BS EN 4881. Aerospace series. Micro-arc oxidation of aluminium and aluminium alloys

BS EN ISO 20776-2. Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test Part 2. Evaluation of performance of antimicrobial susceptibility test devices against reference broth micro-dilution

BS EN IEC 61869-1. Instrument transformers Part 1. General requirements

BS EN 17649. Gas infrastructure. Safety Management System (SMS) and Pipeline Integrity Management System (PIMS). Functional requirements

BS EN 50632-2-17 AMD1. Electric motor-operated tools. Dust measurement procedure Part 2-17. Particular requirements for routers and trimmers

BS EN IEC 61557-9. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 9. Equipment for insulation fault location in IT systems

BS EN ISO 14982-2. Agricultural and forestry machinery. Electromagnetic compatibility Part 2. Additional EMC requirements for functional safety

BS EN ISO 14982-1. Agricultural and forestry machinery. Electromagnetic compatibility Part 1. General EMC requirements

BS EN IEC 80000-15. Quantities and units Part 15. Logarithmic and related quantities, and their units

BS EN ISO 11296-9. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 9. Lining with a rigidly anchored plastics inner layer

Tracked Changes. Medical devices. Information to be supplied by the manufacturer

BS EN IEC 61800-3. Adjustable speed electrical power drive systems Part 3. EMC requirements and specific test methods for PDS and machine tools with embedded PDS

BS EN IEC 61000-4-2. Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques. Electrostatic discharge immunity test

BS EN IEC 62783-1. Twinax cables for digital communications Part 1. Generic specification

BS 8561. Mechanical fittings for polyethylene barrier pipe and mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods

BS EN IEC 60601-2-2 AMD1. Medical electrical equipment Part 2-2. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories

Endoscopes. Medical endoscopes and endotherapy devices Particular requirements for capsule endoscopes

BS EN IEC 61557-14. Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 14. Equipment for testing the safety of electrical equipment for machinery

BS EN IEC 60286-3. Packaging of components for automatic handling Part 3. Packaging of surface mount components on continuous tapes

BS EN 351-1. Durability of wood and wood-based products. Preservative-treated solid wood Part 1. Classification of preservative penetration and retention

BS EN IEC 62561-6. Lightning protection system components (LPSC) Part 6. Requirements for lightning strike counters (LSC)

BS EN ISO 9241-20. Ergonomics of human-system interaction Part 20. An ergonomic approach to accessibility within the ISO 9241 series

Medical devices. Information to be supplied by the manufacturer

BS EN ISO 6165. Earth-moving machinery. Basic types. Identification and terms and definitions

BS ISO 16494. Heat recovery ventilators and energy recovery ventilators. Method of test for performance

Food safety management systems. Requirements for any organization in the food chain

Food safety management systems. Requirements for any organization in the food chain

BS EN 62841-4-2 AMD1. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 4-2. Particular requirements for hedge trimmers

BS ISO 6460-1. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption Part 1. General test requirements

BS EN 62841-4-2 AMD AA. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety Part 4-2. Particular requirements for hedge trimmers

BS ISO 10326-2. Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Part 2. Application to railway vehicles

BS IEC 60092-303. Electrical installations in ships Part 303. Equipment. Power transformers and reactors

BS EN IEC 62899-202. Printed electronics Part 202. Materials. Conductive ink

BS EN ISO 81060-3.2. Non-invasive sphygmomanometers Part 3. Clinical investigation of continuous automated measurement type

BS ISO 11400. Nickel, ferronickels and nickel alloys. Determination of phosphorus content. Phosphovanadomolybdate spectrometric method

BS EN ISO 18778. Respiratory equipment. Particular requirements for basic safety and essential performance of equipment for infant cardiorespiratory monitors

Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems General requirements

BS EN IEC 60966-3-4. Radio frequency and coaxial cable assemblies Part 3-4. Detail specification for semi-flexible cable assemblies (jumper), Frequency range up to 6GHz, Type 50-141 semi-flexible coaxial cable

BS EN 351-2. Durability of wood and wood-based products. Preservative-treated solid wood Part 2. Guidance on sampling for the analysis of preservative-treated wood

