News 10/2019
in stock
Released: 2019-09-11
Sistemas de protección de los pasos salvacunetas (SPPS). Clases de comportamiento, métodos de ensayo y evaluación de la conformidad.
in stock
Released: 2019-09-18
Procedimiento para la inspección reglamentaria. Ascensores. Parte 1: Aparatos de elevación recogidos en legislación de ascensores.
in stock
Released: 2019-09-18
Procedimiento para la inspección reglamentaria. Equipos a presión. Parte 3: Requisitos específicos para refinerías y plantas petroquímicas.
in stock
Released: 2019-09-25
Seguridad contra incendios. Señalización de seguridad. Parte 1: Señales y balizamiento de los sistemas y equipos de protección contra incendios.
in stock
Released: 2019-09-11
Seguridad contra incendios. Elementos de cerramiento de huecos. Requisitos específicos de instalación, uso, mantenimiento. Parte 2: Cortinas cortafuego.
in stock
Released: 2019-09-25
Envases y embalajes. Valor de las normas armonizadas para la gestión ambiental de envases y embalajes.
in stock
Released: 2019-09-25
Plásticos. Bolsa de plástico con alto contenido en reciclado para el transporte de productos. Parte 1: Generalidades.
in stock
Released: 2019-09-25
Plásticos. Bolsa de plástico con alto contenido en reciclado para el transporte de productos. Parte 2: Bolsas de Polietileno (PE).
in stock
Released: 2019-09-25
Plásticos. Sistemas de evacuación de agua (a baja y a alta temperatura) incluyendo sistemas sifónicos, en el interior de la estructura de los edificios y para canalones y bajantes pluviales en el exterior. Prácticas recomendadas para la instalación.
in stock
Released: 2019-09-25
Plásticos. Materiales de polietileno (PE) reciclado. Características.
in stock
Released: 2019-09-25
Llaves metálicas de obturador esférico y de macho cónico, accionadas manualmente, con o sin limitador de caudal y/o de temperatura, para instalaciones receptoras que utilizan combustibles gaseosos a presiones máximas de operación (MOP) inferior o igual a 0,5 MPa (5 bar). Características dimensionales y de bloqueo.
in stock
Released: 2019-09-11
Calidad del agua. Determinación de sulfuros. Método iodométrico y método colorimétrico.
in stock
Released: 2019-09-11
Hormigonado en condiciones ambientales que pueden afectar a las propiedades del hormigón. Parte 2: Hormigonado en condiciones que pueden producir la desecación externa del hormigón.
in stock
Released: 2019-09-25
Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsing effectiveness by measurement of the surfactant content at textile materials
Lavadoras eléctricas y lavadoras-secadoras eléctricas para usos domésticos y análogos. Métodos para la determinación de la eficacia de enjuague mediante la medición del contenido de tensioactivos en materiales textiles.
in stock
Released: 2019-09-11
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
Dispositivos de control eléctrico automático. Parte 2-9: Requisitos particulares para dispositivos de control termosensibles.
in stock
Released: 2019-09-11
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
Dispositivos de control eléctrico automático. Parte 2-9: Requisitos particulares para dispositivos de control termosensibles.
in stock
Released: 2019-09-25
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
Fibra óptica. Parte 1-32: Métodos de medida y procedimientos de ensayo. Pelado del revestimiento.
in stock
Released: 2019-09-25
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
Compatibilidad electromagnética (CEM). Parte 6-1: Normas genéricas. Inmunidad en entornos residenciales, comerciales y de industria ligera.
in stock
Released: 2019-09-25
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
Compatibilidad electromagnética (CEM). Parte 6-2: Normas genéricas. Inmunidad en entornos industriales.
in stock
Released: 2019-09-25
Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
Módulos y sistemas fotovoltaicos de concentración (CPV). Cualificación de seguridad.
in stock
Released: 2019-09-25
Protection against lightning - Thunderstorm warning systems
Protección contra el rayo. Sistemas de aviso de tormentas.
in stock
Released: 2019-09-25
Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the ring method
Líquidos aislantes. Métodos de ensayo para la determinación de la tensión interfacial de los líquidos aislantes. Determinación por el método del anillo.
in stock
Released: 2019-09-11
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018)
Sistemas de canalización en materiales plásticos para renovación de redes de saneamiento y alcantarillado enterradas sin presión. Parte 3: Entubado ajustado. (ISO 11296-3:2018).
in stock
Released: 2019-09-25
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018)
Sistemas de canalización en materiales plásticos para renovación de redes de saneamiento y alcantarillado con presión. Parte 3: Entubado ajustado. (ISO 11297-3:2018).
in stock
Released: 2019-09-25
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
Sistemas de canalización en materiales plásticos para la renovación de redes de conducción de agua enterradas. Parte 3: Entubado ajustado. (ISO 11298-3:2018).
in stock
Released: 2019-09-11
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
Plásticos. Determinación de la viscosidad empleando un viscosímetro de caída de bola. Parte 1: Método del tubo inclinado. (ISO 12058-1:2018).
in stock
Released: 2019-09-18
Environmental management - Material flow cost accounting - Guidance for practical implementation in a supply chain (ISO 14052:2017)
Gestión ambiental. Contabilidad de costos de flujo de materiales. Directrices para la implementación práctica en la cadena de suministro. (ISO 14052:2017).
in stock
Released: 2019-09-18
Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO 14067:2018)
Gases de efecto invernadero. Huella de carbono de productos. Requisitos y directrices para la cuantificación. (ISO 14067:2018).
in stock
Released: 2019-09-25
Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)
Plásticos. Placas de polietileno moldeadas por compresión (PE-UHMW, PE-HD). Requisitos y métodos de ensayo. (ISO 15527:2018).
in stock
Released: 2019-09-25
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)
Acústica. Ruido en galerías de tiro. Parte 3: Cálculos de propagación del sonido. (ISO 17201-3:2019).
in stock
Released: 2019-09-25
Intelligent transport systems - Automatic vehicle and equipment identification - Numbering and data structures - Amendment 1 (ISO 17262:2012/Amd 1:2019)
Sistemas inteligentes de transporte. Identificación automática de vehículos y equipos. Numeración y estructuras de datos. Modificación 1. (ISO 17262:2012/Amd 1:2019).
in stock
Released: 2019-09-11
Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
Investigación y ensayos geotécnicos. Ensayos de laboratorio de suelos. Parte 10: Ensayos de corte directo. (ISO 17892-10:2018).
in stock
Released: 2019-09-25
Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
Investigación y ensayos geotécnicos. Ensayos de laboratorio de suelos. Parte 4: Determinación de la distribución granulométrica. (ISO 17892-4:2016).
in stock
Released: 2019-09-25
Plastics - Test specimens (ISO 20753:2018)
Plásticos. Probetas. (ISO 20753:2018).
in stock
Released: 2019-09-25
Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques - Amendment 1 (ISO 24534-4:2010/Amd 1:2019)
Identificación automática de vehículos y equipos. Identificación electrónica de matrículas (ERI) para vehículos. Parte 4: Comunicaciones seguras utilizando técnicas asimétricas. Modificación 1. (ISO 24534-4:2010/Amd 1:2019).
in stock
Released: 2019-09-25
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
Plásticos. Moldeo por inyección de probetas de materiales termoplásticos. Parte 2: Barras pequeñas para tracción. (ISO 294-2:2018).
in stock
Released: 2019-09-25
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
Plásticos. Moldeo por inyección de probetas de materiales termoplásticos. Parte 4: Determinación de la contracción de moldeo. (ISO 294-4:2018).
in stock
Released: 2019-09-25
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:2018)
Plásticos. Preparación de pastas de PVC para ensayos. Método del mezclador planetario. (ISO 4612:2018).
in stock
Released: 2019-09-25
Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
Materiales metálicos. Ensayo de dureza Brinell. Parte 2: Verificación y calibración de las máquinas de ensayo. (ISO 6506-2:2017).
in stock
Released: 2019-09-25
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2019)
Aceros para tratamiento térmico, aceros aleados y aceros de fácil mecanización. Parte 3: Aceros para cementar. (ISO 683-3:2019).
in stock
Released: 2019-09-11
Resilient floor coverings - Cork floor tiles - Specification
Revestimientos de suelo resilientes. Losetas de corcho aglomerado. Especificación.
in stock
Released: 2000-02-28
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
Sistemas de canalización en materiales plásticos. Tubos y accesorios termoplásticos para agua caliente y fría. Método de ensayo para determinar la resistencia de los acoplamientos de unión a ciclos de temperatura.
in stock
Released: 2000-02-28
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
Sistemas de canalización en materiales plásticos. Sistemas para agua caliente y fría. Método de ensayo de estanquidad en condiciones de vacío.
in stock
Released: 2019-09-25
Testing hardened concrete - Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
Ensayos de hormigón endurecido. Parte 10: Determinación de la resistencia a la carbonatación del hormigón a niveles atmosféricos de dióxido de carbono.
in stock
Released: 2019-09-11
Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
Ensayos de hormigón endurecido. Parte 11: Determinación de la resistencia a los cloruros del hormigón, difusión unidireccional.
in stock
Released: 2019-09-25
Gas meters - Conversion devices - Part 1: Volume conversion
Contadores de gas. Dispositivos de conversión. Parte 1: Conversión de volumen.
in stock
Released: 2019-09-25
Natural stone - Denomination criteria
Piedra natural. Criterios de denominación.
in stock
Released: 2019-09-25
Bituminous mixtures - Test methods - Part 44: Crack propagation by semi-circular bending test
Mezclas bituminosas. Métodos de ensayo. Parte 44: Propagación de la fisuración mediante un ensayo a flexión de una probeta semicircular.
in stock
Released: 2019-09-25
Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
Eficiencia energética de los edificios. Método para el cálculo de la carga térmica de diseño. Parte 3: Carga térmica de los sistemas de agua caliente sanitaria y caracterización de la demanda. Módulos M8-2, M8-3.
in stock
Released: 2019-09-25
Road vertical signs - Variable message traffic signs
Señalización vertical en carretera. Paneles de mensaje variable.
in stock
Released: 2019-09-25
Textile floor coverings - Classification
Revestimientos de suelo textiles. Clasificación.
in stock
Released: 2019-09-25
Binders for floor screeds based on calcium sulphate - Part 2: Test methods
Aglomerantes para suelos autonivelantes a base de sulfato de calcio. Parte 2: Métodos de ensayo.
in stock
Released: 2019-09-25
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
Sistemas de canalización en materiales plásticos para saneamiento y alcantarillado enterrado sin presión. Sistemas de canalización de pared estructurada de poli(cloruro de vinilo) no plastificado (PVC-U), polipropileno (PP) y polietileno (PE). Parte 2: Especificaciones para tubos y accesorios con superficie interna y externa lisa y el sistema, de Tipo A.
in stock
Released: 2019-09-25
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
Sistemas de canalización en materiales plásticos para saneamiento y alcantarillado enterrado sin presión. Sistemas de canalización de pared estructurada de poli(cloruro de vinilo) no plastificado (PVC-U), polipropileno (PP) y polietileno (PE). Parte 3: Especificaciones para tubos y accesorios con superficie interna lisa y superficie externa perfilada y el sistema, de Tipo B.
in stock
Released: 2019-09-25
Fire resistance tests for non-loadbearing elements - Part 1: Walls
Ensayos de resistencia al fuego de elementos no portantes. Parte 1: Paredes.
in stock
Released: 2019-09-25
Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
Aplicaciones ferroviarias. Aerodinámica. Parte 4: Requisitos y procedimientos de ensayo aerodinámicos al aire libre.
in stock
Released: 2019-09-25
Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
Aplicaciones ferroviarias. Frenado. Requisitos para el sistema de frenado de trenes remolcados por locomotora.
in stock
Released: 2019-09-18
Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets
Ventanas y puertas. Norma de producto, características de prestación. Parte 2: Puertas peatonales interiores.
in stock
Released: 2019-09-25
Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
Aplicaciones ferroviarias. Métodos para el cálculo de las distancias de frenado de parada y desaceleración e inmovilización. Parte 1: Algoritmos generales que utilizan el cálculo del valor medio de composiciones de trenes o vehículos aislados.
in stock
Released: 2019-09-25
Railway applications - Vehicle reference masses
Aplicaciones ferroviarias. Masas de referencia de los vehículos.
in stock
Released: 2019-09-25
Railway applications - Driver's cab - Part 1: Anthropometric data and visibility
Aplicaciones ferroviarias. Cabina del maquinista. Parte 1: Visibilidad, disposición y acceso.
in stock
Released: 2019-09-25
Railway applications - Driver's cab - Part 3: Design of displays
Aplicaciones ferroviarias. Cabina del maquinista. Parte 3: Diseño de dispositivos de visualización.
in stock
Released: 2019-09-25
Earthworks - Part 2: Classification of materials
Obras de tierra. Parte 2: Clasificación de materiales.
in stock
Released: 2019-09-25
Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat
Aplicaciones ferroviarias. Protección contra incendios de los vehículos ferroviarios. Ensayo de comportamiento frente al fuego para asientos completos.
in stock
Released: 2019-09-25
Conservation of cultural heritage - Surface protection for porous inorganic materials - Technical and chemical data sheets of water repellent product
Conservación del patrimonio cultural. Protección de la superficie de los materiales inorgánicos porosos. Fichas de datos técnicos y químicos de productos hidrófugos.
in stock
Released: 2019-09-25
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
Especificación para los métodos y aparatos de medida de las perturbaciones radioeléctricas y de la inmunidad a las perturbaciones radioeléctricas. Parte 4-2: Incertidumbres, estadísticas y modelización de límites. Incertidumbre de la instrumentación de medida.
in stock
Released: 2019-09-11
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
Aparatos electrodomésticos y análogos. Seguridad. Parte 2-15: Requisitos particulares para aparatos de calentamiento de líquidos.
in stock
Released: 2019-09-11
Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
Aparatos electrodomésticos y análogos. Seguridad. Parte 2-99: Requisitos particulares para campanas eléctricas para uso comercial.
in stock
Released: 2019-09-11
Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
Aparatos electrodomésticos de cocción. Parte 2: Encimeras. Métodos de medida de la aptitud a la función.
in stock
Released: 2019-09-11
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
Aparatos electrodomésticos y análogos. Código de ensayo para la determinación del ruido aéreo. Parte 2-14: Requisitos particulares para los refrigeradores, armarios de almacenaje de alimentos congelados y congeladores de alimentos.
in stock
Released: 2019-09-25
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
Reglas de seguridad para la construcción e instalación de ascensores. Aplicaciones particulares para ascensores de pasajeros y de pasajeros y cargas. Parte 77: Ascensores sujetos a condiciones sísmicas.
in stock
Released: 2019-09-11
Sistemas de gestión de la calidad. Directrices para la aplicación de la Norma ISO 9001 en el gobierno local.
in stock
Released: 2019-09-25
Turismo y servicios relacionados. Sistema de gestión de la sostenibilidad para alojamientos. Requisitos.
in stock
Released: 2019-09-18
Vehículos agrícolas. Uniones mecánicas entre vehículos remolcados y vehículos tractores. Parte 5: Especificaciones para enganches tipo boca no giratorios.
FREE SHIPPING
Released: 2019
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
FREE SHIPPING
Released: 2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for arealtopography measuring methods
FREE SHIPPING
Released: 2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss
FREE SHIPPING
Released: 2019
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
FREE SHIPPING
Released: 2019
Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors
FREE SHIPPING
Released: 2019
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 16: Hardware for Lift and Slide windows
FREE SHIPPING
Released: 2019
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 17: Hardware for Tilt and Slide windows
FREE SHIPPING
Released: 2019
Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks
FREE SHIPPING
Released: 2019
Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 2: Test in workshop for new, modified and maintained vehicles
FREE SHIPPING
Released: 2019
Railway applications - Systems and procedures for change of track gauge - Part 1: Automatic Variable Gauge Systems
FREE SHIPPING
Released: 2019
Space product assurance - High-reliability soldering for surface-mount and mixed technology
FREE SHIPPING
Released: 2019
Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties
FREE SHIPPING
Released: 2019
Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard
FREE SHIPPING
Released: 2019
Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
FREE SHIPPING
Released: 2019
Aerospace series - Connectors, electrical, circular, scoopproof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, hermetic, square flange mounting - Product standard
FREE SHIPPING
Released: 2019
Aerospace series - Connectors, electrical, circular, scoopproof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product standard
FREE SHIPPING
Released: 2019
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard
FREE SHIPPING
Released: 2019
Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm <= a <= 5 mm
FREE SHIPPING
Released: 2019
Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm <= D <= 10 mm
FREE SHIPPING
Released: 2019
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D <= 50 mm - 1 270 MPa <= Rm <= 1 550 MPa
FREE SHIPPING
Released: 2019
Aerospace series - Heat resisting nickel base alloy (Ni- P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm <= D <= 30 mm
FREE SHIPPING
Released: 2019
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 150 mm - 1 200 MPa <= Rm <= 1 400 MPa
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm <= D <= 50 mm
FREE SHIPPING
Released: 2019
Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a <= 150 m
FREE SHIPPING
Released: 2019
Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D <= 75 mm
FREE SHIPPING
Released: 2019
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
FREE SHIPPING
Released: 2019
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature) / 425 °C
FREE SHIPPING
Released: 2019
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread - Classification: 600 MPa (at ambient temperature) / 425 °C
FREE SHIPPING
Released: 2019
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
FREE SHIPPING
Released: 2019
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C
FREE SHIPPING
Released: 2019
Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, tests
FREE SHIPPING
Dielectric and resistive properties of solid insulating materials - Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperatures
FREE SHIPPING
Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers
FREE SHIPPING
Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers
FREE SHIPPING
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load
FREE SHIPPING
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
FREE SHIPPING
Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
FREE SHIPPING
Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
FREE SHIPPING
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
FREE SHIPPING
Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors
FREE SHIPPING
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
FREE SHIPPING
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 13: PQ-cores
FREE SHIPPING
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
FREE SHIPPING
Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies
FREE SHIPPING
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
FREE SHIPPING
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic
FREE SHIPPING
Dynamic modules - Part 1: Performance standards - General conditions
FREE SHIPPING
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
FREE SHIPPING
Released: 2019
Biometrics multilingual vocabulary based upon the English version of ISO/IEC 2382-37:2012
FREE SHIPPING
Released: 2015
Determination of ferrite content in austenitic stainless steel castings
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded nonalloy and alloy steel tubes with specified elevated temperature properties
FREE SHIPPING
Released: 2019
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded nonalloy steel tubes with specified low temperature properties
FREE SHIPPING
Released: 2019
Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
FREE SHIPPING
Released: 2019
Microbiology of the food chain - Requirements and guidelines for conducting challenge tests of food and feed products - Part 1: Challenge tests to study growth potential, lag time and maximum growth rate
FREE SHIPPING
Released: 2019
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
FREE SHIPPING
Released: 2019
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
FREE SHIPPING
Released: 2019
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
FREE SHIPPING
Released: 2019
Plastics - Ultra-high-molecular-weight polyethylene (PEUHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
FREE SHIPPING
Released: 2019
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications
FREE SHIPPING
Released: 2019
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
FREE SHIPPING
Released: 2019
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties
FREE SHIPPING
Released: 2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 1: General
FREE SHIPPING
Released: 2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
FREE SHIPPING
Released: 2019
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 5: Fitness for purpose of the system
FREE SHIPPING
Released: 2019
Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure
FREE SHIPPING
Released: 2019
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
FREE SHIPPING
Released: 2019
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension
FREE SHIPPING
Released: 2019
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
FREE SHIPPING
Released: 2019
Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings
FREE SHIPPING
Released: 2019
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation
FREE SHIPPING
Released: 2019
Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
FREE SHIPPING
Released: 2019
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
FREE SHIPPING
Released: 2019
Railway applications - Track - Track geometry quality - Part 1: Characterization of track geometry
FREE SHIPPING
Released: 2019
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
FREE SHIPPING
Released: 2019
Water quality - Gross alpha and gross beta activity - Test method using thin source deposit
FREE SHIPPING
Released: 2019
Water quality - Guidance on analysis of mesozooplankton from marine and brackish waters
FREE SHIPPING
Released: 2019
Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method
FREE SHIPPING
Released: 2019
Leather - Chemical determination of metal content - Part 1: Extractable metals
FREE SHIPPING
Released: 2019
Leather - Chemical determination of metal content - Part 2: Total metal content
FREE SHIPPING
Released: 2019
Leather - Measuring the colour and colour difference of finished leather
FREE SHIPPING
Released: 2018
Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
FREE SHIPPING
Released: 2018
Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamide)
FREE SHIPPING
Released: 2019
Ergonomics of human-system interaction - Part 220: Processes for enabling, executing and assessing humancentred design within organizations
FREE SHIPPING
Released: 2019
Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Part 1: Requirements and choice of test methods
FREE SHIPPING
Released: 2019
Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 2: Rotating drum method
FREE SHIPPING
Released: 2019
Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 3: Continuous drop method
FREE SHIPPING
Released: 2019
Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 4: Small rotating drum method
FREE SHIPPING
Released: 2019
Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5: Vortex shaker method
FREE SHIPPING
Released: 2019
Sterilization of health care products - Biological indicators - Part 7: Guidance for the selection, use and interpretation of results
FREE SHIPPING
Released: 2019
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
FREE SHIPPING
Released: 2019
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
FREE SHIPPING
Released: 2019
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA
FREE SHIPPING
Released: 2019
Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated cellular RNA
FREE SHIPPING
Released: 2019
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
FREE SHIPPING
Released: 2019
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces
FREE SHIPPING
Released: 2019
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
FREE SHIPPING
Released: 2019
Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM)
immediate download
Released: 2016-12
Fasteners - Wing nuts - Rounded wings
Mechanische Verbindungselemente - Flügelmuttern - Runde Flügelform
immediate download
Released: 2018-12
Cross recessed pan head screws with collar - Product grade A
Linsenkopfschrauben mit Bund und Kreuzschlitz - Produktklasse A
immediate download
Released: 2019-10
Thermische Energiespeicher - Terminologie, Anforderungen, Kenngrößen, Prüfgrundlagen
Thermische Energiespeicher - Terminologie, Anforderungen, Kenngrößen, Prüfgrundlagen
immediate download
Released: 2018-10
Identification of pipelines according to the fluid conveyed
Kennzeichnung von Rohrleitungen nach dem Durchflussstoff
immediate download
Released: 2019-10
Kältetechnik; Gewindezapfen, Rohrbördel 90° für lötlose Rohrverschraubungen, PN 40; Berichtigung 1
Kältetechnik; Gewindezapfen, Rohrbördel 90° für lötlose Rohrverschraubungen, PN 40; Berichtigung 1
immediate download
Released: 2020-07
Sachmerkmal-Listen - Teil 190: Spannvorrichtungen
Sachmerkmal-Listen - Teil 190: Spannvorrichtungen
immediate download
Released: 2020-07
Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 190: Spannvorrichtungen
Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 190: Spannvorrichtungen
immediate download
Released: 2019-10
Spiralbohrer mit Schneiden aus Hartmetall mit verstärktem Zylinderschaft - Maße
Spiralbohrer mit Schneiden aus Hartmetall mit verstärktem Zylinderschaft - Maße
immediate download
Released: 2017-02
Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
Pressverbände - Teil 1: Berechnungsgrundlagen und Gestaltungsregeln für zylindrische Pressverbände
immediate download
Released: 2019-10
Kältetechnik; Lötlose Rohrverschraubungen mit gebördeltem Rohr; PN 40; Berichtigung 1
Kältetechnik; Lötlose Rohrverschraubungen mit gebördeltem Rohr; PN 40; Berichtigung 1
immediate download
Released: 2018-09
Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for cable ducting - Dimensions and technical delivery conditions
Rohre und Formstücke aus weichmacherfreiem Polyvinylchlorid (PVC-U) für den Kabelschutz - Maße und Technische Lieferbedingungen
immediate download
Released: 2018-09
Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions and technical delivery conditions
Rohre aus Polyethylen hoher Dichte (PE-HD) für die erdverlegte Telekommunikation - Maße und technische Lieferbedingungen
immediate download
Released: 2020-07
Zahnheilkunde - Begriffe der implantierbaren Augmentationsmaterialien
Zahnheilkunde - Begriffe der implantierbaren Augmentationsmaterialien
immediate download
Released: 2019-10
Tragwerke aus Beton, Stahlbeton und Spannbeton - Teil 120: Ergänzende Regeln zu DIN EN 13369
Tragwerke aus Beton, Stahlbeton und Spannbeton - Teil 120: Ergänzende Regeln zu DIN EN 13369
immediate download
Released: 2020-04
Galvanische Überzüge - Zinnüberzüge auf Eisen- und Kupferwerkstoffen
Galvanische Überzüge - Zinnüberzüge auf Eisen- und Kupferwerkstoffen
immediate download
Released: 2018-09
Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
Schmierstoffe - Schmieröle - Teil 3: Schmieröle CLP, Mindestanforderungen
immediate download
Released: 2016-08
Particle size analysis - Sieving analysis - Part 1: Fundamentals
Partikelgrößenanalyse - Siebanalyse - Teil 1: Grundlagen
immediate download
Released: 2016-08
Particle size analysis - Sieving analysis - Part 2: Procedure
Partikelgrößenanalyse - Siebanalyse - Teil 2: Durchführung
immediate download
Released: 2019-10
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German and English version EN 378-1:2016/prA1:2019
Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 1: Grundlegende Anforderungen, Begriffe, Klassifikationen und Auswahlkriterien; Deutsche und Englische Fassung EN 378-1:2016/prA1:2019
immediate download
Released: 2019-10
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; German and English version EN 378-2:2016/prA1:2019
Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 2: Konstruktion, Herstellung, Prüfung, Kennzeichnung und Dokumentation; Deutsche und Englische Fassung EN 378-2:2016/prA1:2019
immediate download
Released: 2019-10
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German and English version EN 378-3:2016/prA1:2019
Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 3: Aufstellungsort und Schutz von Personen; Deutsche und Englische Fassung EN 378-3:2016/prA1:2019
immediate download
Released: 2019-08
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing
Druckmessgeräte - Teil 3: Druckmessgeräte mit Platten- und Kapselfedern; Maße, Messtechnik, Anforderungen und Prüfung
immediate download
Released: 2019-09
Fire resistance tests for service installations - Part 13: Chimneys
Feuerwiderstandsprüfungen für Installationen - Teil 13: Abgasanlagen
immediate download
Released: 2019-10
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions; German and English version EN 1793-6:2018/prA1:2019
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 6: Produktspezifische Merkmale - In-situ-Werte der Luftschalldämmung in gerichteten Schallfeldern; Deutsche und Englische Fassung EN 1793-6:2018/prA1:2019
immediate download
Released: 2019-09
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen
immediate download
Released: 2019-04
National Annex - Nationally determined parameters - Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads
Nationaler Anhang - National festgelegte Parameter - Eurocode 1: Einwirkungen auf Tragwerke - Teil 1-3: Allgemeine Einwirkungen - Schneelasten
immediate download
Released: 2019-10
Nationaler Anhang - National festgelegte Parameter - Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-4: Allgemeine Bemessungsregeln - Ergänzende Regeln zur Anwendung von nichtrostenden Stählen; Änderung A1
Nationaler Anhang - National festgelegte Parameter - Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-4: Allgemeine Bemessungsregeln - Ergänzende Regeln zur Anwendung von nichtrostenden Stählen; Änderung A1
immediate download
Released: 2019-10
Nationaler Anhang - National festgelegte Parameter - Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von Anschlüssen; Änderung A1
Nationaler Anhang - National festgelegte Parameter - Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-8: Bemessung von Anschlüssen; Änderung A1
immediate download
Released: 2017-10
National Annex - Nationally determined parameters - Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Nationaler Anhang - National festgelegte Parameter - Eurocode 9: Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-4: Kaltgeformte Profiltafeln
immediate download
Released: 2019-10
Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product standard; German and English version FprEN 4840-102:2019
Luft- und Raumfahrt - Wärmeschrumpfende Formteile - Teil 102: Elastomer, halbsteif, Temperaturbereich -75 °C bis 150 °C - Produktnorm; Deutsche und Englische Fassung FprEN 4840-102:2019
immediate download
Released: 2020-02
Rotorcraft - Emergency Breathing Systems (EBS) - Requirements, testing and marking; German and English version EN 4856:2018
Drehflügler - Notfallbeatmungssystem (EBS) - Anforderungen, Prüfung und Kennzeichnung; Deutsche und Englische Fassung EN 4856:2018
immediate download
Released: 2020-03
Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance; German and English version EN 4875:2020
Luft- und Raumfahrt - Oberflächenbehandlungen - Prüfverfahren zur Messung des elektrischen Kontaktwiderstands; Deutsche und Englische Fassung EN 4875:2020
immediate download
Released: 2019-09
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
Kunststoff- und Gummimaschinen - Zerkleinerungsmaschinen - Teil 4: Sicherheitsanforderungen für Agglomeratoren
immediate download
Released: 2019-09
Testing fresh concrete - Part 1: Sampling and common apparatus
Prüfung von Frischbeton - Teil 1: Probenahme und Prüfgeräte
immediate download
Released: 2019-09
Testing fresh concrete - Part 2: Slump test
Prüfung von Frischbeton - Teil 2: Setzmaß
immediate download
Released: 2019-09
Testing fresh concrete - Part 3: Vebe test
Prüfung von Frischbeton - Teil 3: Vébé-Prüfung
immediate download
Released: 2019-09
Testing fresh concrete - Part 4: Degree of compactability
Prüfung von Frischbeton - Teil 4: Verdichtungsmaß
immediate download
Released: 2019-09
Testing fresh concrete - Part 5: Flow table test
Prüfung von Frischbeton - Teil 5: Ausbreitmaß
immediate download
Released: 2019-09
Testing fresh concrete - Part 6: Density
Prüfung von Frischbeton - Teil 6: Frischbetonrohdichte
immediate download
Released: 2019-09
Testing fresh concrete - Part 7: Air content - Pressure methods
Prüfung von Frischbeton - Teil 7: Luftgehalt - Druckverfahren
immediate download
Released: 2019-09
Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test
Prüfung von Frischbeton - Teil 8: Selbstverdichtender Beton - Setzfließversuch
immediate download
Released: 2019-09
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
Prüfung von Beton in Bauwerken - Teil 1: Bohrkernproben - Herstellung, Untersuchung und Prüfung der Druckfestigkeit
immediate download
Released: 2019-10
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German and English version EN 12516-2:2014/prA1:2019
Industriearmaturen - Gehäusefestigkeit - Teil 2: Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus Stahl; Deutsche und Englische Fassung EN 12516-2:2014/prA1:2019
immediate download
Released: 2019-09
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, hartgelötete Flaschen aus Stahl für Flüssiggas (LPG) - Auslegung und Herstellung
immediate download
Released: 2019-09
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
Stationäre Abfallsammelbehälter bis 5 000 l, mit Behälteraufnahme an der Oberseite und Bodenentleerung - Teil 1: Allgemeine Anforderungen
immediate download
Released: 2019-09
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
Stationäre Abfallsammelbehälter bis 5 000 l, mit Behälteraufnahme an der Oberseite und Bodenentleerung - Teil 2: Zusätzliche Anforderungen für unterirdische oder teilweise unterirdische Systeme
immediate download
Released: 2019-09
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
Atemschutzgeräte - Prüfverfahren - Teil 7: Bestimmung des Durchlasses von Partikelfiltern
immediate download
Released: 2019-09
Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
Prüfverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 7: Brandschutzmaßnahmen für Holzbauteile
immediate download
Released: 2019-09
Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion (includes Amendment A1:2019)
Abgasanlagen - Wärme- und strömungstechnische Berechnungsverfahren - Teil 1: Abgasanlagen mit einer Verbrennungseinrichtung (enthält Änderung A1:2019)
immediate download
Released: 2019-09
Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one combustion appliance (includes Amendment A1:2019)
Abgasanlagen - Wärme- und strömungstechnische Berechnungsverfahren - Teil 2: Abgasanlagen mit mehreren Verbrennungseinrichtungen (enthält Änderung A1:2019)
immediate download
Released: 2019-09
Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, tests
Fahrzeuge der Binnenschifffahrt - Schwimmende Anlegestellen und schwimmende Brücken auf Binnengewässern - Anforderungen, Prüfungen
immediate download
Released: 2019-09
Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains
Getreide und Getreideerzeugnisse - Hartweizen (T. durum Desf.) - Bestimmung des prozentualen Anteils an mehligen Körnern und Berechnung des prozentualen Anteils an glasigen Körnern
immediate download
Released: 2019-10
Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods; German and English version prEN 15685:2019
Schlösser und Baubeschläge - Mehrfachverriegelungs-Schlösser und Schließbleche - Anforderungen und Prüfverfahren; Deutsche und Englische Fassung prEN 15685:2019
immediate download
Released: 2019-10
Extended application of results from fire resistance tests for service installations - Part 5: Combined penetration seals; German and English version prEN 15882-5:2019
Erweiterter Anwendungsbereich der Ergebnisse aus Feuerwiderstandsprüfungen für Installationen - Teil 5: Kombinierte Abschottungen; Deutsche und Englische Fassung prEN 15882-5:2019
immediate download
Released: 2019-08
Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
Boden, behandelter Bioabfall und Schlamm - Bestimmung von polycyclischen aromatischen Kohlenwasserstoffen (PAK) mittels Gaschromatographie (GC) und Hochleistungs-Flüssigkeitschromatographie (HPLC)
immediate download
Released: 2019-09
Railway applications - Driver's cab - Part 4: Layout and access
Bahnanwendungen - Führerraum - Teil 4: Gestaltung und Zugang
immediate download
Released: 2019-09
LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training
Flüssiggas-Geräte und Ausrüstungsteile - Werkstätten für Autogasfahrzeuge - Teil 2: Sachkunde und Ausbildung des Personals
immediate download
Released: 2019-10
Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces; German and English version prEN 16759:2019
Geklebte Glaskonstruktionen für Türen, Fenster und Vorhangfassaden - Überprüfung der mechanischen Leistungseigenschaften der Verklebung auf Aluminium- und Stahloberflächen; Deutsche und Englische Fassung prEN 16759:2019
immediate download
Released: 2019-09
Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks
Energieeffizienz von Flurförderzeugen - Prüfverfahren - Teil 4: Geländegängige Flurförderzeuge mit veränderlicher Reichweite
immediate download
Released: 2019-09
Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
Energetische Bewertung von Gebäuden - Lüftung von Gebäuden - Teil 17: Leitlinien für die Inspektion von Lüftungs- und Klimaanlagen (Module M4-11, M5-11, M6-11, M7-11)
immediate download
Released: 2019-09
Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 4: Flurförderzeuge mit veränderlicher Reichweite bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kg
immediate download
Released: 2019-10
Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity; German and English version prEN 16842-5:2019
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 5: Flurförderzeuge mit veränderlicher Reichweite mit einer Nenntragfähigkeit größer als 10000 kg; Deutsche und Englische Fassung prEN 16842-5:2019
immediate download
Released: 2019-10
Powered industrial trucks - Visibility - Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity; German and English version prEN 16842-8:2019
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 8: Gegengewichtstapler mit stehendem Bediener bis einschließlich einer Nenntragfähigkeit von 10000 kg; Deutsche und Englische Fassung prEN 16842-8:2019
immediate download
Released: 2019-09
Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
Außenluft - Probenahme und Analyse luftgetragener Pollen und Pilzsporen für Allergienetzwerke - Volumetrische Hirst-Methode
immediate download
Released: 2019-09
Railway applications - Ground based services - Vehicle waste water discharge equipment (includes Amendment :2019)
Bahnanwendungen - Versorgungsdienste - Fahrzeugabwasserentsorgungseinrichtungen (enthält Änderung :2019)