News 9/2019

ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1

Walzenstirnfräser mit Quernut und Längsnut - Maße und technische Lieferbedingungen

Elastische Stallbodenbeläge im Lauf- und Liegebereich von Rindern und Milchkühen - Anforderungen und Prüfung

Wärmeschutz und Energie-Einsparung in Gebäuden - Teil 4: Wärme- und feuchteschutztechnische Bemessungswerte; Änderung A1

Lichtmessung - Teil 10: Leuchtdichtemesskamera, Begriffe, Eigenschaften und deren Kennzeichnung

Bestimmung von Barium, Nickel und anderen Elementen in kosmetischen Mitteln und Tätowiermitteln mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma (ICP-OES) nach Druckaufschluss

Feuerlösch-Schlauchanschlusseinrichtungen - Teil 3: Schlauchanschlussventile PN 16; Änderung A1

Anwendungsspezifische Vorbereitung von Baustoffprüfkörpern zur Bestimmung ihrer photokatalytischen Aktivität

Zahnheilkunde - Abrasionsprüfung für Glattflächenversiegler

Anlagen zur In-Situ Erzeugung von Bioziden zur Wasserbehandlung - Chlor - Aktives Chlor, hergestellt durch Elektrolyse von Natriumchlorid oder Salzsäure (In-Situ-System)

Probenahmearmaturen in der Trinkwasserinstallation - Anforderungen und Prüfungen

Leitungsgebundene LMN-Protokolle

Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP-MS) - Allgemeine Grundlagen und Begriffe

Lubricants - Lubricating oils - Part 1: Lubricating oils C, Minimum requirements

Lubricants - Lubricating oils - Part 2: Lubricating oils CL, Minimum requirements

Messverfahren zur Bestimmung der Solarisation von Lichtleitfasern und Faserbündeln aus optischem Glas

Anforderungen an die Validierungen von Reinigungs- und Desinfektionsverfahren

Lufttechnische Systeme - Luftzähler und Luftenergiezähler - Anforderungen

Automotive fuels - LPG - Requirements and test methods

Fibreboards - Specifications - Part 4: Requirements for softboards

Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing

Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing

Structural design of buried pipelines under various conditions of loading - Part 1: General requirements

Thermal energy meters - Part 1: General requirements (includes Amendment A1:2018)

Thermal energy meters - Part 2: Constructional requirements (includes Amendment A1:2018)

Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018)

Thermal energy meters - Part 5: Initial verification tests (includes Amendment A1:2019)

Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance (includes Amendment A1:2019)

Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete

Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation; German and English version FprEN 4861:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties; German and English version EN 10222-2:2017/prA1:2019

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019

Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability; German and English version EN 12956:1999/A1:2001

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (includes Amendment A2:2018)

Geosynthetic barriers - Determination of permeability to liquids

Railway applications - Infrastructure - Flash butt welding of new rails - Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant

Decorative wallcoverings - Roll form

Gas infrastructure - Safety Management System for Gas Networks with maximum operating pressure up to and including 16 bar

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 1: General requirements

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: Onshore unit, additional requirements

Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements

Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications; English version prEN 16157-5:2019

Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance; German and English version EN 16750:2017/prA1:2019

Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 1: Duvet (excluding duvet covers)

Textile child care articles - Safety requirements and test methods for children's cot bumpers

Textile child care articles - Safety requirements and test methods for children's sleep bags for use in a cot

Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification; German and English version prEN 17418:2019

Energy performance of buildings - Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7; German and English version prEN 17423:2019

Foodstuffs - Determination of aflatoxins in spices other than paprika by IAC clean-up and HPLC-FLD with post-column derivatization; German and English version prEN 17424:2019

Foodstuffs - Determination of ergot alkaloids in cereals and cereal products by dSPE clean-up and LC-MS/MS; German and English version prEN 17425:2019

Conservation of cultural heritage - Procurement of conservation services and works; German and English version prEN 17429:2019

Chemical disinfectants and antiseptics - Hygienic handrub virucidal - Test method and requirements (phase 2/step 2); German and English version prEN 17430:2019

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 21: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 1 (IEC 60384-21:2019); Deutsche Fassung EN IEC 60384-21:2019

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2 (IEC 60384-22:2019); Deutsche Fassung EN IEC 60384-22:2019

Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (IEC 51/1276/CD:2019); Text in German and English

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements (IEC 59/693/CD:2018); Text in German and English

Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 30: Behandlung nicht hermetisch verkappter oberflächenmontierbarer Bauelemente vor Zuverlässigkeitsprüfungen (IEC 47/2562/CDV:2019); Deutsche Fassung prEN IEC 60749-30:2019

Industrial platinum resistance thermometers and platinum temperature sensors (IEC 65B/1144/CD:2018); Text in German and English

Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen (IEC 60809:2014/A3:2019); Deutsche Fassung EN 60809:2015/A3:2019

OPC unified architecture - Part 3: Address Space Model (IEC 65E/601/CDV:2018); English version prEN IEC 62541-3:2018

OPC Unified Architecture - Part 4: Services (IEC 65E/602/CDV:2018); English version prEN IEC 62541-4:2018

OPC Unified Architecture - Part 5: Information Model (IEC 65E/603/CDV:2018); English version prEN IEC 62541-5:2018

OPC unified architecture - Part 6: Mappings (IEC 65E/607/CDV:2018); English version prEN IEC 62541-6:2018

OPC unified architecture - Part 7: Profiles (IEC 65E/608/CDV:2018); English version prEN IEC 62541-7:2018

OPC Unified Architecture - Part 8: Data Access (IEC 65E/609/CDV:2018); English version prEN IEC 62541-8:2018

OPC Unified Architecture - Part 9: Alarms and conditions (IEC 65E/610/CDV:2018); English version prEN IEC 62541-9:2018

OPC Unified Architecture - Part 10: Programs (IEC 65E/611/CDV:2018); English version prEN IEC 62541-10:2018

OPC Unified Architecture - Part 11: Historical Access (IEC 65E/612/CDV:2018); English version prEN IEC 62541-11:2018

OPC Unified Architecture Specification - Part 12: Discovery (IEC 65E/615/CDV:2018); English version prEN IEC 62541-12:2018

OPC Unified Architecture - Part 13: Aggregates (IEC 65E/613/CDV:2018); English version prEN IEC 62541-13:2018

OPC Unified Architecture - Part 14: PubSub (IEC 65E/617/CDV:2018); English version prEN IEC 62541-14:2018

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification (IEC 51/1295/CD:2019); Text in German and English

Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores (IEC 51/1294/CD:2019); Text in German and English

Lighting systems - General requirements (IEC 34/597/CD:2019); Text in German and English

Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - SAR Airborne equipment - Operational and performance requirements, methods of test and required test results (IEC 63135:2018); English version EN IEC 63135:2019

Intelligente Verkehrssysteme (IVS) - Funktionen der Einrichtungsschicht - Teil 1: Spezifikation zur Bekanntgabe von Diensten (SA) (Anerkennung der Englischen Fassung EN 302 890-1 V1.2.1 (2019-07) als Deutsche Norm)

Tonrundfunkempfänger - Teil 1: Allgemeine Anforderungen und Messverfahren (Anerkennung der Englischen Fassung EN 303 345-1 V1.1.1 (2019-06) als Deutsche Norm)

Plastics - Determination of flexural properties (ISO 178:2019)

General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)

Plastics - Evaluation of the action of microorganisms (ISO 846:2019)

Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)

Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks - Amendment 2 (ISO 3691-2:2016/DAM 2:2019); German and English version EN ISO 3691-2:2016/prA2:2019

Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019)

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013) (includes Amendment A2:2019)

Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)

Steel - Determination of nitrogen - Spectrophotometric method (ISO 4945:2018)

Steel and cast iron - Determination of vanadium content - Potentiometric titration method (ISO/DIS 4947:2019); German and English version prEN ISO 4947:2019

Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO/DIS 6259-2:2019); German and English version prEN ISO 6259-2:2019

Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017)

Dentistry - Dental explorer (ISO 7492:2019)

Ferronickels - Determination of sulfur content - Infra-red absorption method after combustion in an induction furnace [Routine method] (ISO/DIS 7526:2019); German and English version prEN ISO 7526:2019

Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)

Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)

Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)

Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)

Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)

Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)

Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:2019)

Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3: Determination of released-particle count (ISO 8871-3:2003 + Amd 1:2018) (includes Amendment A1:2019)

Liquefied petroleum gases - Calculation method for density and vapour pressure - Amendment 1 (ISO 8973:1997/DAM 1:2019); German and English version EN ISO 8973:1999/prA1:2019

Nonwovens - Vocabulary (ISO 9092:2019)

Thermal insulation - Vocabulary (ISO/DIS 9229:2019); German and English version prEN ISO 9229:2019

Dentistry - Intra-oral mirrors (ISO 9873:2019)

Lighters - Safety specifications (ISO 9994:2018)

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)

Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)

Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/DAM 1:2019); German and English version EN ISO 10893-1:2011/prA1:2019

Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/DAM 1:2019); German and English version EN ISO 10893-2:2011/prA1:2019

Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/DAM 2:2019); German and English version EN ISO 10893-3:2011/prA2:2019

Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/DAM 1:2019); German and English version EN ISO 10893-8:2011/prA1:2019

Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/DAM 1:2019); German and English version EN ISO 10893-9:2011/prA1:2019