BS EN 1467. Natural stone. Rough blocks. Requirements

BS EN 1468. Natural stone. Rough slabs. Requirements

BS ISO 37182. Smart community infrastructures. Smart transportation for energy saving in bus transportation services

BS EN IEC 60966-3-3. Radio frequency and coaxial cable assemblies Part 3-3. Detail specification for semi-flexible cable assemblies (jumper), Frequency range up to 18GHz, Type 50-141 semi-flexible coaxial cable

BS ISO 7876-5. Fuel injection equipment. Vocabulary Part 5. Common rail fuel injection system

BS EN 60269-1 AMD3. Low-voltage fuses Part 1. General requirements

BS EN IEC 60118-16. Electroacoustics. Hearing aids Part 16. Definition and verification of hearing aid features

BS EN IEC 63299. Classification of magnetic powder cores

BS 99001. Quality management systems. Specific requirements for the built environment sector

PD CISPR 36 AMD1. Electric and hybrid electric road vehicles. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers below 30 MHz

BS ISO 7010 AMD124. Graphical symbols. Safety colours and safety signs. Registered safety signs

BS EN 17670-2. Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Manholes, inspection chambers and road gullies for storm water systems made of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2. Specification for road gullies

BS ISO 7010 AMD125. Graphical symbols. Safety colours and safety signs. Registered safety signs

BS ISO 7010 AMD126. Graphical symbols. Safety colours and safety signs. Registered safety signs

Buildings and civil engineering works. Vocabulary Facility management terms

Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies

BS EN 16261-1. Pyrotechnic articles. Fireworks, category F4 Part 1. Terminology

BS EN 60794-1-307. Optical fibre cables Part 1-307. Generic specification. Basic optical cable test procedures. Cable element test methods. Tube kinking, method G7

BS 11130. Cardboard baby boxes for domestic use. Safety requirements and test methods

BS ISO 23765. Ships and marine technology. Marine environment protection. Guidelines for a method of collecting ship's fuel oil consumption data

BS EN ISO 21805. Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems

BS EN IEC 62631-3-12. Dielectric and resistive properties of solid insulating materials Part 3-12. Determination of resistive properties (DC Methods). Volume resistance and volume resistivity, method for casting resins

Food safety management systems. A practical guide

BS EN 17662. Execution of steel structures and aluminium structures. Environmental Product Declarations. Product category rules complementary to EN 15804 for Steel, Iron and Aluminium structural products for use in construction works

BS 1377-3 AMD1. Methods of test for soils for civil engineering purposes Part 3. Chemical and electro-chemical testing

BS EN 60400 AMD2. Lampholders for tubular fluorescent lamps and starterholders

BS EN IEC 62146-2. Grading capacitors for high-voltage alternating current circuit-breakers Part 2. TRV capacitors

BS EN ISO 15537. Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

Explosive atmospheres Equipment in adverse service conditions

BS EN ISO 3459. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leak tightness under negative pressure

Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for cabinet X-ray systems

BS EN 61131-9. Programmable controllers Part 9. Single-drop digital communication interface for small sensors and actuators (SDCI)

BS HD 60364-4-42. Low-voltage electrical installations Part 4-42. Protection for safety. Protection against thermal effects

Water based surface embedded heating and cooling systems Definitions and symbols

BS EN ISO 17636-2. Non-destructive testing of welds. Radiographic testing Part 2. X- and gamma-ray techniques with digital detectors

BS ISO 4664-1. Rubber, vulcanized or thermoplastic. Determination of dynamic properties Part 1. General guidance

BS ISO 965-1.2 AMD 1. ISO general purpose metric screw threads. Tolerances Part 1. Principles and basic data

BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.

BS EN IEC 63248 AMD AA. Conductors for overhead lines. Coated or cladded metallic wire for concentric lay stranded conductors

BS EN 1856-1. Chimneys. Requirements for metal chimneys Part 1. System chimney products

BS ISO 11359-2. Plastics. Thermomechanical analysis (TMA) Part 2. Determination of coefficient of linear thermal expansion and glass transition temperature

BS EN 50525-1 AMD1. Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1. General requirements

BS HD 60269-2 AMD2. Low-voltage fuses Part 2. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K

BS EN 60794-1-311. Optical fibre cables Part 1-311. Generic specification. Basic optical cable test procedures. Cable element test methods. Tensile strength and elongation test for cable elements, Method G11A

