News 5/2020

BS EN 13480-3 AMD4. Metallic industrial piping Part 3. Design and calculation

Luminaires Particular requirements. Luminaires for emergency lighting

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Particular requirements for transportable bench grinders

Information technology. Data centre facilities and infrastructures Cooling Efficiency Ratio

Quality management. Guidance for people engagement

Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets

BS EN ISO 20346. Personal protective equipment. Protective footwear

BS ISO 16549. Textiles. Unevenness of textile strands. Capacitance method

BS EN 508-1. Roofing and cladding products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet Part 1: Steel

BS EN ISO 1833-26. Textiles. Quantitative chemical analysis Part 26. Mixtures of melamine with certain other fibres (method using hot formic acid)

BS EN ISO 1833-3. Textiles. Quantitative chemical analysis Part 3. Mixtures of acetate with certain other fibres (method using acetone)

BS ISO/IEC 9594-8. Information technology. Open systems interconnection Part 8. The Directory: Public-key and attribute certificate frameworks

BS EN ISO 13919-2. Electron and laser-beam welded joints. Requirements and recommendations on quality levels for imperfections Part 2. Aluminium, magnesium and their alloys and pure copper

BS EN ISO 20347. Personal protective equipment. Occupational footwear

BS ISO/IEC 9594-2. Information technology. Open systems interconnection Part 2. The Directory: Models

BS EN ISO 1973. Textile fibres. Determination of linear density. Gravimetric method and vibroscope method

BS ISO 11443. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers

BS EN 1186-3. Materials and articles in contact with foodstuffs. Plastics Part 3. Test methods for overall migration in evaporable simulants

BS EN 16119. LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing

BS ISO 6622-1. Internal combustion engines. Piston rings Part 1. Rectangular rings made of cast iron

BS EN ISO 1833-18. Textiles. Quantitative chemical analysis Part 18. Mixtures of silk with wool or other animal hair (method using sulfuric acid)

BS EN ISO 1628-1. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1. General principles

BS EN ISO 20344. Personal protective equipment. Test methods for footwear

BS ENISO 15854. Dentistry. Casting and baseplate waxes

BS ISO/IEC 9594-6. Information technology. Open systems interconnection Part 6. The Directory: Selected attribute types

BS EN ISO 22818. Textiles. Determination of SCCP and MCCP in textile products out of different matrices by use of GC-NCI-MS

Gaseous hydrogen land vehicle refuelling connection devices

Copper and copper alloys. Compendium of compositions and products

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for fans

Intelligent transport systems. ITS station security services for secure session establishment and authentication between trusted devices

Marking of electrical equipment with ratings related to electrical supply. Safety requirements

Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications

BS ISO 16573-2. Steel. Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels Part 2. Slow stain rate test

BS EN ISO 2719 AMD 1. Determination of flash point. Pensky-Martens closed cup method

BS EN ISO 23445. Dentistry. Tissue punches

BS ISO 19095-6. Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Part 6. Accelerated degradation test

BS ISO/IEC 9594-4. Information technology. Open systems interconnection Part 4. The Directory: Procedures for distributed operation

BS ISO 13373-4. Condition monitoring and diagnostics of machines. Vibration condition monitoring Part 4. Diagnostic techniques for gas and steam turbines with fluid-film bearings

BS IEC 60884-3-1. Plugs and socket-outlets for household and similar purposes Part 3-1. Particular requirements for socket-outlets incorporating USB power supply

BS IEC 60050-831 Ed.1.0. International Electrotechnical Vocabulary (IEV) Part 831. Smart city systems

Thermoplastics valves. Fatigue strength. Test method

Protective clothing for use in Snowboarding. Wrist Protectors. Requirements and test methods

Enteral feeding systems. Design and testing

Gaseous hydrogen. Fuelling stations General requirements

Electronic fee collection. Requirements for EFC application interfaces on common media

Railway applications. Track. Test methods for fastening systems Effect of repeated loading

Electronic fee collection. Secure monitoring for autonomous toll systems Compliance checking

Plastics. Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions. Test methods and requirements

