News 4/2020

BS EN 8.3552. Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 °C

BS EN 3381. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MOS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/ 315°C

BS EN 8.3557. Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification : 1 100 MPa (at ambient temperature) / 425 °C

BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification 1 550 MPa (at ambient temperature) / 600°C

BS EN 3685. Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650°C. Technical specification

BS EN 3.3558. Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 °C

BS EN 8.3556. Aerospace series. Screws, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS₂ lubricated. Classification : 1 100 MPa (at ambient temperature) / 315 °C

BS EN 8.3554. Aerospace series. Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated. Classification : 1 100 MPa (at ambient temperature) / 425 °C

BS EN 8.3553. Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification : 900 MPa (at ambient temperature) / 650 °C

BS EN 8.3555. Aerospace series. Screws, pan head, Spiral Drive Recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 °C

BS EN 3833. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650 °C. Technical specification

BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C

BS EN 4496. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification 1 100 MPa (at ambient temperature) / 315°C

BS EN 8.3559. Aerospace series. Screws, 100° countersunk normal head, Spiral Drive Recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 °C

BS EN 4604-010. Aerospace series. Cable, electrical, for signal transmission. Part 010. Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD). Product standard

BS EN 2583. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), Classification: 1 275 MPa (at ambient temperature)/650°C. Technical specification

BS EN 4708-104. Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Part 104. Semi-rigid polyvinylidene fluoride. Temperature range -55°C and 175°C

BS EN 3645-004. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Part 004. Receptacle, hermetic, square flange mounting. Product standard

BS EN 3645-010. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Part 010. Receptacle, hermetic, round flange, jam nut mounting. Product standard

BS EN 4604-010. Aerospace series. Cable, electrical, for signal transmission. Part 010. Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (light WD). Product standard

BS EN 3645-005. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Part 005. Receptacle, hermetic, round flange, brasage mounting. Product standard

BS EN 4071. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C

BS EN 4165-018. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 018. Protective cover for all receptacles series 2. Product standard Part 003: Plastic cable ties — Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C — Product standard

BS EN 3833. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650 °C. Technical specification

BS EN 4711. Aerospace series. Screw, 12-point flange head (bi hexagonal head bolt), long thread, for tensile applications, continuous fibre reinforced-PEEK composite, temperature range -65°C to 135°C. Inch series

BS EN 4857-005. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 005. Receptacle, hermetic, round flange, brasage mounting. Product standard

BS EN 4857-003. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 003. Receptacle square flange mounting. Product standard

BS EN 4857-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 002. Specification of performance and contact arrangements

prEN 4857-009. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 009. Receptacle, round flange, jamnut mounting. Product standard

BS EN 4857-004. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 004. Receptacle, hermetic, square flange mounting. Product standard

BS EN 2267-010. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between - 55 °C and 260 °C. Part 010. DR family, single UV laser printable. Product standard

prEN 4857-010. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 010. Receptacle, hermetic, round flange, jam nut mounting. Product standard

prEN 4857-007. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 007. Protective cap for plug. Product standard

BS EN 4713. Aerospace series. Nuts, anchor, self-locking, floating. Continuous fibre reinforced PEEK composite, temperature range -65°C to 135°C. Inch series

prEN 4857-006. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 006. Protective cap for receptacle. Product standard

BS EN 4857-1. Aerospace series. Miniature Connectors, High density, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatures 175 °C continuous or 200 °C continuous. Shell sizes : 05 to 07 Part 001. Technical specification

prEN 4857-008. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous. Part 008. Non release plug with grounding ring. Product standard Part 008: Non release plug with grounding ring - Product standard

BS EN 60331-2. Tests for electric cables under fire conditions. Circuit integrity. Part 2. Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm

BS EN 2854-002. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm². Operating temperatures between -55°C and 260°C Part 002. General

Tracked Changes. Founding. Liquid penetrant testing Investment castings

Tracked Changes. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity

Tracked Changes. Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity

BS EN 60204-1 AMD1. Safety of machinery. Electrical equipment of machines Part 1. General requirements