BS EN 17020-2. Extended application of test results on durability of selfclosing for fire resistance and/or smoke control doorsets and openable windows Part 2. Durability of self-closing of steel rolling shutters

BS EN 17020-1. Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows Part 1. Durability of self-closing of hinged and pivoted steel doorsets

BS EN 17020-3. Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows Part 3. Durability of self-closing of steel sliding doorsets

BS EN ISO 3501. Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force

Universal serial bus interfaces for data and power Common components. USB Power Delivery specification

Aerospace series. Steel X12CrNiMoV12-3 (1.4938). Air melted and consumable electrode remelted. Hardened and tempered. Bars. De ≤ 150 mm. 900 MPa ≤ Rm ≤ 1 100 MPa

Energy management systems. Requirements for bodies providing audit and certification of energy management systems

Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics

Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation

BS 31100. Risk management. Code of practice and guidance for the implementation of BS ISO 31000:2018

BS EN IEC 61558-2-14. Safety of transformers, reactors, power supply units and combinations thereof Part 2-14. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications

BS EN IEC 61970-301 AMD1. Energy management system application program interface (EMS-API) Part 301. Common information model (CIM) base

BS EN 50131-2-3. Alarm systems. Intrusion and hold-up systems Part 2-3. Requirements for microwave detectors

BS EN ISO 29469. Thermal insulating products for building applications. Determination of compression behaviour

BS EN IEC 62208. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements

BS EN 1856-2. Chimneys. Requirements for metal chimneys Part 2. Metal flue liners and connecting flue pipes

BS EN 15780. Ventilation for buildings. Ductwork. Cleanliness of ventilation systems

BS EN ISO 4373. Hydrometry. Water level measuring devices

BS EN IEC 60384-23. Fixed capacitors for use in electronic equipment Part 23. Sectional specification. Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors

BS ISO 22458. Consumer vulnerability. Requirements and guidelines for the design and delivery of inclusive service

BS EN IEC 61558-2-15. Safety of transformers, reactors, power supply units and combinations thereof Part 2-15. Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations

BS ISO 14520-1. Gaseous fire-extinguishing systems. Physical properties and system design Part 1. General requirements

BS EN 15512 AMD1. Steel static storage systems. Adjustable pallet racking systems. Principles for structural design

Cards and security devices for personal identification. Communication between contactless readers and fare media used in public transport Test plan for ISO/IEC 14443 (all parts)

Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Two-dimensional data coding of components and data exchange format for PE piping systems

Environmental testing Tests. Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals

Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes

Reciprocating internal combustion engines. Exhaust emission measurement Test fuels

BS ISO 5149-4. Refrigerating systems and heat pumps. Safety and environmental requirements Part 4. Operation, maintenance, repair and recovery

BS ISO 3021. Adventure tourism. Hiking and trekking activities. Requirements and recommendations

BS EN 60794-1-312. Optical fibre cables Part 1-312. Generic specification. Basic optical cable test procedures. Cable element test methods. Elongation test for buffer tubes, Method G11B

BS EN ISO 80369-2. Small-bore connectors for liquids and gases in healthcare applications Part 2. Connectors for respiratory applications

BS ISO 15037-3. Road vehicles. Vehicle dynamics test methods Part 3. General conditions for passenger cars ride comfort tests

Tracked Changes. Quality requirements for fusion welding of metallic materials Comprehensive quality requirements

Tracked Changes. Luminaires General requirements and tests

Tracked Changes. Quality requirements for fusion welding of metallic materials Standard quality requirements

BS EN 15749. Fertilizers. Determination of sulfates content using three different methods

BS EN 1591-1. Flanges and their joints. Design rules for gasketed circular flange connections Part 1. Calculation

Lampholders for tubular fluorescent lamps and starterholders

Implants for surgery. Partial and total hip-joint prostheses Determination of resistance to static load of modular femoral heads

Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes

Expert Commentary for BS EN IEC 61439-1:2021. Low-voltage switchgear and controlgear assemblies General rules

BS EN IEC 60502-4. Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 4. Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

Solid biofuels. Determination of water sorption and its effect on durability of thermally treated biomass fuels Pellets

BS EN IEC 60384-1-1. Fixed capacitors for use in electronic equipment Part 1-1. Generic blank detail specification