Intelligent transport systems. Reference model architecture(s) for the ITS sector Requirements for architecture description in ITS standards

Information technology. Security techniques. Evaluation criteria for IT security Security functional components

Safety of machinery. Relationship with ISO 12100 Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects

Extracorporeal systems for blood purification Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

Information technology. Home electronic system (HES) architecture Amplitude modulated wireless short-packet (AMWSP) protocol optimized for energy harvesting. Architecture and lower layer protocols

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode

Hydrogen generators using water electrolysis. Industrial, commercial, and residential applications

Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins

Railway applications. Braking. Relay valves

Information technology for learning, education and training. Learning analytics interoperability Guidelines for data interoperability

Legal translation. Requirements

BS ISO 10013. Quality management systems. Guidance for documented information

BS ISO 16790. Plastics. Determination of drawing characteristics of thermoplastics in the molten state

BS EN 15457. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi

BS ISO 18947-2. Imaging materials and prints. Abrasion resistance Part 2. Rub testing of photographic prints

BS ISO 12647-9. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints Part 9. Metal decoration printing processes using offset lithography

BS EN 1744-4. Tests for chemical properties of aggregates Part 4. Determination of water susceptibility of fillers for bituminous mixtures

BS ISO 3185. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions

BS ISO 20965. Plastics. Determination of the transient extensional viscosity of polymer melts

BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers

BS EN ISO 14881. Integrated optics. Interfaces. Parameters relevant to coupling properties

BS ISO 18947-1. Imaging materials and prints. Abrasion resistance Part 1. General rub testing methods

BS ISO 7358. Essential oils of bergamot, lemon, bitter orange and lime, fully or partially reduced in bergapten. Determination of bergapten content by high-performance liquid chromatography (HPLC)

BS EN 15458. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae

BS EN 14323. Wood-based panels. Melamine faced boards for interior uses. Test methods

Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Space emission systems (heating and cooling)

BS IEC/ASTM 62885-6. Surface cleaning appliances Part 6. Wet hard floor cleaning appliances for household or similar use. Methods for measuring the performance

BS ISO 19626-2. Processes, data elements and documents in commerce, industry and administration. Trusted communication platform for electronic documents Part 2. Applications

BS IEC 60050-631. International Electrotechnical Vocabulary (IEV) Part 631. Electrical energy storage systems

BS ISO/IEC 24383. Information technology. Physical network security for the accommodation of customer premises cabling infrastructure and information technology equipment

BS ISO 24620-3. Language resource management. Controlled human communication (CHC) Part 3. Basic principles and methodology for controlled oral communication (COralCom)

BS ISO 21901. Thermal insulation. Test method for thermal diffusivity. Periodic heat method

Fire safety in the design, management and use of rail infrastructure. Code of practice

Active assisted living (AAL) use cases

Intelligent transport systems. Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) System security requirements

Electronic fee collection. Secure monitoring for autonomous toll systems Trusted recorder

Intelligent transport systems. Definition of data elements and data frames between roadside modules and signal controllers for cooperative signal control

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Smart Metering. Application Specifications. Simple External Consumer Display

Petroleum products. Lubricating grease. Determination of dropping point

BS ISO/IEC 17549-1. Information technology. User interface guidelines on menu navigation Part 1. Framework

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Fibre or cable retention

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

BS EN ISO 23903. Health informatics. Interoperability and Integration Reference Architecture. Model and Framework

International Electrotechnical Vocabulary (IEV) Internet of Things (IoT)

Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties

Machine tools. Test conditions for universal spindle heads Accessory heads for machines with horizontal spindle (horizontal Z-axis)

Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials Preparation of test specimens and determination of properties

Overhead lines. Requirements and tests for spacers

Nanomanufacturing. Key control characteristics Thin-film organic/nano electronic devices. Measurements of charge carrier concentration

Additive manufacturing. Material extrusion-based additive manufacturing of plastic materials Feedstock materials

Specification for additive manufacturing file format (AMF) Version 1.2

Space product assurance. Durability testing of coatings and surface finishes

Flow battery energy systems for stationary applications Performance general requirements and test methods

