Set EN 13480 1-8

(released 2024/07)

- Metallic industrial piping includes 

ILNAS EN 13480-1:2024/07 Metallic industrial piping - Part 1: General

EN 13480-1 Metallic industrial piping - Part 1: General - This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure.

ILNAS EN 13480-2:2024/07 Metallic industrial piping - Part 2: Materials

EN 13480-2 Metallic industrial piping - Part 2: Materials - This document specifies the requirements for steel products used for industrial piping and supports. For some metallic materials other than steel, such as spheroidal graphite cast iron, aluminium, nickel, copper, titanium, requirements are or will be formulated in separate parts of this document. For metallic materials which are not covered by a harmonized material standard and are not likely to be in near future, specific rules are given in this part or the above cited parts of this document.

ILNAS EN 13480-3:2024/07 Metallic industrial piping - Part 3: Design and calculation

EN 13480-3 Metallic industrial piping - Part 3: Design and calculation - This document specifies the design and calculation of industrial metallic piping systems, including supports, covered by EN 13480 series

ILNAS EN 13480-4:2024/07 Metallic industrial piping - Part 4: Fabrication and installation

EN 13480-4 Metallic industrial piping - Part 4: Fabrication and installation - This document specifies the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3:2024

ILNAS EN 13480-5:2024/07 Metallic industrial piping - Part 5: Inspection and testing

EN 13480-5 Metallic industrial piping - Part 5: Inspection and testing -This document specifies the requirements for inspection and testing of industrial piping as specified in EN 13480-1:2024 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3:2024 and EN 13480-6:2024 (if applicable), and fabricated and installed in accordance with EN 13480-4:2024

ILNAS EN 13480-6:2024/07 Metallic industrial piping - Part 6: Additional requirements for buried piping

EN 13480-6 Metallic industrial piping - Part 6: Additional requirements for buried piping - This document specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of EN 13480:2024 series. Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition can be made at a closing element e.g. an isolating or regulating valve separating the two sections. This can be close to the boundary of the industrial site, but can be inside or outside the boundary. Operating temperature up to 75 °C. NOTE For higher temperatures reference can be made to EN 13941-1:2019+A1:2021, but it is kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.

ILNAS EN 13480-8:2024/07 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

EN 13480-8 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping - This document specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480:2024 and CEN/TR 13480-7:2017. It specifies requirements for wrought products only. NOTE Castings is not covered in this document.