BS EN ISO 29766. Thermal insulating products for building applications. Determination of tensile strength parallel to faces

BS EN 13763-4. Explosives for civil uses. Detonators and detonating cord relays Part 4. Determination of resistance to abrasion of leading wires and shock tubes

BS EN 14488-3. Testing sprayed concrete Part 3. Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

BS EN ISO 12624. Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

BS EN 60794-2-10. Optical fibre cables Part 2-10. Indoor optical fibre cables. Family specification for simplex and duplex cables

BS EN 62820-1-1 AMD AA. Building intercom systems Part 1-1. System requirements. General

BS EN IEC 63118. 12V Lithium-ion Secondary Battery for Automotive SLI Applications and Auxiliary purposes Part 1. General requirements and methods of test

BS ISO 3951-1. Sampling procedures for inspection by variables Part 1. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

BS EN 15984. Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method

BS EN ISO 18278-1. Resistance welding. Weldability Part 1. General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

BS ISO 17842-2. Safety of amusement rides and amusement devices Part 2. Operation and use

BS EN 15437-1 AMD1. Railway applications. Axlebox condition monitoring. Interface and design requirements Part 1. Track side equipment and rolling stock axlebox

BS ISO 14229-5. Road vehicles. Unified diagnostic services (UDS) Part 5. Unified diagnostic services on Internet Protocol implementation (UDSonIP)

BS ISO 14229-3. Road vehicles. Unified diagnostic services (UDS) Part 3. Unified diagnostic services on CAN implementation (UDSonCAN)

BS EN ISO 6368. Petroleum, petrochemical and natural gas industries. Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders

BS ISO/IEC 29110-2-1 AMD 1. Software engineering. Lifecycle profiles for Very Small Entities (VSEs) Part 2-1. Framework and taxonomy

BS ISO 17842-3. Safety of amusement rides and amusement devices Part 3. Requirements for inspection during design, manufacture, operation and use

BS ISO 10791-10. Test conditions for machining centres Part 10. Evaluation of thermal distortions

BS EN IEC 61300-2-21. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Part 2-21. Tests. Composite temperature/humidity cyclic test

Service activities relating to drinking water supply, wastewater and stormwater systems. Examples of good practices for stormwater management

Cards and security devices for personal identification. Communication between contactless readers and fare media used in public transport Implementation requirements for ISO/IEC 14443 (all parts)

Plastics. Recycled plastics. Characterization of Polyethylene (PE) recyclates

BS EN 17670-1. Plastics piping systems for non-pressure underground conveyance and storage of non-potable water. Manholes, inspection chambers and road gullies for storm water systems made of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1. Specifications for storm water manholes and inspection chambers)

Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings

Communication cables Common design rules and construction. Polyethylene sheathing compounds

Communication cables Common design rules and construction. Halogen free polyolefin based sheathing compounds for cables having improved flame and fire properties (HFFR)

BS ISO 31073. Risk management. Vocabulary

Domestic swimming pools General requirements including safety and test methods

Low-voltage switchgear and controlgear assemblies General rules

Installation and equipment for liquefied natural gas. Design of onshore installations

Electric actuators for industrial valves. General requirements

Safety of escalators and moving walks Rules for the improvement of safety of existing escalators and moving walks

Subsea equipment Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (<i>U</i>_max = 3,6 kV) to 30 kV (<i>U</i>_max = 36 kV)

BS ISO/IEC 18047-3. Information technology. Radio frequency identification device conformance test methods Part 3. Test methods for air interface communications at 13,56 MHz

General purpose fuse links for domestic and similar purposes (primarily for use in plugs). Specification

Live working. Minimum approach distances Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

Nuclear facilities. Equipment important to safety. Seismic qualification

BS EN ISO 18099. Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion

BS EN IEC 60794-1-305. Optical fibre cables Part 1-305. Generic specifications. Basic optical cable test procedures. Cable element test methods. Ribbon tear (separability), Method G5

BS EN IEC 60793-1-1. Optical fibres Part 1-1. Measurement methods and test procedures. General and guidance

BS EN ISO 29468. Thermal insulating products for building applications. Determination of flatness

BS EN ISO 29770. Thermal insulating products for building applications. Determination of thickness for floating-floor insulating products