Tracked Changes. Environmental management systems. General guidelines on implementation

Tracked Changes. Non-destructive testing of steel tubes Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

Tracked Changes. Non-destructive testing of steel tubes Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes

Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus Emission

Tracked Changes. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 4 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 19 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 12 elements

Tracked Changes. Certification of energy efficiency measure installation in existing buildings and insulation in residential park homes

Tracked Changes. Non-destructive testing of steel forgings Ultrasonic testing of ferritic or martensitic steel forgings

Tracked Changes. Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity

Tracked Changes. CleANopen. Application profile for municipal vehicles

Tracked Changes. Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity

Tracked Changes. Material declaration for products of and for the electrotechnical industry

Tracked Changes. Maritime works Code of practice for the design of quay walls, jetties and dolphins

Tracked Changes. Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A On-shore unit, additional requirements

Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter

Tracked Changes. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity

BS EN 60331-3. Tests for electric cables under fire conditions. Circuit integrity. Part 3. Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

Tracked Changes. Letter symbols to be used in electrical technology Telecommunications and electronics

Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation

Tracked Changes. Plastics piping systems for water supply and for drainage and sewerage under pressure. Polyethylene (PE) General

Tracked Changes. Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Pipes

Tracked Changes. Low-voltage electrical installations Functional aspects. Energy efficiency

Tracked Changes. Information technology. Security techniques. Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1

Tracked Changes. Closed circuit television (CCTV). Management and operation. Code of practice

Tracked Changes. Non-destructive testing of steel forgings Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

Tracked Changes. Packaging for terminally sterilized medical devices Paper bags. Requirements and test methods

Tracked Changes. Air Traffic Management. Information security for organisations supporting civil aviation operations

Tracked Changes. Quality Management Systems. Requirements for Aviation, Space and Defence Distributors

Tracked Changes. Tyres and wheels Wheels and rims. Section 7b: Code of practice for the selection and care of tyres and wheels for commercial vehicles

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 23 elements

Tracked Changes. Design management systems Guide to managing the design of manufactured products

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 12 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 4 elements

Tracked Changes. Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 2

Tracked Changes. Aerospace series. Flammability of non-metallic materials Small burner test, horizontal. Determination of the horizontal flame propagation

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 3 elements

Tracked Changes. Information technology. Governance of IT for the organization

Tracked Changes. Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CP 3/4, CP 3/5 and CP 3/6

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out

Tracked Changes. Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 23 elements

Tracked Changes. Field device tool (FDT) interface specification Object model integration profile. Common object model

Tracked Changes. Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CPF 6

Tracked Changes. Semiconductor devices. Mechanical and climatic test methods Ionizing radiation (total dose)

Tracked Changes. Secure storage units. Classification and methods of test for resistance to fire Data rooms and data container

Tracked Changes. Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polypropylene film dielectric AC and pulse capacitors

Tracked Changes. Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements

Tracked Changes. Natural stone. Terminology

Tracked Changes. Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods

Tracked Changes. Water quality. Tritium. Test method using liquid scintillation counting

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 21 elements

Tracked Changes. Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 21 elements

Tracked Changes. Elastomeric seismic-protection isolators Guidance on the application of ISO 22762-3

Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems Execution and supervision of paint work

Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems Design considerations

Tracked Changes. Acoustics. Noise from shooting ranges Sound propagation calculations

Tracked Changes. Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods

Tracked Changes. Industrial communication networks. Fieldbus specifications Overview and guidance for the IEC 61158 and IEC 61784 series

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer service definition. Type 21 elements

Tracked Changes. Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance. measurements

Tracked Changes. Construction and testing of drains and sewers

Tracked Changes. Mobile and fixed offshore units. Electrical installations Mobile units

Tracked Changes. Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fittings

Tracked Changes. Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1

Tracked Changes. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)

Tracked Changes. Wall and floor tiling Design and installation of external ceramic, natural stone and mosaic wall tiling in normal conditions. Code of practice

Tracked Changes. Medical devices utilizing animal tissues and their derivatives Controls on sourcing, collection and handling

Tracked Changes. Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 18

Tracked Changes. Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Diesel fuels

Tracked Changes. Roofing and cladding products from metal sheet. Specification for fully supported products of aluminium sheet

Tracked Changes. Briefing for design and construction Code of practice for facilities management (Buildings infrastructure)

Tracked Changes. Road restraint systems. Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers

Tracked Changes. Enhanced security performance requirements for doorsets and windows in the UK. Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk

Tracked Changes. Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation

Tracked Changes. Paints and varnishes. Corrosion protection of steel structures by protective paint systems Classification of environments

Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network Diagnostics services

Tracked Changes. Corrosion tests in artificial atmospheres. Salt spray tests

Tracked Changes. Information technology. Vocabulary Learning, education and training

Tracked Changes. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Procedure for determining and verifying declared noise emission values

Tracked Changes. Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A General requirements

Tracked Changes. Tanks for transport of dangerous goods. Terminology

Tracked Changes. Aluminium and aluminium alloys. Wrought products. Temper designations

Tracked Changes. Information technology. Data centre facilities and infrastructures Environmental control

Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling

Tracked Changes. Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria

Tracked Changes. Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) Determination of selected elements including uranium isotopes

Tracked Changes. Specifications for the re-use of sulphur hexafluoride (SF₆) and its mixtures in electrical equipment

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 12 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 2 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 19 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 12 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 19 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 2 elements

BS EN 3434. Aerospace series. Nuts, hexagon, slotted / castellated, self-locking, in steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235°C

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 4 elements

BS EN 62037-2. Passive RF and microwave devices, intermodulation level measurement Part 2. Measurement of passive intermodulation in coaxial cable assemblies

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 10 elements

Tracked Changes. Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CPF 1

Tracked Changes. Wall and floor tiling Design and installation of ceramic and mosaic tiling in specific conditions. Code of practice

Tracked Changes. Personal protective equipment for work positioning and prevention of falls from a height. Belts and lanyards for work positioning or restraint

Tracked Changes. Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 4 elements

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 3 elements

Tracked Changes. Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CPF 2

Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer service definition. Type 10 elements

Tracked Changes. Field device tool (FDT) interface specification Communication implementation for common object model. IEC 61784 CPF 15

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 24 elements

Tracked Changes. Furniture. Assessment of the ignitability of mattresses and upholstered bed bases Ignition source: match flame equivalent

BS EN IEC 81346-1. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Part 1. Basic rules

Tracked Changes. Ophthalmic optics. Spectacle lenses. Vocabulary

Tracked Changes. Effects of current on human beings and livestock General aspects

Tracked Changes. Building lime Definitions, specifications and conformity criteria

Tracked Changes. Furniture. Assessment of the ignitability of mattresses and upholstered bed bases Ignition source smouldering cigarette

Tracked Changes. Stainless steel bars. Reinforcement of concrete. Requirements and test methods

Tracked Changes. Metal ball valves for petroleum, petrochemical and allied industries

Tracked Changes. Preparation of documents used in electrotechnology Rules

Tracked Changes. Specification for topsoil

Tracked Changes. Door supervision. Code of practice

Tracked Changes. Code of practice for the safe use of construction hoists

Tracked Changes. High-voltage switchgear and controlgear Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminations

Tracked Changes. Protective clothing for use in welding and allied processes

Tracked Changes. Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification

Tracked Changes. Information technology. Data centre facilities and infrastructures Recommended practices for energy management

Tracked Changes. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)

Tracked Changes. Information technology. Data centre facilities and infrastructures Power supply and distribution

Tracked Changes. Language resource management. Lexical markup framework (LMF) Core model

Tracked Changes. Tissue paper and tissue products Vocabulary

Tracked Changes. Multilayer piping systems for hot and cold water installations inside buildings Guidance for the assessment of conformity

Tracked Changes. Intelligent transport systems. Localized communications Legacy system support

Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C

Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650°C

Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C

Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated.Classifi cation: 1100 MPa/650 °C

Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °C

Tracked Changes. Heating boilers Heating boilers with forced draught burners. Specific requirements for the domestic hot water operation and energy performance of water heaters and combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW

Tracked Changes. Steel forgings for pressure purposes General requirements for open die forgings

Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement

Tracked Changes. Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered

Tracked Changes. Furniture. Children's cots and folding cots for domestic use Test methods

Tracked Changes. Quality management. Guidelines for quality management in projects

Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with specifications

BS EN 60286-1 AMD1. Packaging of components for automatic handling Part 1. Tape packaging of components with axial leads on continuous tapes

BS ISO 13253 AMD1. Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance

Tracked Changes. Steel sheet and strip for welded gas cylinders

BS EN 62271-1 AMD1. High-voltage switchgear and controlgear Part 1. Common specifications for alternating current switchgear and controlgear

Tracked Changes. Packaging of components for automatic handling Packaging of surface mount components on continuous tapes

Tracked Changes. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods

Tracked Changes. Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products

Tracked Changes. Medical devices utilizing animal tissues and their derivatives Application of risk management

BS ISO 15042 AMD1. Multiple split-system air conditioners and air-to-air heat pumps. Testing and rating for performance

Tracked Changes. Industrial communication networks. Fieldbus specifications Data-link layer protocol specification. Type 21 elements

Tracked Changes. Industrial-process measurement, control and automation System interface between industrial facilities and the smart grid

Tracked Changes. Plastics. Smoke generation. Determination of the corrosivity of fire effluents General concepts and applicability

Tracked Changes. Case studies supporting IEC 62232. Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure

Tracked Changes. Security consultancy. Code of practice

BS EN IEC 62893-1 AMD1. Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV Part 1. General requirements

Tracked Changes. Vitreous and porcelain enamels. Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing

Tracked Changes. Ergonomics of human-system interaction Human-centred design for interactive systems

Tracked Changes. Fire safety. Vocabulary

Tracked Changes. Road vehicles. Ergonomic aspects of transport information and control systems. Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

BS EN ISO 20743. Textiles. Determination of antibacterial activity of textile products

Tracked Changes. Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide

Tracked Changes. Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding

BS EN IEC 60068-2-11. Basic environmental testing procedures Part 2-11. Tests. Test Ka. Salt mist

Tracked Changes. Influence of materials on water intended for human consumption. Influence due to migration Test method for ion exchange and adsorbent resins

Tracked Changes. Effects of current on human beings and livestock Special aspects

Tracked Changes. Optics and photonics. Preparation of drawings for optical elements and systems Surface form tolerances

Tracked Changes. Bitumen and bituminous binders. Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders Stabilization after recovery by evaporation

Tracked Changes. Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 8

Tracked Changes. Safety of toys Chemical toys (sets) other than experimental sets

Tracked Changes. Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 12

Tracked Changes. Plastics. Evaluation of the action of microorganisms

Tracked Changes. Industrial communication networks. Profiles Fieldbus profiles

Tracked Changes. Environmental testing Tests. Test Xw1: Whisker test methods for components and parts used in electronic assemblies

Tracked Changes. Steel and iron castings. Radiographic testing

Tracked Changes. Qualification testing of welders. Fusion welding Steels

Tracked Changes. Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 6

BS EN 60947-9-2. Low-voltage switchgear and controlgear. Active arc-fault mitigation systems Part 9-2. Optical-based internal arc-detection and mitigation devices

Tracked Changes. Child-resistant packaging. Requirements and testing procedures for reclosable packages

Dimethyl ether (DME) for fuels. Determination of high temperature (105°C) evaporation residues. Mass analysis method

Tracked Changes. Graphic technology. Extensible metadata platform (XMP) Data model, serialization and core properties

Tracked Changes. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Guidance on the estimation of the probability of condensation prior to paint application

Tracked Changes. Management of terminology resources. TermBase eXchange (TBX)

Household and similar electrical appliances. Safety Particular requirements for outdoor barbecues

Water quality. Radon-222 Test method using emanometry

Tracked Changes. Information technology. Data centre facilities and infrastructures Recommended practices for environmental sustainability

Tracked Changes. Packaging for terminally sterilized medical devices Uncoated nonwoven materials of polyolefines. Requirements and test methods

Tracked Changes. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) UML to XML conversion rules

Tracked Changes. Management of terminology resources. Data category specifications

Water quality. Radon-222 Test method using gamma-ray spectrometry

Water quality. Radon-222 General principles

Tracked Changes. Packaging for terminally sterilized medical devices Adhesive coated nonwoven materials of polyolefines. Requirements and test methods

Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 °C

Tracked Changes. Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties

Tracked Changes. Paints, varnishes and plastics. Determination of non-volatile-matter content

Tracked Changes. Fire resistance tests for service installations Fire dampers

Tracked Changes. Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems

Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods Thermal endurance for conductors

Tracked Changes. Cranes. General design Limit states and proof of competence of forged hooks

Paints and varnishes. Wettability Determination of the surface tension of liquids using the pendant drop method

Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes

Tracked Changes. Textiles. Quantitative chemical analysis Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane)

Tracked Changes. Information and documentation. Management systems for records. Requirements

Tracked Changes. Microstructure of cast irons Graphite classification by visual analysis

Tracked Changes. Corrosion resistant steel castings

Tracked Changes. LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction

BS ISO 5151 AMD1. Non-ducted air conditioners and heat pumps. Testing and rating for performance

Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide

BS EN 50399. Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results

Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation

Tracked Changes. Hydraulic machines. Guidelines for dealing with hydro-abrasive erosion in kaplan, francis, and pelton turbines

Tracked Changes. Petroleum and natural gas industries. Procedures for testing casing and tubing connections

Tracked Changes. Textiles. Quantitative chemical analysis Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)

Tracked Changes. Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units

Tracked Changes. Water quality. Gross alpha and gross beta activity. Test method using thin source deposit

Tracked Changes. Dentistry. Dental explorer

Tracked Changes. Nanotechnologies. Health and safety practices in occupational settings

Tracked Changes. Specification and qualification of welding procedures for production welding of steel castings

Tracked Changes. Conformity assessment. Requirements for bodies providing audit and certification of management systems Requirements

Tracked Changes. Dynamic modules Performance standards. General conditions

Tracked Changes. Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of environmental management systems

BS ISO/IEC 10646. Information technology. Universal coded character set (UCS)

Tracked Changes. Plastics. Polyamides. Accelerated conditioning of test specimens

Tracked Changes. Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components

Tracked Changes. Steels and cast irons. Determination of nickel content. Flame atomic absorption spectrometric method (FAAS)

Tracked Changes. Water quality. Gross beta activity. Test method using thick source

Tracked Changes. Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems

Tracked Changes. Plastics. Poly(vinyl alcohol) (PVAL) materials Determination of properties

Tracked Changes. Geosynthetic barriers. Determination of permeability to liquids

Tracked Changes. Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices

Tracked Changes. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Particular requirements for hedge trimmers

Tracked Changes. Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1:2018

Tracked Changes. Heat exchanger. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement

Tracked Changes. Industrial communication networks. Profiles Additional fieldbus profiles for real-time networks based on ISO/IEC/IEEE 8802-3

BS EN IEC 60335-2-11 AMD AA. Household and similar electrical appliances. Safety Part 2-11. Particular requirements for tumble dryers

Tracked Changes. Road vehicles. Ergonomic and performance aspects of Camera Monitor Systems. Requirements and test procedures

Tracked Changes. Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes

Tracked Changes. Resilient floor coverings. Cork floor tiles. Specification

Tracked Changes. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Particular requirements for hand-held drain cleaners

Tracked Changes. Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment

Tracked Changes. Awnings for leisure accommodation vehicles. Requirements and test methods

Tracked Changes. Space systems. Programme management and quality. Vocabulary

Tracked Changes. Optics and photonics. General optical test methods. Measurement of relative irradiance in the image field

Environmentally conscious design (ECD). Principles, requirements and guidance

Tracked Changes. Planning, design, setting up and use of temporary suspended access equipment. Code of practice

Tracked Changes. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) UML modelling rules (TPEG2-UMR)

Tracked Changes. Fertilizers and liming materials. Vocabulary Terms relating to liming materials

Tracked Changes. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Service framework (TPEG2-SFW)

Measurement of smoke density of cables burning under defined conditions Test apparatus

BS ISO 32000-2. Document management. Portable document format Part 2. PDF 2.0

Tracked Changes. Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings

Tracked Changes. Guide to durability of buildings and building elements, products and components

Tracked Changes. Copper and copper alloys. Rod for free machining purposes

Tracked Changes. Paper, board, pulps and cellulose nanomaterials. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

Tracked Changes. Copper and copper alloys. Rod for general purposes

Water quality. Radium-226 Test method using coprecipitation and gamma-spectrometry

Tracked Changes. Information technology. Data centre facilities and infrastructures General concepts

Tracked Changes. Copper and copper alloys. Wrought and unwrought forging stock

Tracked Changes. Specification for plastic films for electrical purposes Specifications for individual materials. Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation

Water quality. Radium-226 Test method using liquid scintillation counting

Tracked Changes. Copper and copper alloys. Wire for general purposes

Tracked Changes. Implants for surgery. Ceramic materials Composite materials based on a high-purity alumina matrix with zirconia reinforcement

BS EN IEC 62807-3. Hybrid telecommunication cables Part 3. Outdoor hybrid cables. Sectional specification

Tracked Changes. Plastics. Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics for sheets of thickness not less than 1 mm

BS IEC 62899-503-2. Printed electronics Part 503-2. Quality assessment. Test method for Electrical characterization of Roll-toroll printed TFT active matrix

Tracked Changes. Protective clothing. Protection against flame. Method of test for limited flame spread

Tracked Changes. Application integration at electric utilities. System interfaces for distribution management Interfaces for records and asset management

BS EN IEC 61788-22-1. Superconductivity Part 22-3. Superconducting strip photon detector. dark count rate

Tracked Changes. Methods of test for mortar for masonry Determination of adhesive strength of hardened rendering and plastering mortars on substrates

Tracked Changes. Non-alloy steel wire rod for conversion to wire Specific requirements for general purpose wire rod

Tracked Changes. Inland navigation vessels. Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A On-board unit, additional requirements

BS EN ISO 6888-2. Microbiology of the food chain. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 2. Technique using rabbit plasma fibrinogen agar medium

Tracked Changes. Inflatable play equipment Safety requirements and test methods

Tracked Changes. Plastics. Generic identification and marking of plastics products

BS EN 62037-1. Passive RF and microwave devices, intermodulation level measurement Part 1. General requirements and measuring methods

Tracked Changes. Textiles. Quantitative chemical analysis Mixtures of polypropylene fibres with certain other fibres (method using xylene)

Tracked Changes. Industrial-process control valves Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

Tracked Changes. Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1

Tracked Changes. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Traffic flow and prediction application (TPEG2-TFP)

BS ISO 14132-3. Optics and photonics. Vocabulary for telescopic systems Part 3. Terms for telescopic sights

Tracked Changes. Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

Tracked Changes. Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing

Tracked Changes. Electrically propelled road vehicles. Vocabulary

Tracked Changes. Technical product documentation. Representation of splines and serrations

Tracked Changes. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification

Tracked Changes. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines Tyre designation and dimensions, and approved rim contours

BS ISO/IEC 29500-2. Document description and processing languages. Office Open XML file formats Part 2. Open packaging conventions

Tracked Changes. Optics and photonics. Microlens arrays Vocabulary

Tracked Changes. Tests for electric cables under fire conditions. Circuit integrity Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

HD 60364-7-708 AMD1. Low-voltage electrical installations Part 7-708. Requirements for special installations or locations. Caravan parks, camping parks and similar locations

Tracked Changes. Ships and marine technology. Shipboard incinerators. Requirements

Tracked Changes. Erythema reference action spectrum and standard erythema dose

Tracked Changes. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)

Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of mesophilic lactic acid bacteria. Colony-count technique at 30°C

Tracked Changes. Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods

Tracked Changes. Fire resistance tests for non-loadbearing elements Walls

Tracked Changes. Intelligent transport systems. Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) Message management container (TPEG2-MMC)

BS ISO 19005-4. Document management. Electronic document file format for long-term preservation Part 4. Use of ISO 32000-2 (PDF/A-4)

Tracked Changes. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines Tyre load ratings

Tracked Changes. Electromechanical switches for use in electrical and electronic equipment Generic specification

Tracked Changes. Intelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) UML to binary conversion rules (TPEG2-UBCR)

BS ISO 37301. Compliance management systems. Requirements with guidance for use

Water quality. Radon-222 Test method using two-phase liquid scintillation counting

Tracked Changes. Dryers and ovens, in which flammable substances are released. Safety requirements

Tracked Changes. Agricultural machinery. Slurry tankers. Safety

Tracked Changes. Copper and copper alloys. Profiles and bars for general purposes

Tracked Changes. Intelligent transport systems. Cooperative ITS. Using V2I and I2V communications for applications related to signalized intersections

Paints and varnishes. Wettability Measurement of the contact angle on a tilt stage (roll-off angle)

Tracked Changes. Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors)

Tracked Changes. Aerospace series. Cable ties for harnesses Plastic cable ties. Operating temperatures. 65 °C to 105 °C and - 65 °C to 150 °C. Product standard

Water quality. Radium-226 Test method using emanometry

Tracked Changes. Cranes. Wire ropes. Care and maintenance, inspection and discard

Tracked Changes. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer

Tracked Changes. Flat products made of steels for pressure purposes General requirements

Telecommunications bonding networks for buildings and other structures

Paints and varnishes. Wettability Terminology and general principles

Tracked Changes. Industrial trucks. Safety requirements and verification Regional requirements for countries outside the European Community

Tracked Changes. Refrigerated display scooping cabinets and pozzetto for gelato. Classification, requirements, performance and energy consumption testing

Tracked Changes. Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation

Paints and varnishes. Wettability Determination of the surface free energy of solid surfaces by measuring the contact angle

Tracked Changes. Space product assurance. Crimping of high-reliability electrical connections

Tracked Changes. Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials Designation system and basis for specifications

Tracked Changes. Dimensions of probes and terminal units for medical gas supply systems. Requirements

Paints and varnishes. Wettability Measurement of dynamic contact angle

Tracked Changes. Medical electrical equipment Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers

Tracked Changes. Mountaineering equipment. Crampons. Safety requirements and test methods

Paints and varnishes. Wettability Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy

Paints and varnishes. Wettability Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension

BS EN 15955. Railway applications. Infrastructure. Demountable machines, trailers and associated equipment. General safety and technical requirements for travelling and working

Tracked Changes. Hydrometry. Open channel flow measurement using thin-plate weirs

BS 1722-2. Fences Part 2. Specification for strained wire and wire mesh netting fences

Tracked Changes. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery

Tracked Changes. Windows and doors Code of practice for the survey and installation of windows and external doorsets

Tracked Changes. Brazing. Filler metals

Tracked Changes. Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification

Tracked Changes. Plastics and rubber machines. Two-roll mills. Safety requirements

Tracked Changes. Fixed fire protection systems. Industrial and commercial watermist systems Fire performance tests and requirements for watermist systems for the protection of combustion turbines and machinery spaces with volumes up to and including 80 m³

Tracked Changes. Water quality. Detection and quantification of $iL$ie$ig$ii$io$in$ie$il$il$ia spp. and/or $iL$ie$ig$ii$io$in$ie$il$il$ia $ip$in$ie$iu$im$io$ip$ih$ii$il$ia by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)

Tracked Changes. Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

Tracked Changes. Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability

Tracked Changes. Fibreboards. Specifications Requirements for softboards

Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performance requirements

Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80°C

Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730°C

Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C

Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C

Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C

Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C

Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C