Flow battery energy systems for stationary applications Safety requirements

Home and Building Electronic Systems (HBES) Media and media dependent layers. Network based on HBES Class 1, Twisted Pair

BS EN 17504. Animal feeding stuffs: Methods of sampling and analysis. Determination of gossypol in cotton seed and feeding stuff by LC-MS/MS

BS EN ISO 20345. Personal protective equipment. Safety footwear

BS EN 14972-15. Fixed firefighting systems. Water mist systems Part 15. Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems

BS ISO 14200. Space environment (natural and artificial). Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km)

BS EN 12732. Gas infrastructure. Welding steel pipework. Functional requirements

BS ISO 22948. Carbon footprint for seafood. Product category rules (CFP-PCR) for finfish

BS ISO 15500-17. Road vehicles. Compressed natural gas (CNG) fuel system components Part 17. Flexible fuel line

BS ISO 22248. Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Classification of medical beam delivery systems

BS EN 13497 AMD1. Thermal insulation products for building applications. Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

BS EN ISO 19957. Footwear. Test methods for heels. Heel pin holding strength

Public transport. Reference data model Driver management

BS ISO 6306. Chemical analysis of steel. Order of listing elements in steel standards

BS EN IEC 60752. Code for designation of colours

BS ISO 21061. Footwear. Chemical tests. General principles on the preparation of samples

BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)

BS ISO 22290. Non-destructive testing. Infrared thermographic testing. Thermoelastic stress measuring method. General Principles

BS ISO 6182-1. Fire protection. Automatic sprinkler systems Part 1. Requirements and test methods for sprinklers

BS ISO/IEC 23000-21 AMD1. Information technology. Multimedia application format (MPEG-A) Part 21. Visual identity management application format

BS ISO 22497. Curtain walling. Terminology

BS EN 62386-150. Digital addressable lighting interface Part 150. Particular requirements. Auxiliary Power Supply

BS IEC 62055-31. Electricity metering. Payment systems Part 31. Particular requirements. Static payment meters for active energy (classes 1 and 2)

BS 8850. Fan Coil Unit Performance. Determination of Specific Fan Power

BS ISO 23673. Plastics. Elasticity index. Determination of elastic property of melts

BS ISO 11661. Mobile cranes. Presentation of rated capacity charts

BS ISO/IEC 20919. Information technology. Linear tape file system (LTFS) Format specification

Information technology. Security techniques. Security requirements for cryptographic modules

BS ISO 7905-2. Plain bearings. Bearing fatigue Part 2. Test with a cylindrical specimen of a metallic bearing material

Intelligent transport systems. Geographic Data Files (GDF) GDF5.1 Application independent map data shared between multiple sources

Information container for linked document delivery. Exchange specification Container

Intelligent transport systems. Service architecture of probe vehicle systems

Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs with specified grades and property classes

Laboratory installations. Ventilation systems in laboratories

Service activities relating to drinking water supply, wastewater and stormwater systems. Guidelines on alternative drinking water service provision during a crisis

Intelligent transport systems. Partially automated lane change systems (PALS). Functional / operational requirements and test procedures

Condition monitoring and diagnostics of machines. Hydroelectric generating units

Intelligent transport systems. Urban-ITS. 'Controlled Zone' management for UVARs using C-ITS

Magnetic materials Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit

Gaseous hydrogen. Fuelling stations Dispenser hoses and hose assemblies

Safety of machinery Examples of application

Gaseous hydrogen. Fuelling stations Fuel quality control

Public transport. Reference data model Management information & statistics

Information technology. Security techniques. Guidelines for privacy impact assessment

Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)

Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection. Safety and security

Communication networks and systems for power utility automation Basic information and communication structure. Abstract communication service interface (ACSI)

Information technology. Security techniques. Methodology for IT security evaluation

Information technology. Security techniques. Evaluation criteria for IT security Security assurance components

Information technology. Security techniques. Evaluation criteria for IT security Introduction and general model

Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance

Communication networks and systems for power utility automation Basic communication structure. Compatible logical node classes and data object classes