BS EN 12477. Protective gloves for welders

BS EN 13630-10. Explosives for civil uses. Detonating cords and safety fuses Part 10. Determination of initiating capability of detonating cords

BS EN 16261-4. Pyrotechnic articles. Fireworks, Category F4 Part 4. Minimum labelling requirements and instructions for use

BS ISO 24416. Water reuse in urban areas. Guidelines for water reuse safety evaluation: Stability evaluation of reclaimed water

BS ISO 4760. Laminate Flooring. Topical Moisture Resistance. Assembled Joint

BS IEC 60747-18-4. Semiconductor devices Part 18-4. Semiconductor bio sensors. Evaluation method of noise characteristics of lens-free CMOS photonic array sensors

Cards and security devices for personal identification. Contactless proximity objects Radio frequency power and signal interface

BS EN 60749-10. Semiconductor devices. Mechanical and climatic test methods Part 10. Mechanical shock. Device and subassembly

BS EN 60794-1-1. Optical fibre cables Part 1-1. Generic specification. General

BS EN ISO 18097. Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature

BS EN IEC 61857-33. Electrical insulation systems. Procedures for thermal evaluation Part 33. Multifactor evaluation with increased factors at elevated temperature

BS EN ISO 29466. Thermal insulating products for building applications. Determination of thickness

BS EN 60793-1-44. Optical fibres Part 1-44. Measurement methods and test procedures. Cut-off wavelength

BS ISO 24482. Large yachts. Navigational bridge visibility

BS EN ISO 4528. Vitreous and porcelain enamel finishes. Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

BS EN 13763-24. Explosives for civil uses. Detonators and detonating cord relays Part 24. Determination of the electrical non-conductivity of shock tube

BS EN 13630-7. Explosives for civil uses. Detonating cords and safety fuses Part 7. Determination of reliability of initiation of detonating cords

BS EN 15437-2. Railway applications. Axlebox condition monitoring. Interface and design requirements Part 2. Performance and design requirements of on-board systems for temperature monitoring

BS ISO 8000-1. Data quality Part 1. Overview

Bushings for transformers and reactor cable boxes not exceeding 36 kV

BS ISO 24020. Corrosion of metals and alloys. Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit

Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet

Plastics. Determination of burning behaviour by oxygen index High gas velocity test

Food products. Guidance on how to express vitamins and their vitamers content

Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers

Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an AC/DC supply. EMC requirements for off board electric vehicle charging systems

Direct acting indicating analogue electrical measuring instruments and their accessories Recommended test methods

BS ISO 23958-1. Traditional Chinese Medicine. Dermal needle for single use Part 1. Tapping type

BS EN ISO 10121-3. Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 3. Classification system for GPACDs applied to treatment of outdoor air

BS EN 17665. Packaging. Test methods and requirements to demonstrate that plastic caps and lids of single-use beverage containers with a capacity of up to three litres remain attached to the containers during the product's intended use stage

BS ISO 14520-17. Gaseous fire-extinguishing systems. Physical properties and system design Part 17. Halocarbon Blend 55

BS EN 13938-5. Explosives for civil uses. Propellants and rocket propellants Part 5. Determination of voids and fissures

BS ISO 6826. Reciprocating internal combustion engines. Fire protection

BS EN 13763-11. Explosives for civil uses. Detonators and detonating cord relays Part 11. Determination of resistance to damage by dropping of detonators and relays

BS ISO 20397-1. Biotechnology. General requirements for massively parallel sequencing Part 1. Nucleic acid and library preparation

BS ISO 20602 AMD1. Ships and marine technology. Check valves for use in low temperature applications. Design and testing requirements

BS EN ISO 3421. Petroleum and natural gas industries. Drilling and production equipment. Offshore conductor design, setting depth, and installation

BS EN 16261-2. Pyrotechnic articles. Fireworks, Category F4 Part 2. Requirements

BS ISO 24360. Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Determination of the cross tension strength

BS EN 13763-12. Explosives for civil uses. Detonators and detonating cord relays Part 12. Determination of resistance to hydrostatic pressure

BS EN 16265. Pyrotechnic articles. Other pyrotechnic articles. Ignition devices

BS EN ISO 2078. Textile glass. Yarns. Designation

BS ISO 21234. Heavy commercial vehicles and buses. Moment of inertia measurement

BS EN 13631-2. Explosives for civil uses. High explosives Part 2. Determination of thermal stability of explosives

BS EN ISO 29768. Thermal insulating products for building applications. Determination of linear dimensions of test specimens

BS EN 16261-3. Pyrotechnic articles. Fireworks, Category F4 Part 3. Test methods

BS EN ISO 23659. Sports and recreational facilities. Trampoline parks. Safety requirements

BS ISO 24338. Laminate floor coverings. Determination of abrasion resistance

BS EN 13630-11. Explosives for civil uses. Detonating cords and safety fuses Part 11. Determination of velocity of detonation of detonating cords

BS EN 13631-5. Explosives for civil uses. High explosives Part 5. Determination of resistance to water

BS IEC 62973-5. Railway applications. Rolling stock. Batteries for auxiliary power supply systems Part 5. Lithium-ion batteries

BS ISO 4821. Plain bearings. Dynamic adhesion test method for DLC coated parts under lubricated condition

BS ISO 12210. Cranes. Anchoring devices for in-service and out-of-service conditions

BS EN 13938-3. Explosives for civil uses. Propellants and rocket propellants Part 3. Determination of deflagration to detonation transition

BS EN ISO 29465. Thermal insulating products for building applications. Determination of length and width

BS EN 13631-6. Explosives for civil uses. High explosives Part 6. Determination of resistance to hydrostatic pressure

BS EN ISO 12628. Thermal insulating products for building equipment and industrial installations. Determination of dimensions, squareness and linearity of preformed pipe insulation

BS ISO/IEC 24383. Information technology. Physical network security for the accommodation of customer premises cabling infrastructure and information technology equipment

BS ISO 23766. Thermal insulating products for industrial installations. Determination of the coefficient of linear thermal expansion at sub-ambient temperatures

BS EN 61754-20 AMD1. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Part 20. Type LC connector family

BS IEC 61196-1-125. Coaxial communication cable Part 1-125. Electrical test methods. Test for equivalent permittivity and equivalent dissipation loss of dielectric

BS EN IEC 61196-1-126. Coaxial communication cables Part 1-126. Electrical test methods. Corona extinction voltage

BS EN ISO 1. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties

BS EN ISO 12629. Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation

Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Common requirements

Electronic displays Generic. Practical information on the use of light measuring devices

Metallic coatings. Measurement of coating thickness. Profilometric method

Information technology. Biometric System-on-Card Physical characteristics

Intelligent transport systems. Roadside modules SNMP data interface Overview

Information technology. Smart City ICT reference framework Smart city business process framework

Green tea. Vocabulary

Rubber and plastics hoses and hose assemblies. Hydrostatic testing

BS ISO 7851. Fertilizers, soil conditioners and beneficial substances. Classification

Alarm systems. Alarm transmission systems and equipment Requirements for Receiving Centre Transceiver (RCT)

GIS (geospatial) / BIM interoperability

Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation External effective dose of the caregivers after release from the hospital

Acoustics. Laboratory measurement of sound insulation of building elements Application rules for specific products

Durability of wood and wood-based products. Test method against wood destroying basidiomycetes Assessment of inherent or enhanced durability

BS ISO 23958-2. Traditional Chinese Medicine. Dermal needle for single use Part 2. Roller Type

BS EN ISO 24676. Gas cylinders. Compatibility of cylinder and valve materials with gas contents Part 6. Oxygen pressure surge testing

BS ISO 3749. Glass syringes. Determination of extractable Tungsten

Rotating electrical machines. Test methods and apparatus for the measurement of the operational characteristics of brushes

Paper, board, pulps and cellulosic nanomaterials. Determination of dry matter content by oven-drying method Materials in solid form

Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment

Paper, board, pulps and cellulosic nanomaterials. Determination of dry matter content by oven-drying method Suspensions of cellulosic nanomaterials

Expert Commentary for BS EN IEC 61439-2:2021. Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies

BS EN IEC 60404-3. Magnetic materials Part 3. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester

BS EN IEC 61156-13. Multicore and symmetrical pair/quad cables for digital communications Part 13. Symmetrical single pair cables with transmission characteristics up to 20 MHz. Horizontal floor wiring. Sectional specification

BS ISO 23326. Human Resource Management. Employee engagement. Guidelines

BS ISO 24143. Information and documentation. Information Governance. Concept and principles

BS EN 15714-5. Industrial valves. Actuators Part 5. Pneumatic linear actuators for industrial valves. Basic requirements

BS EN IEC 61196-1-1. Coaxial Communication Cables Part 1-124. Electrical test methods. Test for coupling loss of radiating cable

BS EN IEC 63305. Underwater Acoustics. Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz

BS ISO 23945-1. Test methods for sprayed concrete. Part 1. Flash setting accelerating admixtures. Setting time

BS ISO/IEC 19540-2. Information technology. Object Management Group Unified Architecture Framework (OMG UAF) Part 2. Unified Architecture Framework Profile (UAFP)

BS EN IEC 60601-2-83 AMD1. Medical electrical equipment Part 2-83. Particular requirements for the basic safety and essential performance of home light therapy equipment

BS EN 13763-18. Explosives for civil uses. Detonators and detonating cord relays Part 18. Determination of series firing current of electric detonators

BS EN IEC 62933-1. Electrical energy storage (EES) systems Part 1. Vocabulary

BS ISO 21395-2. Optics and photonics. Test method for refractive index of optical glasses Part 2. V-block Refractometer Method

BS EN IEC 60704-2-19. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Part 2-19. Particular requirements for air cleaners

BS IEC 63143. Electroacoustics. Modular instrumentation for acoustic measurement

BS EN 13631-13. Explosives for civil uses. Explosives Part 13. Determination of density

BS IEC 62629-62-11. 3D Display Devices Part 62-11. Measurement methods for transparent virtual-image type. Optical

BS ISO/IEC 19944-2. Cloud computing and distributed platforms. Data flow, data categories and data use. Part 2. Guidance on application and extensibility

BS EN IEC 62641 AMD AA. Conductors for overhead lines. Aluminium and aluminium alloy wires for concentric lay stranded conductors

BS ISO/IEC 19540-1. Information technology. Object Management Group Unified Architecture Framework (OMG UAF) Part 1. Domain Metamodel (DMM)

BS ISO 20507. Fine ceramics (advanced ceramics, advanced technical ceramics). Vocabulary

BS EN IEC 60747-18-5. Semiconductor devices Part 18-5. Semiconductor bio sensors. Evaluation method for light responsivity characteristics of lens-free CMOS photonic array sensor package modules by incident angle of light

Extended application of test results on durability of self-closing for doorsets and openable windows Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows

Maritime navigation and radiocommunication equipment and systems. Cybersecurity. General requirements, methods of testing and required test results

Education and learning services. Vocabulary

Woodworking machines. Safety Tenoning/profiling machines

Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V

Acoustics. Acoustic quality of open office spaces

Terminations for steel wire ropes. Safety Solid thimbles

Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum

Geographic information. Linear referencing

Small-bore connectors for liquids and gases in healthcare applications Connectors for intravascular or hypodermic applications

Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements

Fibre ropes. Polyamide. 3-, 4-, 8- and 12-strand ropes

Quality requirements for fusion welding of metallic materials Standard quality requirements

Quality requirements for fusion welding of metallic materials Elementary quality requirements

Water based surface embedded heating and cooling systems Floor heating. Methods for the determination of the thermal output using calculations and experimental tests

Gas cylinders. Gases and gas mixtures. Determination of toxicity for the selection of cylinder valve outlets

Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bars and sections

Direct acting indicating analogue electrical measuring instruments and their accessories title Special requirements for frequency meters

Information and documentation. International archives statistics

Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from thermosetting coating powder

Water based surface embedded heating and cooling systems Dimensioning

Space systems. Pressure components and pressure system integration

Acoustics. Laboratory measurement of sound insulation of building elements Measurement procedures and requirements

Copper and copper alloys. Copper rod, bar and wire for general electrical purposes

Environmental testing Tests. Test Z/AD: Composite temperature/humidity cyclic test

Quality requirements for fusion welding of metallic materials Comprehensive quality requirements

Smoke and heat control systems Specifications for powered smoke and heat exhaust ventilators

Acoustics. Laboratory measurement of sound insulation of building elements Measurement of airborne sound insulation

