This clause of Part 1 is replaced by the following: This document applies to automatic displacement electrical controls " for use in, on, or in association with appliances for household and similar use; NOTE 1 Through this document, the word control means displacement electrical control . EXAMPLE 101 Displacement electrical controls used in electrical pressusre cookers with gross volume up to 25litres, with working pressure over 4 kPa and less than 150 kPa. " that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; " used in, on, or in association with equipment that use electricity; " that are mechanically or electrically operated, responsive to change of position of point of action. NOTE 2 Requirements for manual switches not forming part of an automatic control are covered in IEC 61058-1-1. This document applies to - inherent safety of automatic electro-mechanical displacement electrical controls; - functional safety of automatic electro-mechanical displacement electrical controls; - the operating values, operating times, and operating sequences where such are associated with equipment safety; - displacement electrical controls having temperature sensing element(s), in which cases additional requirements can be considered to be necessary. Requirements for temperature sensing controls are included in IEC 60730-2-9. This document specifies the requirements for construction, operation and testing of automaticdisplacement electrical controls used in, on, or in association with equipment. This document does not: " apply to automatic electronic controls " take into account the response value of an automatic action of a control, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer shall apply. NOTE 101 For more information about guidance to the application of displacement electrical controls see Annex AA.