Overhead lines. Requirements and tests for Aeolian vibration dampers

Small craft. Ventilation of petrol engine and/or petrol tank compartments

Methods for the calibration of vibration and shock transducers Testing of sensitivity at fixed temperatures

Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation

Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners Nuts with specified grades and property classes

Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation

Mechanical vibration and shock. Experimental determination of mechanical mobility Measurements using impact excitation with an exciter which is not attached to the structure

Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements

BS ISO/IEC 14651. Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering

Code of practice for hearing-loop systems (HLS)

Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries Data schema

Petroleum products. Determination of water separability of petroleum oils and synthetic fluids

Provision of security services. Code of practice

Keyholding and response services. Provision of mobile security services. Code of practice

Expert Commentary for BS 10800:2020. Code of Practice for the provision of security services

Expert Commentary for BS 7984-3:2020. Code of Practice for the provision of mobile security services

Provision of static guarding security services. Code of practice

Code of practice for safety barriers used in traffic management within workplace environments with test methods for safety barrier impact resilience

Expert Commentary for BS 7499:2020. Code of Practice for the provision of static guarding services

BS ISO 21820. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analyzing polytypes of boron and nitrogen doped SiC crystals

BS ISO 15192. Characterization of soil and waste. Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

BS ISO 21256-3. Fine bubble technology. Cleaning applications Part 3. Test method for cleaning hard flooring surfaces

BS EN 17427. Packaging. Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations

BS EN ISO 14708-4. Implants for surgery. Active implantable medical devices Part 4. Implantable infusion pump systems

BS EN ISO 19818. Eye and face protection. Protection against laser radiation Part 1. Requirements and test methods

BS ISO 24627-3. Language resource management. Comprehensive Annotation Framework (ComAF) Part 3. Diagrammatic semantic authoring (DSA)

BS ISO 23662. Definitions and technical criteria for foods and food ingredients suitable for vegetarians or vegans and for labelling and claims

BS ISO 21680. Surface active agents. Bio-based surfactants. Requirements and test methods

BS EN 17500. Quality of care and support for older persons

Public transport. Reference data model Operations monitoring and control

Internet of things (IoT). Interoperability for IoT systems Transport interoperability

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Boxes used for infiltration, attenuation and storage systems Specifications for storm water boxes made of PP and PVC-U

Public transport. Reference data model Fare management

Public transport. Reference data model Passenger information

Nanomanufacturing. Key control characteristics Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes

Nanomanufacturing. Key control characteristics Nano-enabled metal-oxide interfacial devices. Test method for defect states by thermally stimulated current

Forensic sciences Recognition, recording, collecting, transport and storage of items

Liquefied petroleum gases. Calculation method for density and vapour pressure

Electrically propelled road vehicles. Safety specifications Electrical safety

Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design

Primary batteries Guidance on environmental aspects

Mobile waste and recycling containers Containers with 2 wheels with a capacity up to 400 l for comb lifting devices. Dimensions and design

Fuel cell technologies Stationary fuel cell power systems. Safety

Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design

Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of knot staining resistance of wood coatings

Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties

Mobile waste and recycling containers Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design

Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method

Wheat flour and durum wheat semolina. Determination of impurities of animal origin

Evaluation and routine testing in medical imaging departments Acceptance and constancy tests. Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation

Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)

Railway applications. Crashworthiness requirements for rail vehicles

Tests for mechanical and physical properties of aggregates Determination of the polished stone value

BS EN ISO/ASTM 52924. Additive manufacturing. Qualification principles. Classification of part properties for additive manufacturing of polymer parts

BS EN ISO/ASTM 52925. Additive manufacturing processes. Laser sintering of polymer parts/laser-based powder bed fusion of polymer parts. Qualification of materials

Railway applications. Fixed installations. Electric traction overhead contact lines

Wheelchair transport passport schemes. Code of practice

Guideline for safe operation of medical equipment used for haemodialysis treatments

Geographic information. Geography Markup Language (GML) Fundamentals

Jewellery and precious metals. Fineness of solders used with precious metal jewellery alloys