Small craft. Electrically operated bilge pumps

BS EN 17669. Energy Performance Contracting. Minimum requirements

Road vehicles. Open Test sequence eXchange format (OTX) Expanded extensions interface definition

BS ISO 4657. Assessment specification of coalbed methane resources

BS HD 604-S2. 0,6/1,0 kV power cables with special fire performance for use in power stations and similar installations

BS HD 60364-7-730. Low-voltage electrical installations Part 7-730. Requirements for special installations or locations. Onshore units of electrical shore connections for inland navigation vessels

BS ISO 12312-3. Eye and face protection. Sunglasses and related eyewear Part 3. Sunglasses for running, cycling and similar active lifestyles

BS EN 15877-2 AMD1. Railway applications. Markings of railway vehicles Part 2. External markings on coaches, motive power units, locomotives and on track machines

Earth-moving machinery. Operator's manual List of references

Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installation and use of fixed fire suppression systems

Integrated circuits. Measurement of electromagnetic emissions Measurement of conducted emissions. 1 Ω/150 Ω direct coupling method

Road marking materials. Retroreflecting road studs Road test performance specifications

Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies

Acoustics. Laboratory measurement of sound insulation of building elements Requirements for test facilities and equipment

Water based surface embedded heating and cooling systems Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling

Direct acting indicating analogue electrical measuring instruments and their accessories Special requirements for wattmeters and varmeters

Fibre ropes. Polyester - 3-, 4-, 8- and 12-strand ropes

Acoustics. Laboratory measurement of sound insulation of building elements Measurement of impact sound insulation

Aerospace. Anodic treatment of titanium and titanium alloys. Sulfuric acid process

Mechanical structures for electrical and electronic equipment. Tests for IEC 60917 and IEC 60297 series Security aspects for indoor cabinets

Energy Management system application program interface (EMS-API) Dynamics profile

Textiles. Determination of spirality after laundering Woven and knitted garments

Road vehicles. Video communication interface for cameras (VCIC) Camera message dictionary

Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes

Copper, lead, zinc and nickel concentrates. sampling procedures for determination of metal and moisture content

Acoustics. Test methods for the qualification of the acoustic environment Qualification of free-field environments

Imperfections in thermoplastics welded joints. Quality levels

Application integration at electric utilities. System interfaces for distribution management Common distribution power system model profiles

Petroleum, petrochemical and natural gas industries. Life cycle costing

Ships and marine technology. Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks

Equipment for crop protection. Knapsack combustion engine-driven airblast sprayers. Safety and environmental requirements and test methods

Safety of toys. Interpretations Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14

Direct acting indicating analogue electrical measuring instruments and their accessories Special requirements for ammeters and voltmeters

Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lift Accessibility to lifts for persons including persons with disability

Aseptic processing of health care products Isolator systems

Optical amplifiers. Test methods Power and gain parameters. Optical power meter method

Leather. Leather for apparel (excluding furs). Specifications and sampling procedures

Security techniques. Extension to ISO/IEC 27001 and ISO/IEC 27002 for privacy information management. Requirements and guidelines

BS ISO/IEC 38507. Information technology. Governance of IT. Governance implications of the use of artificial intelligence by organizations

Glass‐reinforced thermosetting plastics (GRP) pipes. Determination of the apparent axial long‐term modulus of pipes subject to beam bending

Microbiology of the food chain. Methods for the detection of Anisakidae L3 larvae in fish and fishery products UV-press method

Microbiology of the food chain. Methods for the detection of Anisakidae L3 larvae in fish and fishery products Artificial digestion method

BIM Properties for lighting. Luminaires and sensing devices

Cranes. Offshore cranes Light offshore cranes

Systems and software engineering. Life cycle management. Specification for process description

Binders for paints and varnishes. Linseed stand oil. Requirements and methods of test

Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials

Welding. Grouping systems for materials. European materials

Plastics. Determination of the transient extensional viscosity of polymer melts

Framework for energy market communications Balancing processes, contextual and assembly models for European style market

Cement Portland-composite cement CEM II/C-M and Composite cement CEM VI

Essential oils of bergamot, lemon, bitter orange and lime, fully or partially reduced in bergapten. Determination of bergapten content by high-performance liquid chromatography (HPLC)

Paper and board. Determination of roughness/smoothness (air leak methods) Print-surf method