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change the ultrasonic test frequency of transducers; change of acceptance criteria (ISO 10893-10:2011/DAM 1:2019); German and English version EN ISO 10893-10:2011/prA1:2019

Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change the ultrasonic test frequency of transducers; change of acceptance criteria (ISO 10893-11:2011/DAM 1:2019); German and English version EN ISO 10893-11:2011/prA1:2019

Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/DAM 1:2019); German and English version EN ISO 10893-12:2011/prA1:2019

Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)

Building construction - Organization of information about construction works - Part 2: Framework for classification (ISO 12006-2:2015); German and English version prEN ISO 12006-2:2019

Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 4: Assessment of pilling, fuzzing or matting by visual analysis (ISO/DIS 12945-4:2019); German and English version prEN ISO 12945-4:2019

Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2013); German and English version prEN ISO 13165-1:2019

Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/DAM 1:2019); German and English version EN ISO 13688:2013/prA1:2019

Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996/DAM 1:2019); German and English version EN ISO 13758:1996/prA1:2019

Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/DIS 14907-1:2019); English version prEN ISO 14907-1:2019

Soil quality - Characterization of contaminated soil related to groundwater protection (ISO 15175:2018)

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 2 (ISO 15614-1:2017/DAM 2:2019); German and English version EN ISO 15614-1:2017/prA2:2019

Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)

Radiological protection - Medical electron accelerators - Requirements and recommendations for shielding design and evaluation (ISO 16645:2016); German and English version prEN ISO 16645:2019

Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)

Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes (ISO 18557:2017); German and English version prEN ISO 18557:2019

Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017); German and English version prEN ISO 19226:2019

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling- Part 1: Concepts and principles (ISO 19650-1:2018)

Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA (ISO 20186-1:2019)

Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA (ISO 20186-2:2019)

Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO/DIS 20785-2:2019); German and English version prEN ISO 20785-2:2019

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21306-1:2019)

Dentistry - Central compressed air source equipment (ISO/DIS 22052:2019); German and English version prEN ISO 22052:2019

Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)

Water quality - Technetium-99 - Part 1: Test method using liquid scintillation counting (ISO/FDIS 22125-1:2019); German and English version FprEN ISO 22125-1:2019

Ground investigation and testing - Field testing - Part 9: Field vane test (FVT und FVT-F) (ISO/DIS 22476-9:2019); German and English version prEN ISO 22476-9:2019

Leather - Measuring the colour and colour difference of finished leather (ISO 22700:2019)

Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO/DIS 22751:2019); German and English version prEN ISO 22751:2019

Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO/DIS 23062:2019); German and English version prEN ISO 23062:2019

Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)

Industrial furnaces and associated processing equipment - Safety requirements for steel converter and associated equipment (ISO/DIS 23495:2019); German and English version prEN ISO 23495:2019

Small-bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2018)

Medical electrical equipment - Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment (ISO 80601-2-74:2017); German and English version prEN ISO 80601-2-74:2019

Nanofertigung - Großtechnische Produktion von Nanoelektronik (IEC/IEEE 62659:2015)

Optics and photonics - Optical coatings - Part 5: Minimum requirements for antireflecting coatings (ISO 9211-5:2018); Text in German and English

Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings (ISO 9211-6:2018); Text in German and English

Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitting coatings (ISO 9211-7:2018); Text in German and English

Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations (ISO 10003:2018)

Optik und Photonik - Interferometrische Messung von optischen Elementen und Systemen - Teil 4: Interpretation und Beurteilung der Toleranzen nach ISO 10110; Beiblatt 1

Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English

Water quality - Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum (ISO 16191:2013)

Imaging materials - Multiple media archives - Storage environment (ISO 18934:2011)

Intelligente Verkehrssysteme - Verkehrsmanagementsysteme - Status-, Fehler- und Qualitätsanforderungen; Deutsche Fassung CEN/TS 17241:2019

Fenster und Türen - Wohnungseingangstüren - Kriterien für die Auswahl von Anforderungen und Merkmalen

Verfahren zur Messung von technisch notwendigen manuellen Betätigungskräften

Fußverbände in der medizinischen Fußbehandlung zum einmaligen Gebrauch - Anforderungen und Prüfverfahren

Entwicklung digitaler Dienstleistungssysteme

Digitale Planung, Prüfung und erforderliche Dokumentation von Gerüsten

Data Exchange on the Base of Property Value Statements

Bahnanwendungen - Festigkeitsanforderungen an Hohlwellen

Brand- und Explosionsschutz für Becherwerke; Deutsche Fassung CEN/TR 16829:2016+AC:2019

Zähigkeit von Rundstahlketten - Prüfung mit Kleinkerbschlagbiegeproben

Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth

Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints

Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology

Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding

Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption

Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas fired appliances combined with electrical heat pump

Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 2: Assemblies

LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m3

LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m3

Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype

Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in kaplan, francis and pelton turbines

Pump system energy assessment

Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods

Fans - Performance testing using standardized airways

Ventilation for buildings - Performance measurement and checks for residential ventilation systems

Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 1: Size range from 20 nm to 500 nm

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings

Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices

Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 2: Customized cold rooms

Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution

Ophthalmic optics - Spectacle lenses - Vocabulary

Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors

Thermal energy meters - Part 2: Constructional requirements

Thermal energy meters - Part 4: Pattern approval tests

Conveyor belts - Drum friction testing

Light conveyor belts - Part 2: List of equivalent terms

Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity

Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity

Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity

Powered industrial trucks - Visibility - Test methods and verification - Part 7: Variable-reach and masted container trucks handling freight containers of 6 m (20 ft) length and longer

Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings

Railway applications - Rolling stock maintenance - Maintenance records

Railway applications - Rolling stock maintenance - Terms and definitions

Railway applications - Requirements and general principles for securing payload in rail freight transport

Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements

Railway applications - Braking - Brake block holder and brake block key

Railway applications - Braking - Brake blocks

Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems

Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply

Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle

Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies

Space product assurance - Crimping of high-reliability electrical connections

Space product assurance - Ultracleaning of flight hardware

Space engineering - Exchange of thermal analysis data

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance

Aerospace series - Cables, optical, 125 um diameter cladding - Part 106: Semi-loose structure 62,5/125 um GI fibre nominal 0,9 mm outside diameter - Product standard

Aerospace series - Cables, optical, 125 um diameter cladding - Part 201: Semi-loose structure 9/125 um SM fibre nominal 1,8 mm outside diameter - Product standard

Aerospace series - Cables, optical, 125 um diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 um SM fibre nominal 2,74 mm outside diameter - Product standard

Aerospace series - Designation of metallic semi-finished products - Rules

Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings

Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXXseries and aluminium-lithium alloys

Aerospace series - Steel 31Ni10 - 1 230 MPa <= Rm <= 1 420 MPa - Bars - De <= 40 mm

Aerospace series - Aluminium and aluminium alloy - Square and rectangular extruded bars - Dimensions

Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a <= 75 mm

Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm <= (a or D) <= 150 mm - With peripheral coarse grain control

Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a <= 20 mm

Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a <= 20 mm

Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm <= a <= 12,5 mm

Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient temperature)/120 °C

Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads

Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads

Aerospace series - Acceptance parameters of aesthetical variations for all visible equipment installed in aircraft cabins under all contractual variations

Aerospace series - Anthropometric dimensioning of aircraft seats

Rotorcraft - Emergency Breathing Systems (EBS) - Requirements, testing and marking

Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

Wind energy generation systems - Part 1: Design requirements

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods

Coaxial cables - Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz

Coaxial cables - Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz

Coaxial cables - Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 6 000 MHz

Coaxial cables - Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz

Coaxial cables - Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz

Coaxial cables - Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Distribution and trunk cables for systems operating at 5 MHz - 2 000 MHz

Coaxial cables - Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Distribution and trunk cables for systems operating at 5 MHz - 2 000 MHz

Electricity metering data exchange - the DLMS/COSEM suite - Part 8-4: Communication profiles for narrow-band OFDM PLC PRIME neighbourhood networks

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

Simplex and duplex cables for use in terminated cable assemblies - Part 1: Blank Detail Specification and minimum requirements

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires

Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19)

Secondary cells and batteries - Marking symbols for identification of their chemistry

Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters

Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias

Natural gas - Energy determination

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge alarm valves

Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric and lattice girders

Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel

Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry

Founding - Malleable cast irons

Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers

Petroleum, petrochemical and natural gas industries - Production assurance and reliability management

Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation

Petroleum and natural gas industries - Steel drill pipe

Petroleum, petrochemical and natural gas industries - Scheme for conformity assessment of manufacturers of special materials

Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes

Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design

Forestry machinery - Safety requirements on radio remote controls

General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method

Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing

Cryogenic vessels - Hoses

Glass in building - Determination of the emissivity

Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance

Product category rules for ceramic tiles

Acoustics - Determination of airflow resistance - Part 1: Static airflow method

Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members

Testing fresh concrete - Part 1: Sampling and common apparatus

Testing fresh concrete - Part 2: Slump test

Testing fresh concrete - Part 3: Vebe test

Testing fresh concrete - Part 4: Degree of compactability

Testing fresh concrete - Part 5: Flow table test

Testing fresh concrete - Part 7: Air content - Pressure methods

Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test

Testing hardened concrete - Part 2: Making and curing specimens for strength tests

Testing hardened concrete - Part 3: Compressive strength of test specimens

Testing hardened concrete - Part 5: Flexural strength of test specimens

Testing hardened concrete - Part 7: Density of hardened concrete

Testing hardened concrete - Part 8: Depth of penetration of water under pressure