Flanges and their joints. Design rules for gasketed circular flange connections Gasket parameters

Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection

Public transport. Network and Timetable Exchange (NeTEx) Passenger Information European Profile

Intelligent transport systems. Urban ITS. Mixed vendor environments, methodologies & translators

Workplace air. Metals and metalloids in airborne particles. Requirements for evaluation of measuring procedures

Communication networks and systems for power utility automation Basic communication structure. Common data classes

Provision of security services. Code of practice

Environmental management. Environmental communication. Guidelines and examples

Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland firefighting clothing

Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Process assessment guidelines

Petroleum measurement systems. Calibration. Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)

Extenders. Specifications and methods of test Introduction and general test methods

Industrial trucks. Verification of stability Counterbalanced trucks with articulated steering

Fire performance of external cladding systems Test method for non-loadbearing external cladding systems fixed to, and supported by, a masonry substrate

Provision of static guarding security services. Code of practice

Postal services. DPM infrastructure. Messages supporting DPM applications

Information technology. Process assessment. Process assessment model for system life cycle processes

Brazing. Quality requirements for brazing of metallic materials

Preparation of information for use (instructions for use) of products Principles and general requirements

Internal combustion engines. Piston pins Inspection measuring principles

Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes

Chimneys. Accessories Access components. Requirements and test methods

Mobile waste and recycling containers Safety and health requirements

Small craft. Electrical/electronic control systems for steering, shift and throttle

Chimneys. Accessories Flue dampers. Requirements and test methods

Keyholding and response services Provision of mobile security services. Code of practice

Electromagnetic compatibility (EMC) Testing and measurement techniques. IEMI immunity test methods for equipment and systems

Railway applications. Track. Test methods for fastening systems Determination of stiffness

Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis

Intelligent transport systems. Urban ITS. Models anddefinitions for new modes

Intelligent transport systems. Urban ITS. Use of regional traffic standards in a mixed vendor environment

Intelligent transport systems. Urban-ITS. Mixed vendor environment guide

Thyristor valves for thyristor controlled series capacitors (TCSC). Electrical testing

Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for washer-dryers

Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of air inclusions/microfoam in coating films

General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves

Mobile waste and recycling containers Performance requirements and test methods

Flow battery energy systems for stationary applications Terminology and general aspects

Leather. Chemical tests. Quantitative analysis of tanning agents by filter method

Timber structures. Testing of joints made with mechanical fasteners. Requirements for timber density

Determination of the resistance to cryogenic spill of insulation materials Vapour exposure

Road vehicles. Temperature measurement in anthropomorphic test devices. Definition of the temperature sensor locations

Glass packaging. 26 H 126 crown finish. Dimensions

Terminology policies. Development and implementation

Fire performance of external cladding systems Test method for non-loadbearing external cladding systems fixed to, and supported by, a structural steel frame

Camping tents. Requirements and test methods

Timber structures. Glued laminated timber. Face and edge joint cleavage test

Social alarm systems. IP signalling protocols Specification for NOW-IP

Plastics. Wood-plastic recycled composites (WPRC) Specification

Health informatics. Device interoperability Point-of-care medical device communication. Service oriented medical device exchange architecture and protocol binding

Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners General rules for the selection of stainless steels and nickel alloys for fasteners

Condition monitoring and diagnostics of machine systems. Tribology-based monitoring and diagnostics General requirements and guidelines

Industrial valves. Metallic check valves

Animal feeding stuffs: Methods of sampling and analysis. Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS/MS

Conservation of Cultural Heritage. Characterization of mortars used in cultural heritage

Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012)

Fortified milk powders, infant formula and adult nutritionals. Determination of total biotin by liquid chromatography coupled with immunoaffinity column clean-up extraction

Mobile elevating work platforms. Operator's controls. Actuation, displacement, location and method of operation

Timber structures. Laminated veneer lumber. Structural properties

Ferrite cores. Guidelines on dimensions and the limits of surface irregularities EP-cores and associated parts for use in inductors and transformers

Small craft. Bilge-pumping systems

Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)

Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum

Fuel cell technologies Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation

Prosthetics and orthotics. Limb deficiencies Method of describing lower limb amputation stumps

Chimneys. Accessories Chimney silencers. Requirements and test methods

Damp heat, steady state (unsaturated pressurized vapour with air)

Risk management. Guidelines on using ISO 31000 in management systems

Business requirements for end-to-end visibility of logistics flow

Textiles. Determination of index ingredient from coloured textiles Madder

Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)

Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends Blend quantification using light microscopy method

Resilient floor coverings. Heterogeneous poly(vinyl chloride) flooring on foam. Specification

Information technology. Computer graphics, image processing and environmental representation. Sensor representation in mixed and augmented reality

Electronic components. Long-term storage of electronic semiconductor devices Data

Medical electrical equipment Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

Radio frequency identification (RFID) tyre tags. Tyre attachment classification

Timber structures. Bending applications of I-beams Component performance and manufacturing requirements

Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends Blend quantification using spectral analysis method

Plywood. Classification by surface appearance General

Automotive fuels. Information on aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary-butyl acetate when used as blending components in unleaded petrol

Hydrogen-fired gas appliances. Guide

Plain bearings. Pedestal plain bearings Centre flange bearings

Plywood. Classification by surface appearance Hardwood

Road traffic safety. Good practices for implementing commuting safety management

Cigarettes. Determination of ammonia in cigarette mainstream smoke using ion chromatography

Water play equipment and features. Safety requirements, test methods and operational requirements

Leather. Identification of leather with microscopy

Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres

Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends Fibre identification using scanning electron microscopy and spectral analysis methods

Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions Functions for calculation of tilting pad thrust bearings

Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions Guide values for the calculation of tilting pad thrust bearings

Imaging materials. Evaluation of image permanence of photographic colour prints in consumer home applications

Rough-terrain trucks. Safety requirements and verification Variable-reach trucks

Conformance test methods for RFID enabled tyres

UAS traffic management (UTM) Survey results on UTM

Medical electrical equipment Particular requirements for the basic safety and essential performance of home light therapy equipment

Design using geosynthetics General

Paints and varnishes. Electro-deposition coatings Bath stability

Electrically propelled road vehicles. Magnetic field wireless power transfer. Safety and interoperability requirements

Nanotechnologies. Air filter media containing polymeric nanofibres. Specification of characteristics and measurement methods

Nanotechnologies. Considerations for in vitro studies of airborne nano‐objects and their aggregates and agglomerates (NOAA)

Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l

BS ISO 4589-4. Plastics. Determination of burning behaviour by oxygen index Part 4. High gas velocity test

BS ISO/IEC 39794-6. Information technology. Extensible biometric data interchange formats Part 6. Iris image data

BS ISO/IEC 18181-1. Information technology. JPEG XL Image Coding System Part 1. Core coding system

Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS

Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface

Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones

Nanomanufacturing - Key control characteristics - Part 5-3: Thin-film organic/nano electronic devices – Measurements of charge carrier concentration

Live working - Conductive clothing

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders

Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects

Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators

Guidance for installation procedures and tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump-turbines

Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller turbines

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 395: Nuclear instrumentation - Physical phenomena, basic concepts, instruments, systems, equipment and detectors

Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 705: Radio wave propagation

Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 881: Radiology and radiological physics

Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V - Part 1: definitions, end fittings and designations

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity

Analogue audio disk records and reproducing equipment

Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods

Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET

Amendment 6 - International Electrotechnical Vocabulary (IEV) - Part 723: Broadcasting: Sound, television, data

Process management for avionics - Atmospheric radiation effects - Part 8: Proton, electron, pion, muon, alpha-ray fluxes and single event effects in avionics electronic equipment - Awareness guidelines

Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries

Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides

Determination of inrush current characteristics of lighting products

Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180

Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200

Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire

International Electrotechnical Vocabulary (IEV) – Part 741: Internet of Things (IoT)

Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems

Amendment 5 - International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication

Guideline for planning of HVDC systems - Part 1: HVDC systems with line-commutated converters

Amendment 2 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions