50121-1. For existing railway lines, it is assumed that compliance with the emission requirements of EN 50121-3-1, EN 50121-3-2, EN 50121-4 and EN 50121 5 will ensure the compliance with the emission values given in this part. For newly build railway systems it is best practice to provide compliance to the emission limits given in this part of the standard (as defined in the EMC plan according to EN 50121-1).

The price of the Standard included all amendments and correcturs.